Instruction/ maintenance manual of the product E-110-I Siemens
Go to page of 90
SIEMENS ADSL E-110/E-110-I ETH & USB ComboRouter User Manual Rev:0 1_0402 20 2004 -02-20 No par t of this publication ma y be re pro duced in an y f orm b y any me ans without the pr ior written p.
SIEMENS ADSL E-110_E-110-I user manual Safety Notes For Inst allation • Use only t he type of po wer sourc e indicated o n the ma rking lab els. • Use only the po wer adap ter supplied with the p roduct. • Do no t ov erload wall out let or extension c ables as this ma y incr ease the risk of electric s hock or fire.
Contents Content Safety N otes................................................................................................................... .............. i Safety N otes...........................................................................
SIEMENS ADSL E-110_E-110-I user manual Advanced Configu ratio n via We b browser .............................................................................. 33 Main Menu ..............................................................................
Contents Appendix: Spe c ific ation ................................................................................................................... 8 3 Softwa re .....................................................................................
.
Before You Use Before You Use The SIEMENS ADSL E-110/E- 110-I is an Asymmetric Di gi tal Subscriber Line (ADSL) Router . With the asymmetric tec hnology , t his de vice runs o ver stand ard co pper phone lines. In add ition, ADSL allo ws y ou t o hav e bo th voice and data services in use s imultaneously all o ver one phone line.
SIEMENS ADSL E-110_E-110-I user manual Configurat ion and Management • DSL Forum TR 37-comp liant aut o configuration • SNMPv1 o ver DSL o r Ethern et f or access t o the MIB-II (r outer only) •.
Chapter 1: O verview Chapter 1: Overview Ph ysi cal Out look Ph ysi cal Out look F ront Panel The f ollow ing illustration s hows t he fr ont panel of the ADSL Router : LED Indicators (Front Panel Sys.
SIEMENS ADSL E-110_E-110-I user manual Rear PanelRear Panel The f ollo wing figure illustrates t he re ar panel of y our A DSL Router . ADSL Connects the device to an ADSL telephone jack using the supp lied cable. USB Connects the device to the USB port o n your PC.
Chapter 2: Installation Chapter 2: Installation Choosing a place f or the ADSL R outer 1. Place the ADS L Router close t o ADSL w all outlet and pow er outlet f or the cable to reac h it easily . 2. A void placing the de vice in places wher e people may w alk on the cables.
SIEMENS ADSL E-110_E-110-I user manual ISDN inst all ation If your telephone service is ISDN (SIEMENS ADSL E-110-I) , proceed as f oll ows t o install your H ardw are : 1. Remo ve t he U-Line (incom ing line) f orm your ISDN NT and plug it int o the “LINE” plug of t he ISDN Splitter .
Chapter 2: Installation USB driver installation Install the USB driver Note: The USB driv er is only work ing on the f ollowing operating systems (O S): Windows 98, Windo ws 98SE, Windo ws ME, Windo w.
SIEMENS ADSL E-110_E-110-I user manual 7. Y ou will be asked whethe r the PC should be r estarted. Click on Close . The PC will be restarted and the f ollowing windo w appears: 8.
Chapter 3: Co nfigur ation Chapter 3: Configuration In order to access the Internet t hro ugh the r outer , y ou must c heck t he T CP/IP settings bef ore configuring the ro uter .
SIEMENS ADSL E-110_E-110-I user manual 2. Doub le-click the Network icon. 3. The Netwo rk windo w appears. On t he Configuration tab, chec k out the list of installed netw ork components. Option 1 : If you hav e no TC P / I P p r o t o c o l , c l i c k [Add] .
Chapter 3: Co nfigur ation 5. On the left side of the windo ws, hig hlight Microsoft and then se lect TCP/I P on th e righ t side . Then click [OK] . 6. When returning to Netw ork windo w , highlight TCP /I P pro tocol f or your NIC and clic k [Properties] .
SIEMENS ADSL E-110_E-110-I user manual 8. When returning to Netw ork windo w , click [OK] . 9. Windows ma y ask yo u f or the original Windo ws installatio n disk or additional files. Insert the Windows 95 installation C D-ROM and click [OK] . 10. Supply the r equested files by point ing to the corr ect location, e.
Chapter 3: Co nfigur ation For Windo ws 98 and Windo ws 98 SE Note: Windows 98 an d 98 SE u sers n eed the Windows 98 / Windows 98 SE installation CD-ROM to complete t he installation! 1. Click on the St ar t menu , point to Settings and click o n Control Panel .
SIEMENS ADSL E-110_E-110-I user manual 3. The Netwo rk windo w appears. On t he Configuration tab, chec k out the list of installed netw ork components. Option 1 : If you hav e no TC P / I P p r o t o c o l , c l i c k [Add] . Option 2 : If you ha ve T CP/IP pro tocol, go t o Step 6.
Chapter 3: Co nfigur ation 6. When returning to Netw ork windo w , highlight TCP /I P pro tocol f or your NIC and clic k [Properties] . 7. On IP Addres s tab, select Obtain an IP address automat ically . Then click [OK] . 8. When returning to Netw ork windo w , click [OK] .
SIEMENS ADSL E-110_E-110-I user manual 9. Windows ma y ask yo u f or the original Windo ws installatio n disk or additional files. Insert the Windows 95 installation C D-ROM and click [OK] . 10. Supply the r equested files by point ing to the corr ect location, e.
Chapter 3: Co nfigur ation For Windows ME 1. Click on the St ar t menu , point to Settings and click o n Control Panel . 2. Doub le-click the Network icon. 3. The Netwo rk windo w appears. On t he Configuration tab, chec k out the list of installed netw ork components.
SIEMENS ADSL E-110_E-110-I user manual For Windows NT Note: Windows NT users need the Window s NT installation CD-ROM to com plete t he installation! 1. Click St a r t , point to Settin gs and t hen click Control Panel . 2. Doub le-click the Network icon.
Chapter 3: Co nfigur ation 4. Highlig ht TCP/IP Protocol and click [OK] . 5. Click [Yes] to u se D H CP . 6. Insert the Windows NT C D int o yo ur CD-ROM driv e and ty pe the locat ion of the C D. Then click [Continue] . 7. Returning t o the Net work windo w , you will find t he T CP/IP Prot ocol among the list.
SIEMENS ADSL E-110_E-110-I user manual 9. Right click on t he Network Neighborhood icon on the des ktop and sel ect Proper t ies . 10. In the Protocol tab select T CP/IP Protocol and click on [Properties] . 11. Select Obtain an IP address from a DHCP server .
Chapter 3: Co nfigur ation 13. When returning to Network wind ow , click [OK] . Rev:0 1_0402 20 2 1.
SIEMENS ADSL E-110_E-110-I user manual For Windo ws 2000 1. F ro m the S tart menu, point t o Settings and then c lick Network and Dial-up Connections . 2. Right-clic k the Local Area Connection icon and then click Properties . 3. On the General tab, check out the list of installed net work com ponents.
Chapter 3: Co nfigur ation 4. Highlig ht Protocol and then c lick [Add] . 5. Click Internet Protocol(TCP/IP) and then c lick [OK] . 6. When ret urning t o Local Ar ea Co nnection Pr operties window , highlight Internet Prot ocol (TCP/IP) and then clic k [Properties] .
SIEMENS ADSL E-110_E-110-I user manual 7. Under t he General tab, select Obtain an IP address automatically . Then click [OK] . 8. When promp ted to restart your computer , rebo ot it t o enable the settin gs.
Chapter 3: Co nfigur ation For Windows XP 1. F ro m the St ar t menu, point t o Control Panel and the n click Network and Internet Connections . 2. Cl ick Network Connection and then clic k Propert ies . 3. On the General tab, c heck out t he list of installed net work com ponents.
SIEMENS ADSL E-110_E-110-I user manual For Macintosh OS 8.6 a nd 9.x 1. F ro m the Apple Men u , point to Co ntrol Panels and the n click TCP/IP . 2. F r om the Connect via pull-do wn menu se lect Ethernet built-in . F rom the Configure pull-down menu select Using DHCP Ser ver .
Chapter 3: Co nfigur ation For Macintosh OS 10.x 1. F ro m the Apple Men u , select System Preferences… 2. Cl ick on Network . 3. F ro m the Show pull-do wn menu select Built-in-Ethernet . On the T CP/IP tab, select Using DHCP from the Configure pull-down menu.
SIEMENS ADSL E-110_E-110-I user manual 4. On the PPP oE tab, and make sur e that t he Connect using PPPoE check box is NO T act iva te d. Click A pply Now .
Chapter 3: Co nfigur ation Renew IP A d dress on Client PC There is a c hance that y our PC does no t re new its IP add ress after the ADSL Router is on line an d the PC canno t access t he Internet. Please f ollow the pr ocedur es belo w t o rene w PC’s IP address.
SIEMENS ADSL E-110_E-110-I user manual For Windows ME 1. Select Run from the St ar t menu. 2. T ype winipcfg in t he dialog bo x and the click [OK] . 3. When the figu re be low ap pears, click [Release] and t hen [Renew] t o get an IP addr ess. For Windows NT 1.
Chapter 3: Co nfigur ation For Windo ws 2000 1. F ro m the St ar t menu, point t o Programs > Accessories and t hen click Command P rompt . 2. T ype ipconfig at pr omp t.
SIEMENS ADSL E-110_E-110-I user manual St ep 2: Quick Configu ration via Web browser Y our ADSL Route r includes a Web-base d Configuration Manager , which e nables y ou to configure the device settings t o m eet the needs of y our network.
Chapter 3: Co nfigur ation Advanced Configuration via Web browser Note: Please f ollow caref ully the instructions in the who le chap ter in or der t o be sure that yo ur PC and your ADSL Route r are work ing pr operly . For advance d configuration click t o Advanced Configuration .
SIEMENS ADSL E-110_E-110-I user manual Main Menu Configuration Manager tasks ar e gr oupe d inf o categories which can be accessed by c licking t he main menu on the left. Each menu disp lays the a vailable tasks in sub-menus. The spec ific configuratio n opt ions are dis play ed by clicking on these menus .
Chapter 3: Co nfigur ation Viewing Basic System Information The System View page displa ys when y ou first access the prog ram. The System View table pr ovides a snapsho t of your system configurat ion.
SIEMENS ADSL E-110_E-110-I user manual Quick Configuration The Quick Configur ation displa ys the settings y ou ar e most likely to nee d to c hange when y ou first set up your A DSL Router . W ork with your ISP to determine the values or settings yo u need t o change.
Chapter 3: Co nfigur ation Fie ld Description Use DNS Enable Primary DNS Server / Secondary DNS Server Enter the Primar y and Seco ndary DNS s erver address es provided by yo ur ISP Commit ting Change.
SIEMENS ADSL E-110_E-110-I user manual Sub-Menus For advance d mode, the f ollowing sub-menus ar e av ailable : Lan LAN Config Sets LAN configur ation, whic h determine s you the device is def ined in the network. DHCP Mode Sets and configures the Dynamic Ho st Configuration Protocol mode for the device.
Chapter 3: Co nfigur ation PPP Configures and displays Point to Point Protocol (PPP) interfaces. T he PPP protocol is commonly u sed be tween ISP s and thei r custom ers to id entify and con trol vari ous commu nica tion p roper tie s. EOA Configures an d displays RFC1483/Ethe rnet over A TM (EoA) interf aces.
SIEMENS ADSL E-110_E-110-I user manual Chapter 4: Advanced Configuration Configuring IP Rou tes Most us ers do no t nee d t o defi ne IP r out es. Y ou may need t o def ine r outes if: • Y our network setup includes two or more networks or subnets. • Y ou connect to two or more ISP servi ces.
Chapter 4: Advance d Config uration DHCP Configuration Y ou ca n conf igur e yo ur net wo rk an d ADS L Rout er t o us e the Dy nami c Host Config uratio n Pr o t ocol (DHCP) . The device c an be configured as a DHCP server , DHCP rela y agent, or , in some cases, a DHCP client.
SIEMENS ADSL E-110_E-110-I user manual 2. T o add an IP addr ess pool, click [Add] . The DHCP Ser ver Pool - Add page displays. Fie ld Description Start / End IP Addresses Specify the lowest and highest addresses in the pool.
Chapter 4: Advance d Config uration Par t 3. Configuring your PCs as DHCP clients For eac h computer that y ou want t o configur e t o rec e ive IP inf ormation auto matically , configure the T CP/IP properties to Obtain an IP address automat ically (the actual text may vary depending on yo ur operating system).
SIEMENS ADSL E-110_E-110-I user manual Configuring DH CP Rela y Par t 1. Defining the DHCP relay interface(s) 1. Select Lan > DHCP Rela y . The D HCP Rela y Configuration page displ ays.
Chapter 4: Advance d Config uration NA T Configuration This section pr o vides an o ver view of Netw ork Addr ess T ranslation (NA T) and instructions f or modifying the default config uration o n your device.
SIEMENS ADSL E-110_E-110-I user manual The NA T Global Information table contains the f oll owing fields: Fie ld Description TCP I dle Tim eout( sec) For a NAT tr ansl ati on ses sion on data that u ses th e TCP pr otoco l, th e translation will no lo nger be performed if no matching data packet s are received after the specified time ha s elapsed.
Chapter 4: Advance d Config uration On the NA T Configuration page you can cl ick [Global Stats] to view accumula ted da ta on how many NA T rules hav e been in voke d and ho w much data has been translate d. A page similar t o the one below displays.
SIEMENS ADSL E-110_E-110-I user manual Viewing NA T Rules and Rule Statistics T o vi ew the N A T Rules currently defined on your s ystem, select Ser vices > NA T . Fr om the NA T Options dro p-do wn list select NA T Rul e En tr y . The NA T Rule Configuration page displays.
Chapter 4: Advance d Config uration Fie ld Description ALG Type The Applicati on Level G ateway (ALG), if any, that was used to enable this NA T translation (A LGs are special s ettings that cert ain applic ations req uire in ord er to work while NAT is e nabled).
SIEMENS ADSL E-110_E-110-I user manual 2. Define the r ule ID and selec t the interface. 3. In the Local Address F rom/T o fi elds , type th e sta r tin g and en ding IP addresse s, respe ctivel y , of the range of priva te addr ess yo u want t o be tr anslated.
Chapter 4: Advance d Config uration 7. If the publicly accessible L AN computer us es a non-standar d port number for the type of traffic it receiv es, type the no n-standard port number in the Local Por t field. 8. Complete as desc ribed f or general proced ure (steps 6 to 10) .
SIEMENS ADSL E-110_E-110-I user manual 1. On the NA T Rule - Ad d page, sel ect FIL TER from the Rul e Fl avor drop-do wn list. 2. Define the r ule ID and selec t the interface. 3. F ro m the Protocol drop-do wn list, select a pro t ocol to which this rule app lies, or choose AN Y if the rule applies t o all data.
Chapter 4: Advance d Config uration Bimap rules can be used t o prov ide external ac cess to a L AN device. They do not pro vide the same le vel of security as r dr rules, bec ause rd r rules also rer oute inco ming packets based on the port ID.
SIEMENS ADSL E-110_E-110-I user manual RIP Configuration Y our ADSL Router can be configur ed t o communicate with o ther rout ing de vices t o determine t he best path f or sendi ng data to its int ended destinat ion.
Chapter 4: Advance d Config uration 6. Click [Add] . The new R IP entry will display in t he table. 7. Click the Enable radio button t o enable the RIP feat ure. 8. When you a re finished defining RIP inter fa ces, cli ck [Apply] . A pa ge gives a receipt f or the chang es.
SIEMENS ADSL E-110_E-110-I user manual Fir ewal l, IP Fil te r s a nd B lo cke d Pr ot oc ol s Fire wall Configurati on Configuration M anager pr o vides b uilt-in fir ewal l functions, enab ling y ou t o pr otec t the system ag ainst denial of service (DoS) attacks and o ther types of mali cious accesses t o your L AN.
Chapter 4: Advance d Config uration Fie ld Description Max Half open T CP Conn. Sets the percent age of concurrent IP ses sions that can be in the half-open state.
SIEMENS ADSL E-110_E-110-I user manual IP Filter Configuration The IP filter featur e enables you t o create rules that co ntro l the f or warding of inco ming and outg oing data betwee n your L AN and the Intern et. This c hapter explains ho w to cre ate IP filter rules.
Chapter 4: Advance d Config uration Creating IP Filter Rules 1. On the IP Filter C onfiguration page clic k [Add] . The IP Filter Rule - Add page displays. 2. Enter or selec t data f or eac h field that applies t o yo ur rule: Fie ld Description Rule ID Rules are processed from lowest to highest on each data packet, unt il a match is found.
SIEMENS ADSL E-110_E-110-I user manual Fie ld Description Log Option When Enabled i s selected, a l og entry will be created on the system each time this rul e is i nvo ked . Security Level The security level that mus t be enab led globally f or this rule to t ake affect.
Chapter 4: Advance d Config uration Fie ld Description Dest Port Port number criteria for the d estination comp uter(s) (i.e., the port number of the type of computer to which the packet is being sent). This field will be dimmed (unav ailable for e ntry) unless you have selected TCP o r UDP as the protocol.
SIEMENS ADSL E-110_E-110-I user manual IP filter rule exam ples Example 1 . Blocking a specific com puter on your LAN from using acc essing Web s er vers on t he Internet: 1. Add a ne w rule for outgo ing packets o n the ppp-0 interface from an y incoming inter face (this w ould include the et h-0, f or example).
Chapter 4: Advance d Config uration The figur e belo w sho ws ho w this rule could be configur ed: Vie win g IP F ilter S tatist ics 1. Select Ser vices > IP Filter .
SIEMENS ADSL E-110_E-110-I user manual Managing Current IP Filter Sessions 1. Select Ser vices > IP Filter . The IP F ilter Configuration page displays. 2. T o view all cur rent IP sessions, c lick [Session] . The IP Filters Session page displa ys .
Chapter 4: Advance d Config uration A dmi nist rat ion T asks Changing the System Date and Time The device keeps a r ecor d of the curr ent date and time, which it use s to calculate and report various per f ormance data. 1. Select Home . The System View page displa ys.
SIEMENS ADSL E-110_E-110-I user manual Adding a New User 1. Select Admin > User Config . The User Configuration page displays. 2. Click [Add]. The User Config - Add page displ ays. 3. Enter a new username in the User ID text bo x. It can be up to 1 28 char acters and is c ase-sensitive.
Chapter 4: Advance d Config uration Vi e w Sy ste m A la rms 1. T o display the Alarm page, select Admin > Alarm . Each r o w in the table d ispla ys the t ime and d ate that a n alarm occur red, t he type of alarm, and a brief statem ent indica ting i ts cause.
SIEMENS ADSL E-110_E-110-I user manual Por t Settings The r outer ’s HTTP service (Web Configuratio n Utility), Telnet service and FTP ser vice are accessible us ing the standard port number 80, 23 and 21 r espective ly .
Chapter 4: Advance d Config uration Vie w DS L P ar am e te rs 1. T o view configuration p arameters and p erformance statistics f or the ADSL Router ’s DSL line, select WA N > DSL S tat u s. The DSL Status page di splays. The DSL Status page displa ys curr ent inf ormation on the DSL line performance.
SIEMENS ADSL E-110_E-110-I user manual 3. F ro m the DSL Stat us page , you ca n click [Stats] to dis pla y DSL line perf ormance statistics: The DSL Statistics page rep orts error d ata relating t o the last 15 minute interval, the current da y , and the previou s day .
Chapter 5: Co nnection Mode Chapter 5: Connection Modes The ADSL Router is delive re d pre -configure d fr om the fact or y in Router Mo de. This c hapter pres ents some deplo yment ex amples f or your refer ence. Each mod e includes its general config ure pr ocedur es.
SIEMENS ADSL E-110_E-110-I user manual 3. Enter the pr o vided fields as below . Fie ld Description VC Interface Select a VCC interface from the available interf aces, e.g. aal5-1 . VPI / VCI Enter the VPI/VCI values given by your ISP, e.g. 0 / 33 . Mux Type Select LLC or VC as require d by your ISP.
Chapter 5: Co nnection Mode 5. When confirmation page appears, clic k [Close] . 6. Y ou will retur n to the AT M ( E o A ) C o n f i g page and see the ne wly added EoA entry . 3. Enable Bridging function. 1. Select Bridge > Bridging to disp lay the Bridge C onfiguration page.
SIEMENS ADSL E-110_E-110-I user manual 5. Commit your c hanges. Select Admin > Commit & Reboo t and click [Sa ve] to sav e y ou r ch a n ge s to pe r m an e n t sto r a ge .
Chapter 5: Co nnection Mode 3. Enter the pr ovided fields a s belo w: Fie ld Description VC Interface Select a VCC interface from the available interf aces, e.g. aal5-0 . VPI / VCI Enter the VPI/VCI values given by your ISP, e.g. 0 / 35 . Mux Type For PPPoE select LLC , for PPPoA select VC .
SIEMENS ADSL E-110_E-110-I user manual Fie ld Descr iption Status Select Start or Start OnData . Start - To est ablish connection whenever yo u turn on the A DSL Router. StartOnData - To establish connection wh enever th e device gets request to connect to the Internet, such as when you open browser requesting for Web pages.
Chapter 5: Co nnection Mode Router Connection Mode In this deployment enviro nment, we make up a private IP ne twork of 192.168.1.1. NA T function is enabled (on ADSL Router or use ano ther NA T box connected t o hub) to sup port multiple clients t o access t he Router and some public server s (WWW , FTP).
SIEMENS ADSL E-110_E-110-I user manual 2. Creating a IPoA inter face. 1. Select Wa n > IPOA . 2. On the IOoA Configuration page click [Add] to add a ne w IPoA int erface. 3. Enter the pr ovided fields a s belo w: Fie ld Description IPoA Interfa ce Select an IPoA interf ace from the avai lable interf aces, e.
Chapter 6: Troubleshooting Chapter 6: Troubleshooting This appendix suggests so lutions f or problems yo u ma y encounter in installing or using y our A DSL Router , and pr ovid es instructions f or using sev eral IP ut ilities t o diagnose pr oblems.
SIEMENS ADSL E-110_E-110-I user manual Problem T roubleshooting Suggestion Can not acce ss the C onf igu rat io n Manager progr am from your browser. Use the ping utility to c heck whether yo ur PC can co mmunicate with the ADSL Router’s LAN IP address (by default 192.
Chapter 7: G lossary Chapter 7: Glossary • ARP (Address Resolution Protocol ) ARP is a T CP/IP pro tocol f or mapping an IP addr ess t o a ph ysical machine add ress t hat is r ecognized in the local netwo rk, such as an Ethernet addr ess. A host wishing t o obtain a p hysical addr ess br oadcasts an ARP r equest ont o the T CP/IP network .
SIEMENS ADSL E-110_E-110-I user manual • PVC (Permanent Vir tual Circuit) A PVC is a logical point- to-point circui t between customer si tes. PVCs are low-delay circuits beca use ro uting decis ions do not ne ed to be mad e along the w ay . Permanent means that the cir cuit is prepr og rammed b y the carr ier as a path thr ough the netwo rk.
Appe ndix : Spec if icat ion Appendix: Specificat ion Software ADSL C omp lian ce • ANSI T1.413 Issue 2 • ITU G.992.2 Annex A (G.lite) • ITU G.992.1 Annex A (G.dmt) • ITU G.992.1 Annex B (G.dmt) • ITU G.994.1 (G.hs) AT M F e a t u r e s • Compliant to A TM Forum UNI 3.
SIEMENS ADSL E-110_E-110-I user manual 84 Rev:01_040220 Hardware Inter face • One RJ-11 port f or ADSL connection • One RJ-45 port for 10/100 Base-T auto -sensing Ethernet connection • One hidde.
An important point after buying a device Siemens E-110-I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siemens E-110-I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siemens E-110-I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siemens E-110-I you will learn all the available features of the product, as well as information on its operation. The information that you get Siemens E-110-I will certainly help you make a decision on the purchase.
If you already are a holder of Siemens E-110-I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siemens E-110-I.
However, one of the most important roles played by the user manual is to help in solving problems with Siemens E-110-I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siemens E-110-I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
