Instruction/ maintenance manual of the product 04-0343C SIIG
Go to page of 12
1 CyberPro PCI 4S Quick Installation Guide 04-0343C Introducing the CyberPro PCI 4S The CyberPro PCI 4S high-speed serial I/O card provides four additional 9-pin serial ports. Depending on the model purchased, this board will fit into either a Full or Low Profile chassis.
2 Package Contents • CyberPro PCI 4S board • 4-port fan-out cable • Low profile bracket (Dual Profile board only) • Driver CD • Quick installation guide Layout Full profile bracket 4-pin power connector (optional)* JP1 (S1) JP4 (S4) JP2 (S2) JP3 (S3) 44-pin connector Figure 1.
3 Fan-out Cable 44-pin connector Serial ports DB9 (9-pin) Figure 2. Fan-out cable Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed.
4 5. Set JP1 - JP4 jumper settings to the desired voltage only if your serial device(s) needs additional power from the serial port. However, most serial devices do not require additional power. For more information, see Figure 1 on page 2 . Skip this step if power is not required.
5 Windows 98/98SE 1. At the Add New Hardware Wizard , click Next . 2. Select Search for the best driver for your device (Recommend) , then click Next . 3. Insert the driver CD, check Specify a location , uncheck the other boxes, , type in D:9x , then click Next .
6 Windows NT 4.0 1. From the desktop click Start, then Run . 2 . Insert the driver CD, type in D:NT4Install_serial.exe, then click OK . (Change D: to match your CD-ROM drive letter) 3. Click Next when the Welcome window appears. 4. Select Install , then click Next .
7 32-bit Windows XP/Server 2003 1. At the Found New Hardware Wizard, insert the driver CD. For XP w/SP1 or earlier/ Server 2003 : go to step #2. For XP w/SP2 or later/Server 2003 wSP1 or later : select No, not this time , click Next . 2 . Select Install the software automatically (Recommended , then click Next .
8 2. Click on the + (plus sign) in front of Ports (COM & LPT) , and CyberSerial PCI 16Cxxx... should be displayed four times. 3 . Double click Multifunction adapters , SIIG CyberPro 4S PCI board should be displayed. To Verify Windows 2000/XP/Server 2003 Installation 1.
9 Changing COM Port Address Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting. Windows 95/98/98SE/ME 1. From the Device Manager window double click Ports (COM & LPT) , then double click the CyberSerial PCI serial port you want to change.
10 Blank Page.
11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
CyberPro PCI 4S is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation.
An important point after buying a device SIIG 04-0343C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG 04-0343C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG 04-0343C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG 04-0343C you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG 04-0343C will certainly help you make a decision on the purchase.
If you already are a holder of SIIG 04-0343C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG 04-0343C.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG 04-0343C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG 04-0343C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
