Instruction/ maintenance manual of the product CD Stereo Sharper Image
Go to page of 15
Slim 3 -CD Stereo Instructions / W arranty SA 248.
SA248 Instructions Slim 3-CD Stereo FCC Information For CD player section. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1 ) This device m.
Do not use in areas where extremes in temperature occur (below 40°F/5°C or exceeding 95°F/35°C ), or where unit may be exposed to direct sunlight. Because of the CD player’ s extremely low noise and wide dynamic range, there is a tendency to turn the volume on the amplifier higher than necessary .
Location of Stereo Controls 1. Moodlight 2 . CD player 1 3. CD player 2 4. CD door 5 . CD player 3 SA248.
6 . MEMOR Y/PROGRAM — programs AM/FM stations and CD tracks 7 . STEREO/MONO — selects mono or stereo for FM stations 8 . PRESET — accesses preset radio stations 9. CLOCK SET — sets clock 10 . DYNAMIC BASS — turns BassXpander on and off 11 . SURROUND — turns surround sound on and off 12 .
19 . REPEA T — repeats one CD track, one CD or all CDs 20 . TUNER BAND — selects AM or FM 21 . BACKLIGHT — turns LCD backlight on and off 22 . SUREW AKE — turns SureW ake on and off 23 . STOP — stops CD play 24 . PLA Y/P AUSE — begins or pauses CD play 25 .
38. Carrying recess 39 . Slot for wall-mounting bracket — connects to mounting bracket to mount unit on wall 40 . FM antenna terminal — terminals for connecting single antenna ( 75 Ω ) or dipole antenna ( 300 Ω ) 41 . Stand — opens to support main unit for desktop use 42 .
Remote Control Functions 1 . POWER/ST ANDBY —- turns power on or off (standby mode) 2 . NUMBERS — selects AM/FM preset stations or CD tracks 3 . INTRO — plays first 10 seconds of each track 4. REPEA T — repeats one CD track, one CD or all CDs 5.
23 . REMAIN/MODE — changes display from elapsed CD track time to remaining track time or entire CD time (in CD mode), clock, or AM/FM station (in T uner mode) 24 . SLEEP — selects auto shutoff sleep mode ( 120 min., 90 min., 60 min., 30 min.) 25 .
Setting Clock 1 . Open CD doors by pressing CD DOOR OPEN/CLOSE. 2 . Press CLOCK SET once. Hour number will flash. 3 . Use CD-TUNER-SKIP buttons to select the desired hour . 4 . Press CLOCK SET again. Minutes number will flash. 5 . Use CD-TUNER-SKIP buttons to select the desired minutes.
7. Repeat steps 3-6 to program additional tracks (up to 63 tracks). 8 . Press MEMOR Y again until track for P-01 is displayed on LCD. Press MEMOR Y again to review programmed tracks. 9. Press PLA Y/P AUSE to play programmed tracks. Press CD-TUNER-SKIP buttons to skip forward or backward through programmed tracks.
Storing Stations in Memory Stereo can store up to 20 FM and 20 AM stations. 1 . Select desired radio station. 2 . Press MEMOR Y . “MEMOR Y” indicator flashes on LCD. 3 . Press PRESET to assign preset number . For example, to store a radio station on preset # 9 , press PRESET nine times until LCD displays # 9 as preset number .
Stereo can be left on or in standby . When timer goes off, stereo will play the previously selected radio station or selected CD track. To disable timer, press TIMER again. T imer on and off setting will be stored in memory for future use. Press TIMER again to activate.
CD door does not completely open • Make sure speaker grills are pressed flush to speakers. No display • Check power plug. No sound • Check speaker connections. • Sound will not play from speakers if headphones are plugged in. If no sound comes out of head- phones, make sure they have been plugged in correctly .
What Is Covered This warranty covers any defects in materials or workmanship, with the exceptions stated below . How Long Coverage Lasts This warranty runs for 90 days from the date of original purchase.
An important point after buying a device Sharper Image CD Stereo (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharper Image CD Stereo yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharper Image CD Stereo - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharper Image CD Stereo you will learn all the available features of the product, as well as information on its operation. The information that you get Sharper Image CD Stereo will certainly help you make a decision on the purchase.
If you already are a holder of Sharper Image CD Stereo, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharper Image CD Stereo.
However, one of the most important roles played by the user manual is to help in solving problems with Sharper Image CD Stereo. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharper Image CD Stereo along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
