Instruction/ maintenance manual of the product 4110 SIIG
Go to page of 8
1 Single-Serial PC Card Quick Installation Guide 04-0254C Introducing the Single-Serial PC Card The Single-Serial PC Card adds one high-speed serial port (RS232) into your notebook computer to connect various types of serial devices.
2 Hardware Installation General instructions for installing the card are provided below. Since the design of notebook computers may vary, refer to your system’s reference manual for further information, if needed. 1. Power off your notebook computer and any other connected peripheral devices.
3 Driver Installation Windows 98/98SE 1. At the Add New Hardware Wizard , click Next . 2. Select Search for the best driver for your device (Recommended) , then click Next . 3. Insert the driver CD, check CD-ROM drives , uncheck the other boxes and click Next .
4 Windows XP/Server 2003 1. At the Found New Hardware Wizard , XP (w/SP1 or earlier)/Server 2003 : continue to step #2 XP (w/SP2 or later)/Server 2003 (w/ SP1 or later) : select No, not at this time , then click Next . 2. Choose Install from a list or specific location (Advanced) , then click Next .
5 Changing COM Port Address Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting. This option is only for Windows 2000/XP/Server 2003 respectively. 1. From the Device Manager window double click Ports (COM & LPT) , then double click PCMCIA RS232-550.
6 Blank Page.
7 Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our website at www.siig.com and click on Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
Single-Serial PC Card is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation.
An important point after buying a device SIIG 4110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG 4110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG 4110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG 4110 you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG 4110 will certainly help you make a decision on the purchase.
If you already are a holder of SIIG 4110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG 4110.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG 4110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG 4110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
