Instruction/ maintenance manual of the product SJ-FP813V Sharp
Go to page of 16
Device of this mark is a trademark of Sharp Corporation. Plasmacluster is a registered trademark or a trademark of Sharp Corporation. REFRIGERA T OR - FREEZER OPERA TION MANUAL CONTENTS W ARNING • ................................. 3 CAUTION • .
(B574).indb 2 2014/02/04 9:25:47.
3 WARNING CAUTION Thank you very much for buying this SHARP product. Before using your SHARP refrigerator, please read this operation manual to ensure that you gain the maximum benet from it. This refrigerator is for household only , with ambient temperature between +5°C and +43°C.
4 WARNING Do not install the refrigerator in a damp or wet ■ location as this may cause damage to the insulation and a leakage. Condensation may also build on the outer cabinet and cause rust. 1 Keep adequate ventilation space around the refrigerator.
5 Door pockets 1. (3 pcs.) Refrigerator shelves 2. (2 pcs.) Shelf 3. Bottle pocket (left) 4. Highly sealed vegetable crisper 5. The cover of the Vegetable crisper opens as the case is pulled. Freezer cases (small) 6. (3 pcs.) Freezer cases (large) 7. (2 pcs.
6 T o set sound “ON” Press the button and button simultaneously and continuously for 3 seconds or more again. Control panel Sound OFF indication This indication shows sound “OFF”. Door alarm indication This indication shows door alarm “ON”.
7 OPERATION Plasmacluster The ionizer inside the refrigerator release clusters of positive and negative ions, into the refrigerator compartment. These ion clusters inactivate airborne mould fungus. T o start operation 1 Select “Plasmacluster icon”.
8 Vacation mode Use this feature when going on a trip or leaving the house for long periods of time. T o start operation 1 Select “Vacation mode” icon. 2 Select “ON”. 3 Finalise the setting. T o cancel operation It is the same process as activating this function.
9 Door Alarm Factory has set the door alarm to “ON”. • If the refrigerator door is left open, the door alarm will sound. • The door alarm will sound after 1 minute of opening the • door and again after a further minute has passed. (Once in each case) If the door is left open for approx.
10 Advanced Setting of Freezer / Refrigerator compartment The temperature of freezer compartment and refrigerator compartment can be adjusted in steps of 0.5 °C by following steps 1 to 3 below. Refrigerator compartment Select 1. icon. Press 2. button continuously for 3 seconds or more.
11 STORING FOOD IN OUT Refrigeration reduces the rate of food spoilage. To maximise the shelf life of perishable food products, ensure that the food is of the freshest possible quality. The following is a general guide to help promote longer food storage.
12 The amount of power consumption of this model is measured according to the international standard of the refrigerator performance under the following conditions. All accessories in the freezer • compartment are taken out as indicated on the gure.
13 REPLACING THE PLUG The mains lead of this prod uct is tted with a non-rewire able plug incorporating a 13A fuse. Should the fuse need to b e replaced, a BSI or ASTA approved 13A fuse should be used. IMPORTANT : Never use the plug without the fuse cover tted.
14 Before you call for service, check the following points. Problem Solution The outside of the cabinet is hot when touched. It is normal. The hot pipe is in the cabinet in order to prevent dew generation. When there is refrigerator noise. It is normal for the refrigerator to produce the following sounds.
GUARANTEE Subject to the conditions listed below Sharp Electronics Europe Ltd. (here in after called "the Company") guarantee to provide for the repair of, or at its option replace this Sharp Equipment, or any component thereof, which is faulty or below standard, as a result of inferior workmanship or materials.
TINS-B574CBRZ 14CK TH 1 Printed in Thailand SHARP CORPORATION 22-22, Nagaike-cho, Abeno-ku, Osaka. 545-8522, Japan In Europe represented by SHARP ELECTRONICS EUROPE LTD.
An important point after buying a device Sharp SJ-FP813V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp SJ-FP813V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp SJ-FP813V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp SJ-FP813V you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp SJ-FP813V will certainly help you make a decision on the purchase.
If you already are a holder of Sharp SJ-FP813V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp SJ-FP813V.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp SJ-FP813V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp SJ-FP813V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
