Instruction/ maintenance manual of the product CE-DP0611-S1 Siig
Go to page of 12
1 Introduction The DisplayPort to CAT5e Daisy Chain HD Extender Kit with RS-232 & IR extends DisplayPort signal over one Cat5/6 cable up to 330ft and is cascade connection supported.
2 Layout Transmitter Unit (Tx) Figure 1: Transmitter side panel • DC 5V : DC 5V power jack. Plug the included power adapter here • PWR : LED indicator for power status.
3 • LINK : LED indicator for link status. On when the connection of Transmitter and Receiver is established and detected • DP IN : DisplayPort signal input port. Connect this port to your DisplayPort source device by using a DisplayPort cable (not included) • DP OUT : DisplayPort signal output port.
4 • DC 5V : DC 5V power jack. Plug the included power adapter here • IR : Connect to the included IR receiver cable • RESET : Use the fine end of any object to press and hold the bottom to return to default settings • PWR : LED indicator for power status.
5 IR Extension Cables To control the source device from Receiver 's end: 1. Plug the IR blaster cable to the Transmitter 's IR connector, then plug the IR receiver cable to the Receiver 's IR connector.
6 4. Connect remote DisplayPort display (such as a LCD TV) to the receiver's DP OUT connector. output display Figure 5 5. Connect the IR blaster cable and IR receiver cable to the Transmitter and Receiver 's IR ports separately. Skip this step if not needed.
7 Figure 7 2 2 1 DP source local DP display remote DP display • The extension distance through CAT. X cable is up to 100 meters for one layer 10. Plug the included power adapters into the DC 5V power jack of the Transmitter and Receiver separately. Power on the connected source device and display(s), the Extender kit is ready for use.
8 2 1 CAT. X cable DisplayPort cable Advanced Connections Daisy Chain Connection Figure 8 • The extension distance through CAT. X cable is up to 100 meters for one layer DP Display DP Display Rx DP .
9 Cascade Connection DP source DP Display DP Display DP Display DP Display Rx Rx Rx Tx 1 1 1 2 2 2 Figure 9 2 • Cascade receivers up to 10 layers; extension distance through CAT.
10 Gigabit Ethernet Switch Connection Figure 10: Used with Gigabit Ethernet switch DP source DP Display DP Display Tx Rx 1 1 1 1 2 2 2 2 Rx Gigabit switch DP Display Rx 2 1 1 1 1 1 Rx Rx Rx Rx Rx Rx .
11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals.
An important point after buying a device Siig CE-DP0611-S1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siig CE-DP0611-S1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siig CE-DP0611-S1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siig CE-DP0611-S1 you will learn all the available features of the product, as well as information on its operation. The information that you get Siig CE-DP0611-S1 will certainly help you make a decision on the purchase.
If you already are a holder of Siig CE-DP0611-S1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siig CE-DP0611-S1.
However, one of the most important roles played by the user manual is to help in solving problems with Siig CE-DP0611-S1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siig CE-DP0611-S1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
