Instruction/ maintenance manual of the product 62640-94313 Shindaiwa
Go to page of 20
WARNING! Always wear eye and ear protection when ope rat ing th is mac hin e! To min imi ze the ri sk of injury to yourself and others, read this manual and familiarize yourself with its contents. SHIND AIWA OWNER’S/OPERA T OR’S MANU AL AH2510 AR TICULA TED HEDGE TRIMMER Par t Number 62640-94313 Rev .
2 Throughout this manual are special atten- tion statements. D ANGER! A statement preceded by the triangular attention symbol and the word “DAN- GER” indicates an imminently hazard- ous situation .
3 WARNING! n Never transport the articulated hedge trimmer nor set it down with the engine running. An engine that’s running could be accidently acceler- ated causing the blades to oscillate. n Make sure the cover is in place when transporting the articulated hedge trimmer.
4 CA UTION! n Always maintain the articulated hedge trimmer according to this owner’s manual and follow the recommended scheduled mainte- nance. n Never modify or disable any of the hedge trimmer’s safety de- vices. n Always use genuine Shindaiwa parts and accessories when repairing or maintaining this ma- chine.
5 Prior T o Assembl y Using Figure 4 as a guide, familiarize your- self with the Shindaiwa AH2510 ar ticulated hedge trimmer and its various compo- nents. Understanding your machine helps ensure top per formance, longer ser vice life, and safer operation.
6 Assembly: AH2510 Grip Spark Plug Trigger Housing Mainshaft Tube Clamp Outer Tube 1. Place the power head on a clean, flat sur face, spark plug facing up. 2. Use the 4 mm hex wrench to loosen the tube clamp screw . Tube Clamp Hex Wrench Connect the Outer Tube to the Powerhead.
7 Adjusting the Hedge T rimmer Cutter Assembl y WARNING! n The cutter blades are very sharp. Do not grasp the blades with your hands. Do not brush the blades against your body. n Never run the engine nor operate the articulated hedge trimmer when the cutter assembly is in the stor- age/transport position.
8 WARNING! Never run the engine when adjusting the cutter assembly to the storage position. Figure 17 Gearcase rotated to the storage/transportation position Adjusting the Cutter Assembly for Storage .
9 WARNING! When the engine starts or is running– even at idle–the hedge trimmer cutter blade may move (oscillate). Keep your hands and your body away from the cutter assembly while starting the engine! Starting A Flooded Engine 1.
10 Idle the engine briefly before stopping (about 2 minutes), then slide the ignition switch to the “O” (Engine OFF ) position. Stopping the Engine Adjusting Engine Idle Figure 23 Figure 24 OFF The engine must retur n to idle speed whenever the throttle lever is released.
11 IMPORT ANT! MAINTENANCE, REPLACEMENT, OR REPAIR OF EMISSION CONTROL DEVICES AND SYSTEM MAY BE PER- FORMED BY ANY REPAIR ESTABLISH- MENT OR INDIVIDUAL.
12 251030 10/15-Hour Maintenance CA UTION! Before removing the spark plug, clean the area around the plug to prevent dirt and dust from getting into the engine’s internal parts. Every 10 to 15 hours of operation: n Remove and clean the spark plug. See Figure 19.
13 Servicing the fuel lter CA UTION! Make sure you do not pierce the fuel line with the end of the hooked wire. The line is delicate and can be dam- aged easily.
14 Long T er m Stora ge Whenever the machine will not be used for 30 days or longer , use the following procedures to pr epare it for storage: n Clean exter nal par ts thor oughly and apply a light coating of oil to all metal sur faces.
15 NO T r oubleshooting Guide Does the engine crank? Good compression? Does the tank contain fresh fuel of the proper grade? Is fuel visible and moving in the retur n line when priming? Is there spark at the spark plug wire ter minal? Check the spark plug.
16 T r oubleshooting Guide (continued) ADDITIONAL PR OBLEMS Poor acceleration. Clogged air filter . Clogged fuel filter . Lean fuel/air mixture. Idle speed set too low . Switch tur ned of f. Fuel tank empty . Clogged fuel filter . W ater in the fuel.
17 Shindaiwa Corporation war rants to the initial purchaser and each subsequent owner, that this utility equipment engine (herein engine) is designed, built and equipped to confor m at the time of initial sale, to all applicable regulations of the U.S.
18 NOTES.
19 NOTES.
Shindaiwa Inc. 11975 S.W . Herman Rd. T ualatin, Oregon 97062 USA Telephone: 503 692-3070 Fax: 503 692-6696 www .shindaiwa.com Shindaiwa Corporation Head Of fice: 6-2-11, Ozuka-Nishi Asaminami-Ku, Hiroshima 731-3167, Japan Telephone: 81-82-849-2220 Fax: 81-82-849-2481 ©2007 Shindaiwa, Inc.
An important point after buying a device Shindaiwa 62640-94313 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shindaiwa 62640-94313 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shindaiwa 62640-94313 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shindaiwa 62640-94313 you will learn all the available features of the product, as well as information on its operation. The information that you get Shindaiwa 62640-94313 will certainly help you make a decision on the purchase.
If you already are a holder of Shindaiwa 62640-94313, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shindaiwa 62640-94313.
However, one of the most important roles played by the user manual is to help in solving problems with Shindaiwa 62640-94313. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shindaiwa 62640-94313 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
