Instruction/ maintenance manual of the product CE-H21J11-S1 Siig
Go to page of 12
1 Introduction The Long Range HDMI Extender over Single Cat 5/6 with IR/ RS-232, and Ethernet provides an easy extension of HDMI signal over one Cat5/6 cable up to 330ft and also provides bi-directional RS-232, IR and Ethernet extension function.
2 Package Contents • Long Range HDMI Extender over Single Cat5/6 with IR/ RS-232, and Ethernet (Transmitterx1, Receiverx1) • Power adapter 24V/1A (2) • IR blaster cable & IR receiver cable .
3 • HDMI OUT: HDMI signal output port. Connect this port to your HDMI display by using an HDMI cable (not included) • Ethernet: Connect your Ethernet cable here to establish an extended network co.
4 IR Extension Cables IR Blaster cable: Connect the IR blaster cable to your HDMI Extender's IR Blaster connector to send out IR command signals, if needed Figure 4 IR Receiver cable: Connect the IR receiver cable to your HDMI Extender 's IR Receiver connector to receive IR command signals, if needed Figure 5 1 2 1 2 3 1.
5 DIP Switch Refer to Figure 6 and Table 1 for the instructions for changing RS-232 mode by using DIP switch. Figure 6 Switch 1 Switch 2 • Firmware update mode : Push down DIP switch 2 to change to firmware update mode. Connect the RS- 232 connector on HDMI Extender to your computer for further firmware update.
6 1 5 96 Figure 7 NOTE : When the Transmitter is in DTE mode, Pin-2 of the RS-232 is in charge of sending data; when in DCE mode, Pin-3 is in charge of sending data. When Receiver is in DTE mode, the Pin-3 of the RS-232 is in charge of receiving data; when in DCE mode, the Pin-2 is in charge of receiving data.
7 Hardware Installation 1. Power off all devices, including the source HDMI device and display. 2. Connect your HDMI source (such as a Blu-ray player) to the transmitter's HDMI IN connector. 3. Connect your HDMI display (such as a LCD TV) to the receiver's HDMI OUT connector.
8 Application Basic connection HDMI signal extended over Cat5/6 cable HDMI output display Receiver Transmitter External power source External power source HDMI cable HDMI cable Cat5/6 cable Figure 8 A.
9 Optional connections Bi-directional IR connection Figure 9 HDMI output display Receiver Transmitter External power source External power source HDMI cable HDMI cable Cat5/6 cable B B C A D E HDMI input source device (DVD, PC, etc) * Connect IR blaster cable to and IR Receiver cable to to control HDMI display from Transmitter's side.
10 Bi-directional Ethernet connections Transmitter Receiver B B A A Cat5/6 cable External power source External power source PC, Network router, network switch, etc Ethernet enabled device Figure 11 F.
11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals.
An important point after buying a device Siig CE-H21J11-S1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siig CE-H21J11-S1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siig CE-H21J11-S1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siig CE-H21J11-S1 you will learn all the available features of the product, as well as information on its operation. The information that you get Siig CE-H21J11-S1 will certainly help you make a decision on the purchase.
If you already are a holder of Siig CE-H21J11-S1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siig CE-H21J11-S1.
However, one of the most important roles played by the user manual is to help in solving problems with Siig CE-H21J11-S1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siig CE-H21J11-S1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
