Instruction/ maintenance manual of the product EX2101 SIIG
Go to page of 8
1 04-0617B DP SuperSpeed USB 3.0 2-Port PCIe i/e Quick Installation Guide Introducing the USB 3.0 2-Port PCIe i/e The DP SuperSpeed USB 3.0 2-Port PCIe i/e adds two USB 3.0 ports (1 internal & 1 external) to your PCIe-enabled desktop PC enhancing existing systems with the latest USB 3.
2 System Requirements • Desktop PC with an available PCIe slot • Windows ® 7 (32-/64-bit) / Vista (32-/64- bit) / XP (32-/64-bit) Package Contents • DP SuperSpeed USB 3.0 2-Port PCIe i/e adapter • Spare low profile bracket • Driver CD • Quick installation guide Layout Figure 1: Board Layout USB 3.
3 Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system.
4 5 . Carefully align the card's bus connector with the selected PCIe slot on the motherboard. Push the board down firmly, but gently, until it is well seated. 6 . Replace the slot bracket holding screw to secure the card. 7 . Replace the computer cover and reconnect the power cord.
5 For Windows Vista: At the CD Autoplay box, double click Setup . 4 . At User Account Control. For Windows 7: Click Yes . For Windows Vista: Click Continue . 5 . At Welcome, click Next . 6 . Select I accept the terms of the license agreement , click Next .
6 4 . At Welcome, click Next . 5 . Select I accept the terms of the license agreement , click Next . 6 . At Ready to Install the Program, click Install . 7. Wait while the InstallShield Wizard configures your system. Depending on your system hardware this process may take several minutes to complete.
7 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
PRODUCT NAME DP SuperSpeed USB 3.0 2-Port PCIe i/e FCC RULES: TESTED TO COMPL Y WITH FCC P AR T 15, CLASS B OPERA TING ENVIRONMENT : FOR HOME OR OFFICE USE FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules.
An important point after buying a device SIIG EX2101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG EX2101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG EX2101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG EX2101 you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG EX2101 will certainly help you make a decision on the purchase.
If you already are a holder of SIIG EX2101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG EX2101.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG EX2101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG EX2101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
