Instruction/ maintenance manual of the product 04-0621A SIIG
Go to page of 8
04-0621A Max load capacity:100 lbs Tilt angle: 0-12 degrees Installation and Operating Instructions Wall distance: 3.75" / 95mm Built-in bubble level Universal Mounting Pattern Full Motion TV Mou.
AG BH CI DJ EK FL M (x2) cable ties (30cm) Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in damage to the display and/or damage to the mounting surface. Recommended mounting surfaces: wood stud and solid-flat concrete.
1 2 3 4 a) Wood Stud Installation 3 4 5 Figure 1 6 7 8 Phillips head screw driver Place the wall plate against the wall and line up the mounting slots with the drilled holes. Check the bubble level to verify that the wall plate is level. CAUTION : Do not release the wall plate until it is properly mounted and secured to the wall.
1 2 3 4 5 6 7 Figure 2 1 2 3 4 Figure 3 Figure 4 Figure 4-1 Place your TV screen down on a soft, flat surface, and locate the threaded mounting points that are located on the back of the display (Figure 3). Note: The concrete anchors must be used for concrete and brick installation.
1 2 3 4 5 Figure 5 Figure 8 Figure 7 Figure 6 Figure 9 Swivel Adjustment Figure 10 Maintenance Check the mounting screws every two months for tightness. Step 3 Final Installation & Adjustment Hang the display plate onto the top of the wall plate and slip onto the wall plate as shown (Figure 5).
Blank Page 6.
A) If it is within the store's return policy period, please return the product to the store where you purchased from. B) If your purchase has passed the store's return policy period, please follow these steps to have the product repaired or replaced.
April, 2010 Copyright © 2010 by SIIG, Inc. All rights reserved. Full Motion TV Mount - 23" to 42" PRODUCT NAME Full Motion TV Mount - 23" to 42" is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc.
An important point after buying a device SIIG 04-0621A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG 04-0621A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG 04-0621A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG 04-0621A you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG 04-0621A will certainly help you make a decision on the purchase.
If you already are a holder of SIIG 04-0621A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG 04-0621A.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG 04-0621A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG 04-0621A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
