Instruction/ maintenance manual of the product 100 Pro SIIG
Go to page of 26
UltraA T A 133/100 Pro TM User ’ s Manual TM SIIG’ s ONLINE SUPPORT and Product Registration Visit SIIG’s web site at www.siig.com and click SUPPORT/DRIVERS for instant technical support.
Please complete and mail. This card will ensure that your warranty is properly documented in our database. Complete Product Name:________________________________________________________________ Name:_.
Comments: ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ______________.
PRODUCT NAME MODEL NUMBER UltraA T A 133/100 Pro CN2490 FCC RULES: TESTED T O COMPL Y WITH FCC P AR T 15, CLASS B OPERA TING ENVIRONMENT : FOR HOME OR OFFICE USE FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules.
User's Manual iv Contents Chapter 1: Introduction 1-1 Unpacking the UltraA T A 133/100 Pr o ......................... 1-1 1-1.1 Static Electricity Precaution .............................. 1-2 1-1.2 Record the Serial Number ......................
Contents v About This Manual The purpose of this manual is to introduce you to your UltraA T A 133/100 Pro . It will guide you on how to install the car d and software for pr oper operation in your computer . Please save this manual for future r eference in the event you wish to connect other devices to your system.
User's Manual vi.
Introduction 1-1 Thank you for your pur chase of the UltraA T A 133/100 Pro . SIIG’s goal is to provide its customers with r eliable, high quality products and customer support.
1-2 User's Manual 1-1.1 Static Electricity Precaution One of the r outine pr ecautions you must be aware of when working with computer components is the problem of static electricity discharge. Note Leave the pr oduct in its static-resistant bag until you are r eady to install it.
Introduction 1-3 1-2 Introducing the UltraA T A 133/100 Pro The UltraA T A 133/100 Pro is an ultra high-speed dual channel Ultra A T A/133 controller boar d for use with Power Macs. It achieves burst data transfer rates up to 133MB/sec and supports drive capacities gr eater than 137GB.
1-4 User's Manual 1 1 Figure 1-1. UltraA T A 133/100 Pro Board Layout Ultra A T A 133/100 Connectors 1-2.3 Board Layout IDE2 IDE1 Ultra A T A/133/100 Chipset.
Installation 2-1 Chapter 2 Installation This chapter will guide you through the installation of the UltraATA 133/100 Pro into your computer. 2-1 Hardware Installation General instructions for installing the card are provided below. If needed, please refer to your computer’s reference manual for more information.
User's Manual 2-2 Note: Hold the board by its external edges only. Try to avoid touching the components, connectors or pins. 2-2 Device Connection The UltraATA 133/100 Pro is a dual channel Ultra ATA/133 controller that supports up to four IDE hard disk drives or CD-R/ RW drive.
Installation 2-3 2. Attach one connector on the long end of the Ultra ATA ribbon cable to the board's IDE connector and the other connector(s) to your hard disk drive(s). Make sure pin 1 on the cable (indicated by the colored stripe) matches pin 1 on the board's IDE connector and your hard disk drive(s).
User's Manual 2-4 2-3 Software Installation This section provides information on how to install the UltraATA 133/100 Pro driver in your Power Mac. Please refer to the Mac OS manual to familiarize yourself with Drive Setup and OS Installation routines.
Installation 2-5 2-3.2 Driver Installation for Mac OS 9.x For a fresh OS 9.x installation: 1. Install the UltraATA 133/100 Pro and attached drives. 2. Boot up your computer with the Mac OS 9.x CD-ROM. Press and hold letter C on the keyboard while your system is booting to boot from CD-ROM.
User's Manual 2-6 2-3.3 Driver Installation for Mac OS X For a fresh OS X installation: 1. Install the UltraATA 133/100 Pro and attached drives. 2. Boot up your computer with the Mac OS X CD-ROM. Press and hold letter C on the keyboard while your system is booting to boot from CD-ROM.
Installation 2-7 2-4 Verifying Installation After you succesfully initialize the hard drive, new Untitled drive(s) icon will appear on the desktop. Please check Apple System Profiler for successful installation. 2-4.1 Verify Mac OS 8.6/9.x Installation 1.
User's Manual 2-8.
3-1 Technical Support & Product Return 3-1 Overview This chapter will give you instructions on how to obtain product information, contact technical support and return defective product. This user's manual is written with easy-to-understand instructions on how to configure and install this product in your system.
3-2 User's Manual 3-3 Technical Support QUESTIONS? SIIG’s Online Support has the answers! Simply visit our web site at www.siig.com and click on the SUPPORT link. Our online support database is updated daily with new drivers and solutions. The answers to your problems could be just a few clicks away.
3-3 Technical Support & Product Return Step 2: Complete the RMA form • Fill out your Return Merchandise Authorization (RMA) form, and include it in the package with the product. • Properly pack the product for shipping. All software, cable(s) and other accessories that came with the original package must be included .
3-4 User's Manual.
RETURN MERCHANDISE AUTHORIZA TION (RMA) FORM RMA Number: _____________________________________ Date:__________________________________ Name:____________________________________________________________.
02-0250E.
03-0311A.
An important point after buying a device SIIG 100 Pro (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG 100 Pro yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG 100 Pro - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG 100 Pro you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG 100 Pro will certainly help you make a decision on the purchase.
If you already are a holder of SIIG 100 Pro, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG 100 Pro.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG 100 Pro. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG 100 Pro along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
