Instruction/ maintenance manual of the product CE-H22611-S1 Siig
Go to page of 12
1 Introduction The HDMI to CAT5e Daisy Chain HD Extender Kit with RS-232 & IR extends HDMI signal over one Cat5/6 cable up to 330ft and is cascade connection supported.
2 Layout Transmitter Unit (Tx) Figure 1: Transmitter side panel • DC 5V : DC 5V power jack. Plug the included power adapter here • PWR : LED indicator for power status. On/Off when the Transmitter is powered on/off • LINK : LED indicator for link status.
3 • RS-232 : RS-232 control port. Plug the included 3.5mm to RS-232 cable then an RS-232 cable here, if needed • HDMI IN : HDMI signal input port. Connect this port to your HDMI source device by using an HDMI cable (not included) • HDMI OUT : HDMI signal output port.
4 • PWR : LED indicator for power status. On/Off when the Receiver/Repeater is powered on/off • LINK : LED indicator for link status. On when the connection of Transmitter and Receiver is established and detected • RS-232: RS-232 control port. Plug the included 3.
5 2. Point your source device's remote control to the IR receiver's eye, the command will be sent to Transmitter end, and the connected source device will enforce the command accordingly. Hardware Installation 1. Power off all devices, including the source device and display.
6 6. Connect the two 3.5mm to RS-232 cables to the Transmitter and Receiver 's RS-232 ports respectively. Skip this step if RS-232 control is not needed. 7 . Connect your CAT5/6 cable between the Transmitter 's and Receiver 's LINE port.
7 Figure 7 2 2 1 HDMI source local HDMI display remote HDMI display • The extension distance through CAT. X cable is up to 100 meters for one layer Function Diagram Basic Connection 2 IR receiver cable (optional) IR blaster cable (optional) 1 CAT.
8 Advanced Connections Daisy Chain Connection Figure 8 • The extension distance through CAT. X cable is up to 100 meters for one layer HDMI Display HDMI Display Rx HDMI Display HDMI source HDMI Display Rx 1 Rx 1 2 1 2 2 2 2 1 CAT.
9 Cascade Connection Figure 9 • Cascade receivers up to 10 layers; extension distance through CAT. X cable up to 100 meters for one layer HDMI source HDMI Display HDMI Display HDMI Display HDMI Display Rx Rx Rx Tx 1 1 1 2 2 2 2 2 1 CAT.
10 Gigabit Ethernet Switch Connection Figure 10: Used with Gigabit Ethernet switch • Connect with the Gigabit Ethernet switch especially when your Tx or Rx unit has only one signal input/ output port • The extension distance through CAT.
11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals.
An important point after buying a device Siig CE-H22611-S1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siig CE-H22611-S1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siig CE-H22611-S1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siig CE-H22611-S1 you will learn all the available features of the product, as well as information on its operation. The information that you get Siig CE-H22611-S1 will certainly help you make a decision on the purchase.
If you already are a holder of Siig CE-H22611-S1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siig CE-H22611-S1.
However, one of the most important roles played by the user manual is to help in solving problems with Siig CE-H22611-S1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siig CE-H22611-S1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
