Instruction/ maintenance manual of the product 9200 Siemens
Go to page of 5
© 2003 Siemens Energy & Automation. All rights reserved. The information in this document is believed to be accurate at the tim e of publication, however, Siemens Energy & Automa tion assumes no responsibility for errors which may appear here and reserves the right to make changes without notice .
Replacing the P ower Supply 9200 P ower Supply Retrofi t Instructions Page 2 Replacing the Power Supply D ANGER Installation and maintenance of ACCESS meter s and me ter opti ons sh ou ld only be performed by q uali fi ed personnel th at have approp riate tr aining and experience with high voltage/current devices.
9200 Power Supply Retrofit Inst ruc tions Wiring the P ower Supply Page 3 Wiring the Power Supply The meter requires a constant power su pply to maintain monitoring, analysis, control, and communications operations.
Wiring the 480V P ower Supply 9200 P ower Supply Retrofi t Instructions Page 4 Wiring the 480V Power Supply 480V Power Supply Connect one phase to the L1 terminal and the other phase to the L2 terminal. You can use the same wires f rom the grid th at the voltage inputs use (see diagram above).
9200 Power Supply Retrofit Inst ruc tions Specifications Page 5 Specifications Power Supply Rated Inputs Meter Maximum Steady State Dielectric Withstand VA W VA W Standard A C / DC P ower Supply AC: 100 – 24 0 VAC, 50 – 60 Hz DC: 110 – 300 VDC Installa tion categ ory II (Local).
An important point after buying a device Siemens 9200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siemens 9200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siemens 9200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siemens 9200 you will learn all the available features of the product, as well as information on its operation. The information that you get Siemens 9200 will certainly help you make a decision on the purchase.
If you already are a holder of Siemens 9200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siemens 9200.
However, one of the most important roles played by the user manual is to help in solving problems with Siemens 9200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siemens 9200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
