Instruction/ maintenance manual of the product 1S1P PCI SIIG
Go to page of 12
1 Cyber 1S1P PCI Quick Installation Guide 04-0344A Introducing the Cyber 1S1P PCI The Cyber 1S1P PCI high-speed serial I/O card provides one 9-pin serial port and one parallel port.
2 Package Contents • (1) Cyber 1S1P PCI board • (1) Driver CD • (1) Quick Installation Guide Layout Figure 1. Layout Jumper Settings (JP1) Open = 0 volts (default) Short 1-2 = 5v Short 2-3 = 12v Note: Most serial devices do not require additional power through the serial port.
3 Hardware Installation General instructions for installing the card are provided below, since the design of computer cases and motherboards vary. Refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system.
4 Software Installation This section provides information on how to install the Cyber 1S1P PCI drivers. Windows 95 Driver Installation 1. At the Update Device Driver Wizard window, click Next . 2. Insert the driver CD, and click Other Locations . Type in D:9x , click OK , then Finish .
5 Windows ME Driver Installation 1. At the Add New Hardware Wizard , choose Specify the location of the driver (Advanced), then click Next. 2. Check Specify a location , uncheck the other box, insert the driver CD, type in D:Me, then click Next. (Change D: to match your CD-ROM drive letter) 3.
6 7. Type in D:NT4Install_Parallel.exe, then click OK . (Change D: to match your CD-ROM drive letter) 8. Repeat steps 3-5 . 9. Click Yes to restart Windows to complete the installation. To Verify Successful Installation In Windows NT 4.0: 1. Go to Start / Settings / Control Panel , double click Ports device icon.
7 2. Insert the driver CD, check Include this location in the search , uncheck the other check box, type in D:XP , and click Next . (Change D: to match your CD-ROM drive letter) 3 . At the Hardware Installation window, click Continue Anyway , then Finish .
8 Changing COM Port Address Some serial devices need a specific COM port in order to work. If your serial device works properly, do not change this setting. Windows 95/98/98SE/ME 1. From the Device Manager window double click Ports (COM & LPT) , then double click CyberSerial PCI.
9 Changing Parallel Port Address (LPT) Some parallel devices need a specific parallel port in order to work. If your parallel device works properly, do not change this setting. Windows 95/98/98SE/ME 1. From the Device Manager window double click Ports (COM & LPT) , then double click CyberParallel PCI .
10 Blank Page.
11 Technical Support QUESTIONS? SIIG’s Online Support has the answers! Simply visit our Web site at www.siig.com and click on Support . Our online support database is updated daily with new drivers and solutions. The answers to your problems could be just a few clicks away.
Cyber 1S1P PCI is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Other names used in publication are for identification only and may be trademarks of their respective companies.
An important point after buying a device SIIG 1S1P PCI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG 1S1P PCI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG 1S1P PCI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG 1S1P PCI you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG 1S1P PCI will certainly help you make a decision on the purchase.
If you already are a holder of SIIG 1S1P PCI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG 1S1P PCI.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG 1S1P PCI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG 1S1P PCI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
