Instruction/ maintenance manual of the product CE-H22911-S1 Siig
Go to page of 8
1 Introduction The HDMI Over Gigabit IP Extender Kit with IR extends HDMI signal over one Cat5/6 cable up to 330ft. Features and Benefits • Extend HDMI signals up to 100m over Cat5e/6 cabling • Su.
2 Layout Transmitter Unit (Tx) Figure 1: Transmitter side panel • DC 5V : DC 5V power jack. Plug the included power adapter here • PWR : LED indicator for power status. On/Off when the Transmitter is powered on/off • LINK : LED indicator for link status.
3 • HDMI IN : HDMI signal input port. Connect this port to your HDMI source device by using an HDMI cable (not included) • LINE : Signal output port, connected with Receiver 's LINE port by u.
4 IR Extension Cables Figure 3a: IR blaster cable Figure 3b: IR receiver cable To control the source device from Receiver 's end: 1. Plug the IR blaster cable to the Transmitter 's IR connector, then plug the IR receiver cable to the Receiver 's IR connector.
5 8. For additional extending of the HDMI signal, connect another Receiver/Repeater to the LINE port of the first Receiver/Repeater . Skip this step if extension is not needed. 9. Plug the included power adapters into the DC 5V power jack of the Transmitter and Receiver separately.
6 Gigabit Ethernet Switch Connection Figure 5: Used with Gigabit Ethernet switch HDMI source HDMI Display • Connect with the Gigabit Ethernet switch as shown in the diagram above for multiple device connections • The extension distance through CAT.
7 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals.
An important point after buying a device Siig CE-H22911-S1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siig CE-H22911-S1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siig CE-H22911-S1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siig CE-H22911-S1 you will learn all the available features of the product, as well as information on its operation. The information that you get Siig CE-H22911-S1 will certainly help you make a decision on the purchase.
If you already are a holder of Siig CE-H22911-S1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siig CE-H22911-S1.
However, one of the most important roles played by the user manual is to help in solving problems with Siig CE-H22911-S1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siig CE-H22911-S1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
