Instruction/ maintenance manual of the product 04-0444A SIIG
Go to page of 8
1 Hi-Speed USB 5-Port PCI Quick Installation Guide 04-0444A Features and Benefits • Compliant with USB specifications revision 2.0 • Conforms to PCI specifications revision 2.2 • Supports simultaneous operation of multiple high-speed USB 2.0 and USB 1.
2 Package Contents • Hi-Speed USB 5-Port PCI • This quick installation guide Layout Figure 1. Board Layout * Note: This power connector (same as the one used with your floppy disk drive) is designed to provide additional power to the board when needed.
3 USB Pin-out Header The USB pin-out header consists of 4 pins and allows for 1 USB connection. Important: The internal USB port and the USB Pin-out Header can not be used at the same time. Do not connect devices to both ports at the same time. VCC/+ 5VDC DATA - DATA + GND Red Green White Black Figure 2.
4 4. Carefully align the card to the selected PCI slot, push the board down firmly, but gently, until it is well seated. 5. Replace the slot bracket's holding screw to secure the card. 6. Replace the computer cover and reconnect the power cord. Windows Driver Installation The Hi-Speed USB 5-Port PCI has three built-in USB hosts.
5 Mac OS Driver Installation Mac OS has built-in driver support for this controller. Just install the board and Mac OS will automatically detect and install the correct drivers for it. No additional driver is necessary. To Verify Mac OS Driver Installation Mac OS X (v10.
6 Blank Page.
7 Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our website at www.siig.com and click on Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
Hi-Speed USB 5-Port PCI is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Mac and Mac OS are registered trademarks of Apple Corporation. Pentium is a registered trademark of Intel Corporation.
An important point after buying a device SIIG 04-0444A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG 04-0444A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG 04-0444A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG 04-0444A you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG 04-0444A will certainly help you make a decision on the purchase.
If you already are a holder of SIIG 04-0444A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG 04-0444A.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG 04-0444A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG 04-0444A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
