Instruction/ maintenance manual of the product ANIM-03114 Siemens
Go to page of 16
ANIM-03114 (03/02) (Supersedes all pre vious issues) ©2002 Siemens Energy & Automation, Inc. All rights reser ved. Storage Recommendations Induction Motors/ Generators.
- 1 - Table of Contents Page Safety Procedures………………… …………………………… 2 Introduction………………………… …………………………… 3 Indoor Storage (Up to 5 Years) Wholly Controlled Atmosphere……………………………….
- 2 - Safety Procedures This equipment contains haza rdous voltages. Death, serious personal inju ry or property damage can resu lt if safety instructions are not followed.
- 3 - Introduction The purpose of this booklet is to offer some short, easy to follow recommendations to our customers, users and distributors for the care of electri c motors in storage. For prac tical purposes , such equipm ent is conside red to be in storage not only when it is in the storeroom but also when; 1.
- 4 - Indoor Storage (Up to 5 Years) NOTE Rodents and other animals in search of warm surroundings or food, like to house insid e motors. Some of them attack the insulation ma terials. Their access to the motor should be prevented. Wholly Controlled Atmosphere Requirements Uniform temperature between 40°F (4.
- 5 - Outdoor Storage (Up to 5 Years) NOTE Rodents and other animals in search of warm surroundings or food, like to house insid e motors. Some of them attack the insulation ma terials. Their access to the motor should be prevented. Inland Dry Climate Conditions Usually Encountered Dust, sand, heat from the sun, and occasional rain o r snow.
- 6 - Outdoor Storage (Up to 5 Years) NOTE Rodents and other animals in search of warm surroundings or food, like to house insid e motors. Some of them attack the insulation ma terials.
- 7 - Outdoor Storage (Up to 5 Years) NOTE Rodents and other animals in search of warm surroundings or food, like to house insid e motors. Some of them attack the insulation ma terials.
- 8 - Preparation For Storage CAUTION Moisture. Can damage windings. Protect motor from moisture. Sleeve and Tilting Pad Bearings Motors with this type of bearing are shipped without lubri cati ng oil.
- 9 - Preparation For Storage Shaft Extensions and Exposed Ma chined Surfaces Surfaces should be coated with an easil y remov able rust preventive such as Tectyl No. 502-C. If the storage period will be nine months or longer and the risk of exposure to moisture is present, take the following pr ecautions; 1.
- 10 - Maintenance During Storage DANGER Hazardous voltage. Can cause death, severe injury, or property damage. Follow all safety rules. Sleeve Bearings Per Chart 1, the motor shaft should b e manuall.
- 11 - Maintenance During Storage Oil Mist Lubricated Anti-F riction Bearings If motor was shipped with grease in the bearing, follow in structions for grease lubricated anti-friction b earings described above.
- 12 - Preparation For Service Cleaning Both the interior and exterior of the m otor should be free of spilled oil, water, dust, and dirt. The exterior should be wiped a nd the interior b lown out with compressed air at a reduced pre ssure. CAUTION Moisture.
- 13 - Notes ___________________ ______________ ___________________ __________________ _______________ _____ ___________________ ______________ ___________________ __________________ _______________ _.
- 14 - Notes ___________________ ______________ ___________________ __________________ _______________ _____ ___________________ ______________ ___________________ __________________ _______________ _.
ANIM-03114 (03/02) (Supersedes all pre vious issues) ©2002 Siemens Energy & Automation, Inc. All rights reser ved. Siemens Energy & Automation Industrial Products Divisi on Norwood Motor Plan.
An important point after buying a device Siemens ANIM-03114 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siemens ANIM-03114 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siemens ANIM-03114 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siemens ANIM-03114 you will learn all the available features of the product, as well as information on its operation. The information that you get Siemens ANIM-03114 will certainly help you make a decision on the purchase.
If you already are a holder of Siemens ANIM-03114, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siemens ANIM-03114.
However, one of the most important roles played by the user manual is to help in solving problems with Siemens ANIM-03114. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siemens ANIM-03114 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
