Instruction/ maintenance manual of the product 80844 Shindaiwa
Go to page of 16
SHINDAIW A OWNER’S/ OPERA TOR'S MANUAL DH2510 HEDGE TRIMMER WARNING! Minimize the risk of injury to yourself and others! Read this manual and familiarize yourself with the contents. Always wear eye and hearing protection when operating this unit.
2 WARNING! A statement preceded by the triangu- lar Attention Symbol and the word "WARNING" contains information that should be acted upon to prevent serious bodily injury. IMPORTANT! The operational procedures described in this manual are intended to help you get the most from your unit, and to protect you and others from harm.
3 DH251003 Work Safely Shindaiwa hedge trimmers operate at very high speeds and can do serious damage or injury if they are misused or abused. Never allow a person without training or instruction to operate your unit! WARNING! Use Good Judgment Stay Alert You must be physically and mentally fit to operate this unit safely.
4 Safety Equipment and Labels Cover ON-OFF Switch Throttle Interlock Protector Caution Label IMPORTANT! Caution, Danger, Warning, and Opera- tion Information Labels: Make sure all information labels are undamaged and readable. Immediately replace damaged or missing information labels.
5 Unit Description Using the accompanying illustrations as a guide, familiarize yourself with your unit and its various components. Understand- ing your unit helps ensure top perfor- mance, long service life, and safer opera- tion.
6 IMPORTANT! Mix only enough fuel for your immediate needs! If fuel must be stored longer than 30 days and oil with fuel stabilizer is not used, it should first be treated with a fuel stabilizer such as StaBil™. Filling the Fuel T ank 1. Place the trimmer on a flat, level surface.
7 Starting Procedure 2. Set the throttle trigger to the “fast idle” position by performing the following: a. Depress and hold the throttle lock, and then squeeze the throttle trigger. b. Depress and hold the “fast idle” button. c. While depressing the fast idle button, release the throttle lock and throttle trigger.
8 The engine must return to idle speed whenever the throttle lever is released. Idle speed is adjustable, and must be set low enough to permit the engine clutch to disengage the cutters. Adjusting Engine Idle Stopping the Engine Idle Adjust- ment Screw Ignition Switch Ignition OFF 1.
9 Maintenance and Adjustments IMPORTANT! Maintenance, replacement or repair of emission control devices and systems may be performed by any repair estab- lishment or individual; however, warranty repairs must be performed by a dealer or service center authorized by Shindaiwa Kogyo Co.
10 HT2510_20 1. Remove the cylinder cover, and clean any grass and debris from the cylinder fins. 2. Remove and inspect the spark plug. Replace any damaged or worn spark plug with a new NGK CMR5H or equivalent. Adjust spark plug gap to 0.024 inch (0.6mm) and reinstall.
11 Long T erm Storage Whenever the unit will not be used for 30 days or longer, use the following proce- dures to prepare it for storage: ■ Clean external parts thoroughly and apply a light coating of oil to all metal surfaces. ■ Drain all the fuel from the carburetor and the fuel tank.
12 ENGINE DOES NOT START T roubleshooting Guide ENGLISH ENGINE DOES NOT START OR HARD TO START 6 >«ÀV }iÊÌÉi>ÌÃ>i`° ÜÊvÕiʵÕ>.
13 T roubleshooting Guide (continued) LOW POWER OUTPUT ENGLISH ÃÊÌiÊi}iÊÛiÀi>Ì}¶ "«iÀ>ÌÀÊÃÊÛiÀ ÜÀ}ÊÌiÊÕÌ° .
14 T roubleshooting Guide (continued) ADDITIONAL PROBLEMS ENGLISH *ÀÊ>VViiÀ>Ì° }}i`Ê>ÀÊVi>iÀÊiiiÌ° }}i`ÊvÕiÊv.
15 Owners Warranty Responsibilities As the small off-road engine owner, you are responsible for the performance of the required maintenance listed in this owners manual. Shindaiwa Kogyo Co., Ltd. recommends that you retain all receipts covering maintenance on your small off- road engine, but Shindaiwa Kogyo Co.
姞 Shindaiwa Inc. 11975 S.W. Herman Rd. Tualatin, Oregon 97062 Telephone: 503 692-3070 Fax: 503 692-6696 www.shindaiwa.com NOTES: Shindaiwa Kogyo Co., Ltd. Head Office: 6-2-11 Ozuka Nishi, Asaminami-ku Hiroshima, 731-3167, Japan Telephone: 81-82-849-2220 Fax: 81-82-849-2481 䊚 2004 Shindaiwa, Inc.
An important point after buying a device Shindaiwa 80844 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shindaiwa 80844 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shindaiwa 80844 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shindaiwa 80844 you will learn all the available features of the product, as well as information on its operation. The information that you get Shindaiwa 80844 will certainly help you make a decision on the purchase.
If you already are a holder of Shindaiwa 80844, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shindaiwa 80844.
However, one of the most important roles played by the user manual is to help in solving problems with Shindaiwa 80844. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shindaiwa 80844 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
