Instruction/ maintenance manual of the product CDJ-100S Pioneer
Go to page of 16
1 <DRB1232> En Operating Instructions CONTENTS CAUTIONS REGARDING HANDLING ..................... 3 FEA TURES ................................................................. 4 CONNECTIONS ........................................................
2 <DRB1232> En BEFORE OPERA TIONS CAUTION ÷ Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ÷ The use of optical instruments with this product will increase eye hazard.
3 <DRB1232> En BEFORE OPERA TIONS CAUTIONS REGARDING HANDLING Location Install the player in a well-ventilated location where it will not be exposed to high temperatures or humidity . Do not install the player in a location which is exposed to direct sunlight, or near stoves or radiators.
4 <DRB1232> En BEFORE OPERA TIONS FEA TURES This component is a compact disc player designed for use by DJs, combining the functions and operations re- quired for use in disco clubs with the unique features of the CD medium. OIL-DAMPED SUSPENSION Oil-damped floating suspension protects against vibra- tions and impacts.
5 <DRB1232> En BEFORE OPERA TIONS CONNECTIONS 1. AUDIO OUTPUT CONNECTION A Stereo amplifier connection (without DJ mixer) Make sure that the white plugs are connected to the left (L) jacks and the red plugs to the right (R) jacks. Audio cable (accessory) Connect to the CD or AUX input jacks.
6 <DRB1232> En BEFORE OPERA TIONS: CONNECTIONS 3. POWER CORD CONNECTIONS After all other connections are made, connect the power cord to a household wall outlet or to the auxiliary AC power takeoff on your amplifier . ÷ Make sure plugs are fully inserted into the jacks and wall outlet.
7 <DRB1232> En T op Panel P ANEL F ACILITIES BEFORE OPERA TIONS 1 POWER switch (Located on rear panel) Provides electrical power to the player . 2 Display window ] P. 8 3 DIGIT AL JOG BREAK buttons (JET , ZIP , W AH, HOLD) ] P . 11 4 TRACK SEARCH buttons ( 4 , ¢ ) ] P.
8 <DRB1232> En BEFORE OPERA TIONS: P ANEL F ACILITIES 7 Playback address display The elapsed playback time or remaining playback time of the track playing is roughly indicated with the full-scaled bar graph. ÷ When no disc is in the disc compartment .
9 <DRB1232> En ORDINAR Y CD PLA YER OPERA TIONS BASIC OPERA TION I Setting the Auto Cue function ON/OFF Press and hold the TIME MODE/AUTO CUE button for one or more seconds to toggle the auto cue mode on and off. The auto cue function is turned on when the indicator light showing A.
10 <DRB1232> En BASIC OPERA TION II DJ PLA YER OPERA TIONS Setting a Cue Point Once a cue point is recorded in the memory , pressing the CUE button causes the unit to enter the playback standby mode at the cue point.
11 <DRB1232> En Using Digital Jog Break During playback, press one of the DIGIT AL JOG BREAK buttons (JET , ZIP , W AH); in the display , the indicator cor - responding to the selected effect will flash, and the ef- fect will be applied to the sound in proportion to the amount the jog dial is rotated.
12 <DRB1232> En ADV ANCED OPERA TIONS: SPECIAL DISC JOCKEY TECHNIQUES Jog dial During fader start DJ Mixer DJM-300 or DJM-500 During relay play Cotrol cables Cotrol cable DJ Mixer DJM-300 or DJM.
13 <DRB1232> En ADV ANCED OPERA TIONS MIXING DIFFERENT TRACKS (Example: Mix track B with currently playing track A from the main speakers.) ÷ Connect CD-1 to the DJ mixer’ s CH 1, and connect CD- 2 to CH 2. ÷ Raise the TRIM, CHANNEL F ADER, and MASTER LEVEL settings appropriately so that sound is pro- duced from CD-1.
14 <DRB1232> En ADV ANCED OPERA TIONS DIGIT AL MODE This unit is designed to allow digital output when the rear panel's DIGIT AL OUT switch is set to ON. The following button functions, however , will not oper - ate in the DIGIT AL OUT mode: CUE, DIGIT AL JOG BREAK (JET , ZIP , W AH, HOLD), MAS- TER TEMPO.
15 <DRB1232> En OTHERS: TROUBLESHOOTING Symptom When the auto cue function is set ON, track search is not fin- ished. Back cue function cannot be carried out even though the CUE button is pressed in play- back mode. DJ mode doesn't work. The picture of the TV screen is fluctuated or FM broadcast is interfered with noise.
16 <DRB1232> En PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER NEW MEDIA TECHNOLOGIES, INC. 2265 East 220th Street, Long Beach, California 90810, U.
An important point after buying a device Pioneer CDJ-100S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pioneer CDJ-100S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pioneer CDJ-100S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pioneer CDJ-100S you will learn all the available features of the product, as well as information on its operation. The information that you get Pioneer CDJ-100S will certainly help you make a decision on the purchase.
If you already are a holder of Pioneer CDJ-100S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pioneer CDJ-100S.
However, one of the most important roles played by the user manual is to help in solving problems with Pioneer CDJ-100S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pioneer CDJ-100S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
