Instruction/ maintenance manual of the product 5.1 SIIG
Go to page of 20
1 SoundWave 5.1 PCI-LP Quick Installation Guide 04-0456B Introducing the SoundWave 5.1 PCI-LP The SoundWave 5.1 PCI-LP transforms your PC into a high-definition 5.1 channel surround sound home theater system. Key Features and Benefits • Compliant with AC'97 rev.
2 Package Contents • SoundWave 5.1 PCI-LP • G9 DIN cable • Spare standard height bracket • Software CD and Quick Installation Guide Layout Figure 1: Layout Aux-In CD-In Figure 2: G9 DIN Cable .
3 Audio Connectors MIC This connector provides microphone-in function. LINE In This connector provides analog line-in function. Optical Digital Out (Toslink) Optical Digital (S/PDIF) output via Toslink to Digital 5.1 surround sound speakers. CD-In (internal) This connector can be used to attach a CD-ROM or DVD-ROM audio cable (cable not included).
4 Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system.
5 Driver Installation Windows 2000 1. Boot up Windows, at the Add New Hardware Wizard , click Cancel , then insert the driver CD. 2. Click Start , Run , type D:32bitsetup.exe , then click OK . (Change D: to match the drive letter of your CD-ROM) 3. At the Welcome screen, click Next .
6 64-bit Windows XP/Server 2003 1. Boot up Windows, at the Found New Hardware Wizard , click Cancel , then insert the driver CD. 2. Click Start , Run , type D:64bitsetup.exe , then click OK . (Change D: to match the drive letter of your CD-ROM) 3. At the Welcome screen, click Next .
7 8. Click Install this driver software anyway , click Next . 9. At Installing Status, click Next . 10. Select Yes, I want to restart my computer now , click Finish .
8 Enable Windows Audio Systems that do not have a sound card previously installed may need to enable Windows Audio support after installing the SoundWave 5.1 PCI-LP . Windows XP/Server 2003 1. Click Start , Control Panel , Sounds and Audio Devices . 2.
9 Enable Digital CD Playback 1. Right click My Computer, click Manage , then click Device Manager . 2. Double-click DVD/CD-ROM drives , then double click your DVD or CD-ROM drive, then click the Properties tab. 3 . Check Enable digital CD Audio for this CD-ROM device , then click OK .
10 S/PDIF Control Playback Recording Information Advanced Controls Speaker Change Channel Sound Effects Close Stereo Link Mute Master Volume Control Control Panel • S/PDIF Control: Sets Digital outp.
11 • Change Channel: Displays the current channel mode. Click any button to access Channel Setup to change channel mode • Master Volume Control: Adjusts the system volume of the left and right cha.
12 Speaker Here you can set the volume for the various speakers. All speakers can be muted by clicking the check button above the speaker icon. Playback Here you can adjust the playback settings for various resources.
13 • CD Player: Sets the volume for analog output of the CD/DVD-ROM • MIC: Sets the volume for microphone playback • Line In: Sets the volume for analog playback of Line In sound (no playback th.
14 Sound Effects This panel is enable by selecting Immezio 3D Effect Enable in Advanced Controls (not supported in 64-bit Windows). • Equalizer: Set the volume of different frequencies independently.
15 • Speaker Test: Tests the position of your 2, 4 or 6 channel speaker system. Click on a speaker icon and you will hear a short note. Speaker test works with speakers connected into the G9 DIN audio connector only.
16 Blank Page.
17 Blank Page.
18 Blank Page.
19 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
SoundWave 5.1 PCI-LP is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
An important point after buying a device SIIG 5.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG 5.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG 5.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG 5.1 you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG 5.1 will certainly help you make a decision on the purchase.
If you already are a holder of SIIG 5.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG 5.1.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG 5.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG 5.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
