Instruction/ maintenance manual of the product R-1900J Sharp
Go to page of 33
OPERA TION MANUAL AND COOKING GUIDE MODEL R-1900J COMMERCIAL MICROW A VE OVEN J CONTENTS Page W arning 1 Special Notes and W arnings 2 Installation Instructions 3 Oven Diagram 4 Operation of T ouch Co.
1 W ARNING IMPORT ANT SAFETY INSTRUCTIONS : READ CAREFULL Y AND KEEP FOR FUTURE REFERENCE. T o reduce the risk of fi re in the oven cavity: a. Do not overcook food. b. Remove wire twist-ties from paper or plastic bags before placing bag in the oven. c.
2 SPECIAL NOTES AND W ARNINGS DO DON’T Eggs, fruits, nuts, seeds, vegetables, sausages and oysters * Puncture egg yolks and whites and oysters before cooking to prevent “explosion”. * Pierce skins of potatoes, apples, squash, hot dogs, sausages and oysters so that steam escapes.
3 INST ALLA TION INSTRUCTIONS Oven B (Back) Oven A (Back) Screw (d) Screw (e) Screw (d) Mounting plate B Screw (a) Screw (c) Screw (b) Mounting plate A Screw (e) Screw (c) Screw (b) Screw (a) 1. Remove all packing materials from the oven cavity . Remove the protective fi lm(blue fi lm) from the outer case cabinet.
4 1. T ouch control panels 2. Door latch openings 3. Ceramic shelf 4. Oven lamp 5. Air intake openings 6. Air intake fi lter 7. Door seals and sealing surfaces 8. Door hinges 9. Oven door with see-through window 10. Door latches 11. Door handle 12. Splash cover 13.
5 * Before operating your new oven, make sure you read and understand this operation manual completely . 1) Plug in the oven. Nothing will appear in the display at this time. 2) Open the door . The display shows “0”. 3) Close the door . 4) Control panels can only be operated when the door is closed.
6 * Memory Cooking can be set in 6 operating ways. There are multiple methods of selecting memories depending on the input method selected and whether or not Auto Start is turned on or off (for information about Auto Start On/OFF function see Custom Setting 2 on page 9).
7 Express Defr ost with Memory * Suppose you want to cook with memory 0, which was programmed for 10 minutes Express Defrost sequence, Single Digit Input/Auto Start ON.
8 NOTES: 1. It is not necessary to press the POWER LEVEL pad for 100% at the last stage in Multi Stage Cooking. 2. If the total cooking time is over the maximum time allowed, error message, EE9 will be displayed. Press the STOP/ CLEAR pad to clear the error message pad and reduce total cooking time, power levels or stages.
9 Custom Setting Y ou can check your oven settings and customise your oven by changing Custom Settings settings. The CUSTOM SETTING pad has 11 operations. 1. Selecting Memory Input Method 2. Selecting Auto Start Operation 3. Programme Lock Setting 4. Audible Signal Sound V olume Setting 5.
10 * Suppose you want to set Programme Lock ON. x 2 Procedure 1 Press the CUSTOM SETTING pad twice within 2 seconds. 2 Enter 3, 2 for Programme Lock ON. 3 Press the ST ART pad to save the setting. 4 Press the STOP/CLEAR pad to exit from the Custom Setting function.
11 Procedure Display 2 Enter memory number . (After entering the memory number , the memory setting of each content is shown for 1.5 seconds at 0.3 second intervals until the STOP/ CLEAR pad is pressed.) 3 Press the STOP/CLEAR pad to exit from the Custom Setting function.
12 NOTES: 1. Only Dual Digit Input method can be used when inputting memory numbers in Counter Check/Clear . 2. T o clear total manual cooking usage, press the MANUAL/ REPEA T pad in Step 2 instead of the number pad. 3. T o clear total Express Defrost usage, press the EXPRESS DEFROST pad in Step 2 instead of the number pad.
13 Air Filter Cycle Air Filter Cycle can be changed from the factory setting of 100 hours to 001-999 hours * Suppose you want to set the cycle to 250 hours. 2 Press the MANUAL/REPEA T pad. 3 Enter desired time. (Ex : Enter 2, 5, 0 for 250 hours). After about 1 sec.
14 NOTES: 1. Only Dual Digit Input method can be used when inputting memory numbers in Multiplication Factors for Double/ T riple Quantity . 2. The multiplication factors can be set from 0.
15 5 Press the MANUAL/ REPEA T pad and enter desired multiplication for A2 at Stage 2. (Ex: Enter 1, 5 for 0.15.) 1 5 DEF . DEF . DEF . 6 Press the MANUAL/ REPEA T pad and enter desired time for B2 at Stage 2. (Ex: Press 2 for 20 seconds.) DEF . DEF .
16 NOTES: 1. Press the SET MEMORY pad twice within 2 seconds. 2. If the cooking time is over the maximum time, the display will show error code EE9. T o clear the error code, press the STOP/CLEAR pad and re-programme. See Maximum Cooking T ime on page 19.
17 NO. 12 Enter power level for memory 2. 14 Press the STOP/CLEAR pad to exit. NOTES: 1. Press the SET MEMORY pad twice within 2 seconds. 2. If the programmed cooking time is over the maximum time, the display will show error code EE9. T o clear the error code, press the STOP/CLEAR pad and re-programme.
18 1 Press the SET MEMORY pad twice within 2 seconds. NO. X 2 NO. 6 Press the STOP/CLEAR pad. 5 Press the SET MEMORY pad. NOTES: 1. Press the SET MEMORY pad twice within 2 seconds. 2. If the programmed cooking time is over the maximum time, the display will show error code EE9.
19 Maximum Cooking T ime 1. 100%~60% power level : the total cooking time of all cooking stages is maximum 60 minutes. 2. 50%~10% power level : the total cooking time of all cooking stages is maximum 120 minutes. 3. Multi Stage Cooking : the Maximum Cooking T ime is limited by the following calculation.
20 Maintenance Mode Should any of the following maintenance indicators (CC1, CC2, CC3, CC4) appear in the display , please contact your Sharp Approved Service Centre for service. CARE AND CLEANING CLEAN THE OVEN A T REGULAR INTERV ALS IMPORT ANT • The oven should be cleaned regularly and any food deposits removed.
21 Splash Cover: A T LEAST ONCE A WEEK, REMOVE THE SPLASH COVER AND WASH BOTH SIDES OF IT IN A MILD DETERGENT SOLUTION. A BUILD UP OF GREASE MA Y OVERHEA T AND BEGIN TO SMOKE AND MA Y BURN THE SPLASH COVER. THE SPLASH COVER IS LOCA TED IN THE TOP OF THE OVEN AND MA Y EASIL Y BE REMOVED.
22 SER VICE CALL CHECK Please check the following before calling for service: 1. When the door is opened, does the oven lamp come on? YES ________ NO _________ 2. Place one cup of water (approx. 250 ml) in a glass measure in the oven and close the door securely .
23 HELPFUL HINTS 1. THE ARRANGEMENT Arrange foods carefully . Place thickest areas toward outside of dish. 2. TURNING Foods such as poultry and joints of meat should be turned over after half the cooking time. 3. COVERING Cover foods in the microwave if you would normally cover the food in your ordinary oven, or to retain moisture.
24 FOOD DEFROSTING TIME MICROWA VE POWER LEVEL METHOD Beef, Lamb & Pork Joints (uncooked) 8 min. /500g 10% 1. Place on a large plate. 2. T urn over 4-5 times during defrosting. NOTE: If necessary , small pieces of aluminium foil can be used to shield small areas of meat which may become warm during defrosting.
25 FOOD COOKING TIME MICROW A VE POWER LEVEL METHOD Beef: Medium (T opside, Silverside) Chilled (5°C) 6-7 min. /500g 70% 1. Place fat side down in a fl an dish. 2. T urn over halfway through cooking and remove juice. 3. After cooking, wrap in foil and leave to stand for 8 minutes before serving.
26 Cooking Chart FOOD COOKING TIME MICROW A VE POWER LEVEL METHOD Corn on the Cob Fresh (20°C) Frozen (-18°C) 2-3 min. for 2 cobs 4-5 min. for 2 cobs 100% 1. Place in a dish, add 60ml (4tbsp) water . 2. Cover with microwave cling fi lm pierce in 4-5 places.
27 FOOD TEMP QUANTITY METHOD REHEA TING TIME ON 100% BREAKF AST Porridge Chilled 125g Place in a bowl, uncovered 35 sec. Scrambled Egg Chilled 125g Place on a plate, uncovered 30 sec. Scrambled Egg with bacon or sausage Chilled 175g As above 50 sec. Bacon Chilled 4 rashers As above 25 sec.
28 FOOD TEMP QUANTITY METHOD REHEA TING TIME ON 100% PREP ARED DISHES Duck à l’orange Chilled 540g Place on a plate, cover with cling fi lm 3 min. 15 sec. Spaghetti Bolognese Chilled 300g As above 1 min. 15 sec. Chicken in a sauce Chilled 300g As above 2 min.
29 FOOD TEMP QUANTITY METHOD REHEA TING TIME ON 100% CANNED FOODS Baked Beans Room 420g Place in a bowl, cover with cling fi lm, stir halfway through cooking 1 min. 30 sec. Soup - thick/thin Room 420g As above 1 min. 50 sec. Hot Dogs Room 425g Place in a bowl, cover with cling fi lm 1 min.
30 FOOD TEMP QUANTITY METHOD REHEA TING TIME ON 100% MEA T PORTIONS Chicken Portions Leg Breast Chilled Chilled 1 (300g) 1 (400g) Place on a plate, cover with cling fi lm Place on a plate, cover with cling fi lm 1 min. 1 min. 30 sec. Lamb Chops Chilled 3 (225g) Place on a plate, cover with cling fi lm 1 min.
Cong ratu lati ons on Yo ur P urch ase! This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below. If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre.
XL-D AB151PH_A US Back.fm 2011J uly29 FOR LOCA TION ENQUIRIES WITHIN A USTRALI A REGARDING Y OUR LOCA L SHARP APPRO VED SE RVICE CENTRE VISIT OUR WEBSITE A T www .
An important point after buying a device Sharp R-1900J (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp R-1900J yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp R-1900J - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp R-1900J you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp R-1900J will certainly help you make a decision on the purchase.
If you already are a holder of Sharp R-1900J, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp R-1900J.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp R-1900J. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp R-1900J along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
