Instruction/ maintenance manual of the product L704 SIIG
Go to page of 8
04-0541B TV Size: 32" - 55” Max load capacity: 121lbs/55kg Wall distance: 0.43/11mm Bubble level included Ultra-Thin LED/LCD TV Mount - 32" to 55" IMPORTANT: If you don't understand the installation instructions, please consult an installation specialist Ultra-Thin LED/LCD TV Wall Mount Material: 2.
Caution AG B H-1 C H-2 DI EJ FK L (×4) M8×16 screw (×4) M6×16 screw (×1) Bubble level (×4) M5×35 screw (×4) M8×80 bolt (×4) M8×35 screw (×4) M8 spacer (×4) M6×35 screw (×4) Concrete anchor It is recommended that two people perform the installation.
1 2 3 4 5 3 4 5 7 8 a) Wood Stud Installation You should mark two positions total. Stud finder for drywall installation NOTE: When mounting to wood studs, the two wood studs must be a minimum of 16" apart.
2 3 4 5 6 7 8 9 NOTE: The concrete anchors must be used for concrete installation. If necessary, a hammer can be used to lightly tap each anchor into place so that they are flush with the wall. Tighten the bolt with the 1/2" socket or 1/2" open-end wrench by turning clockwise until tight.
6 7 2 Determine which screw (A/B/C/D/E/F) is of the correct length by carefully inserting a straw, or toothpick, and mark how deep the mounting point is. Cut strings to desired length, ensure enough string remains for easy access and use for installation & removal (figure a4).
1 2 3 Check the mounting screws every two months for tightness. To secure TV rails, pull strings down to retract locking mechanism & lower bottom of TV to the wall. Let go of strings to engage the locking mechanism. Hook the TV rails over the top of the wall plate and lower on to wall plate.
SIIG, Inc. 6078 Stewart Avenue Fremont, CA 94538-3152, USA RMA #: ________________ Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions.
November, 2010 Copyright © 2010 by SIIG, Inc. All rights reserved. Ultra-Thin LED/LCD TV Mount - 32" to 55" is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Other names used in this publication are for identification only and may be trademarks of their respective owners.
An important point after buying a device SIIG L704 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG L704 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG L704 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG L704 you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG L704 will certainly help you make a decision on the purchase.
If you already are a holder of SIIG L704, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG L704.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG L704. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG L704 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
