Sharp PNA601 Computer Monitor manual

Summary of contents each page of manual

Page 1

PN-A601 LCD MONIT OR OPERA TION MANUAL.
Page 2

IMPORT ANT : T o aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product.
Page 3

3 E IMPORT ANT INFORMA TION W ARNING:  TOREDUCE THERISKOFFIREORELECTRICSHOCK,DONOTEXPOSE THISPRODUCT TORAINORMOISTURE. RISKOFELECTRIC SHOCK DONOTOPEN CAUTION CAUTION:  TOREDUCE THERISKOFELECTRIC SHOCK,DONOTREMOVECOVER.
Page 4

4 E IMPORT ANT INFORMA TION (Continued) A. Information on Disposal for Users (private households) 1. In the European Union Attention:Ifyouwanttodisposeofthisequipment,please.
Page 5

5 E ThankyouforyourpurchaseofaSHARPLCDproduct. T oensuresafetyandmanyyearsoftrouble-freeoperationofyour product, please read the Safety Precautions carefully before using this product.
Page 6

6 E SAFETY PRECAUTIONS (Continued)  19. Batteries—Incorrectuseofbatteriesmaycausethebatteriestoburstorignite. A leakybatterymaycorrodetheequipment, dirty your hands or spoil your clothing.
Page 7

7 E - The TFTcolorLCDpanelusedinthismonitorismadewith theapplicationofhighprecisiontechnology .However ,there may be minute points on the screen where pixels never light or are permanently lit.
Page 8

8 E MOUNTING PRECAUTIONS • Thisproductisforuseindoors. • A mountingbracketcompliantwithVESA specicationsis required. • Sincethemonitorisheavy ,consultyourdealerbefore installing, removing or moving the monitor .
Page 9

9 E Contents Supplied Components If any component should be missing, please contact your dealer .  LiquidCrystalDisplayMonitor:1  Remotecontrolunit:1  Cableclamp:2 .
Page 10

10 E n Front view 1 34 56 2 1. LCD panel 2. Brightness sensor 3. Remote control sensor 4. Input switch 5. Power switch 6. Power LED TIPS • Useapointedobjectsuchasapentiptopressthe switches at the front of the monitor .
Page 11

11 E Part Names n Remote control unit 1 2 3 4 5 6 7 12 9 10 11 8 1. Signal transmitter 2. POWER button 3. MUTE button 4. VOL +/Cursor control ( ) button 5. BRIGHT -/Cursor control ( ) button 6. DISPLA Y button 7. MODE button 8. INPUT button 9. MENU button 10.
Page 12

12 E 11 10 9 8 1 2 3 4 5 7 12 6 15 14 13 17 16 When the PN-ZB01 (optional) is attached Caution • Besuretoturnoffthemainpowerswitchanddisconnect the plug from the power outlet before connecting/ disconnecting cables.
Page 13

13 E Connecting Peripheral Equipment (Exampleconnection) shows the signal flow PC/A V DVI-D input terminal First monitor Second monitor PC/A V DVI-D output termina l PC/A V DVI-D input terminal Dig.
Page 14

14 E ■ Connection with the control kit (optional) Caution • Whenattachingtheremotecontrolsensorbox,turnthe mainpowerswitchOFF . • Exceptfortheremotecontrolsensorboxconnectioncable, do not insert any other cable into the control kit terminal.
Page 15

15 E Preparing the Remote Control Unit Installing the batteries 1. Pressthecovergentlyandslideitinthedirectionofthe arrow . 2. See the instructions in the compartment and put in the batteries(R-6(“AA”size)x2)withtheirplus(+)andminus (-)sidesorientedcorrectly .
Page 16

16 E Binding Cables The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamps. Insert the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables.
Page 17

17 E Removing the Handles The handles can be removed. Remove the handle screws and remove the handles and handle spacers. Caution • Thehandles,handlescrewsandhandlespacersarefor thismonitor .Donotusethemforanyotherdevices.
Page 18

18 E T urning Power On/Off Caution • T urnonthemonitorrstbeforeturningonthePCor playback device. T urning on the main power Main power switch Caution • Themainpowermustbeturnedon/offwiththemainpower switch.
Page 19

19 E Basic Operation 1 2 3 4 5 6 7 8 1. INPUT (Input mode selection) The menu is displayed. Press or to select the input mode, and press to enter . Input mode Video Audio PCD-SUB PCD-subinput.
Page 20

E 20 Basic Operation n Switching the screen size Evenwhenthescreensizeischanged,thedisplaymayremainthesamedependingontheinputsignal. WIDE PCinput Displaysimagesoitllstheentirescreen.
Page 21

21 E Menu Items Displaying the menu screen Videoandaudioadjustmentandsettingsofvariousfunctions are enabled. This section describes how to use the menu items.
Page 22

E 22 Menu item details The menu will differ depending on the input mode. n SCREEN Y ou can move the menu screen display position each time DISPLA Y is pressed. AUTO (PC D-SUB/PC RGB) TheCLOCK,PHASE,H-POS,andV -POSareautomatically adjusted.
Page 23

E 23 USER AdjustseachitemwhentheWHITEBALANCEissetto USER. R-CONTRAST .... Adjustsbright-tonedredcomponent. G-CONTRAST .... Adjustsbright-tonedgreencomponent. B-CONTRAST .... Adjustsbright-tonedbluecomponent.
Page 24

E 24 Menu Items HDMI AUTO VIEW WhenONisselected,thescreensizeisadjusted automaticallyaccordingtothescreensizecontrolsignal includedinthevideosignalinputfromthe A VHDMIinput terminal.
Page 25

E 25 Menu Items n OPTION DA TE/TIME SETTING Set the date and time. Press or to select the date and time, and press or to change the numerical values. Setthedatein“Month/Day/Y ear”order . Setthetimeona12-hourbasis.(Factorydefault) DA TE/TIME FORMA T Sets the date/time display format.
Page 26

E 26 Menu Items n MUL TI ENLARGE (See page 27.) Sets whether or not to use the enlarge function. ADV ANCED (ENLARGE) ENLARGEH/ENLARGEV ......... Sets the number of screen splits (number of monitors)inthehorizontal/verticaldirectionusedfor the enlargement.
Page 27

E 27 n Dual screen display Y oucandisplaythescreensofthePCinputsignaland A V input signal simultaneously . Setthisfunctionwith“PIPMODES”inthePIP/PbyP menu. PIP Main screen Sub screen A sub s cree n is displ ayed inside a main screen.
Page 28

E 28 n ZOOM2 SPECIAL SETTING If you connect a laptop computer with any of the following screen resolutions and black bands appear around the screen,setZOOM2SPECIAL SETTINGofINPUTSIGNAL on theOPTIONmenutoONandthenselectZOOM2intheSIZE setting.
Page 29

E 29 n ADV ANCED items (A V input) (See page 22 for additional Menu item details.) FLESH TONE Adjustthehuecontrol. 3D-NR Reduce the noise of playback images on video. Settingahigherlevelreducesmorenoise.However ,itmay cause blurring on an image.
Page 30

30 E Y oucanreturnthesettingstotheirfactory-presetvaluesand restrict operations. 1. Press SIZE until “F” is displayed in the upper left area of the screen, then while “F” is being displayed, press , , , and in that order .
Page 31

31 E Controlling the Monitor with a PC (RS-232C) Y oucancontrolthismonitorfromaPCviaRS-232C(COM port)onthePC.
Page 32

E 32 Controlling the Monitor with a PC (RS-232C) n Response code format When a command has been executed correctly O K Return code (0D H , 0A H ) A response is returned after a command is executed.
Page 33

E 33 Controlling the Monitor with a PC (RS-232C) Advanced operation This section explains commands for daisy chain connection. The basic communication procedure is the same as in the “One-to-oneconnectionwithaPC”section. n ID numbers Y oucanassignauniqueIDnumbertoeachmonitor(see page 24).
Page 34

E 34 Controlling the Monitor with a PC (RS-232C) IDLK ........ TheparameterofthiscommandsetstheID numberofthemonitor . Themonitorissubjecttoall subsequentcommands. Example: IDLK0002 ← Followingcommandsareforthemonitor withIDnumber:2.
Page 35

E 35 n Repeater control command RepeatercontrolisachievedbysettingtheFOURTH CHARACTERoftheparameterto“+”. Example: VOLM030+ ← Setsvolumeofallmonitorsto30. In repeater control, responses are returned by all the connected monitors.
Page 36

E 36 RS-232C command table How to read the command table Command: Commandeld(Seepage31.) Direction: W Whenthe“Parameter”issetintheparametereld(seepage31),thecommandfunctionsasdescribed under“Control/ResponseContents”.
Page 37

E 37 SCREEN menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) AUTO ASNC W 1 WhentheinputmodeisPCD-SUB,PCRGB. - ○ ○ CLOCK CLCK WR 0-1200 0-1200 WhentheinputmodeisPCD-SUB,PCRGB.
Page 38

E 38 PICTURE menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) AUTO AGIN W 1 WhentheinputmodeisPCD-SUB,PCRGB. - ○ ○ ANALOGGAIN ANGA WR 0-127 0-127 WhentheinputmodeisPCD-SUB,PCRGB.
Page 39

E 39 AUDIO menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) TREBLE AUTR WR -5-5 -5-5 ○ ○ ○ BASS AUBS WR -5-5 -5-5 BALANCE AUBL WR -10-10 -10-10 RESET ARST .
Page 40

E 40 Controlling the Monitor with a PC (RS-232C) OPTION menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) DA TE/TIMESETTING DA TE WR AABBCCDDEE AABBCCDDEE AA:�.
Page 41

E 41 MUL TI menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) ENLARGE ENLG WR 0-1 0-1 0:OFF ,1:ON - ○ ○ ENLARGEMODE EMAG WR 0-4 0-4 0:OFF ,1.
Page 42

E 42 PIP/PbyP menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) PIPMODES MWIN WR 0-3 0-3 0:OFF ,1:PIP ,2:PbyP ,3:PbyP2 ○ ○ ○ PIPS.
Page 43

E 43 Others Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) SCREENSIZE(PC) WIDE WR 1-5 1-5 1:WIDE,2:NORMAL,3:DotbyDot,4:ZOOM1,5:�.
Page 44

44 E WhenthePN-ZB01(optional)isattached,yourmonitorcan beconnectedtoaLANallowingyoutocontrolitfromaPCon the LAN. Y oucanalsocongurethemonitortosende-mailnotication when it has a problem.
Page 45

45 E 45 ■ T o set from a PC WhenthemonitorisconnectedtoaPC,LANsettingscanbe conguredviaPC. Set up process (1)ConnectyourmonitortoaPC.
Page 46

46 E 46 7. Specifythe“DHCPCLIENT”,“IP  ADDRESS”,etc. DHCP CLIENT IfyourLANhasaDHCPserverandyouwishtoobtainan address automatically , change this setting to “ON”. T osettheaddressmanually ,setthisto“OFF”.
Page 47

47 E 47 ■ INFORMA TION Information about this monitor appears. ■ CONTROL Y ou can control the operations corresponding to the buttons ( POWER INPUT SIZE )ontheremotecontrolunit.(Seepage19.) TIPS • Instandbymode,PowerONistheoperationavailable.
Page 48

48 E 48 ■ NETWORK (LAN SETUP) This screen allows you to set the settings necessary when the monitor is connected to a LAN. DHCP CLIENT IfyourLANhasaDHCPserverandyouwishtoobtainan address automatically , change this setting to “ON”.
Page 49

49 E 49 ■ NETWORK (GENERAL) This screen allows you to specify the general LAN settings. MONITOR NAME Specify a name for this monitor as it should appear on the InternetExplorerscreen. AUTO LOGOUT TIME Specify the time (in minutes) to elapse before automatically disconnecting this monitor from the network.
Page 50

50 E 50 ■ MAIL (RECIPIENT) Thisscreenallowsyoutospecifytherecipientsofthee-mail sent periodically or when the monitor has an error . RECIPIENT E-MAIL ADDRESSES Specifythee-mailaddressestosenderrornoticatione-mail to.
Page 51

51 E 51 Controlling the Monitor with a PC (LAN) ■ SNMP Y oucanconguresettingsrelatedtoSNMP . SNMP SETTING Set whether to enable or disable SNMP . VERSION Set the version of the SNMP to be supported. COMMUNITY NAME 1 to 3 Setthenameofthecommunityrequiredfortheaccess.
Page 52

52 E T roubleshooting If you are experiencing any problem with your display , before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Isthepowercorddisconnected?(Seepage16.
Page 53

53 E 53 The Power LED is ashing in red and green alternately . When “TEMPERA TURE” is displayed in the corner of the screen. • Whentheinternaltemperatureofthemonitorrises excessively , the brightness of the backlight decreases automaticallyinordertopreventhigh-temperature- relatedproblems.
Page 54

54 E Specications n PN-A601 Product Specications Model PN-A601 LCDcomponent 60"Class[60inch(152.5cm)diagonal]TFT LCD Max. resolution (pixels) 1920x1080 Max. colors Approx.1.06billioncolors Pixel pitch 0.
Page 55

55 E Specications n Dimensional Drawings Note that the values shown are approximate values. Unit: inch [mm] 54-1/8 [1374] Opening width (52-1/2 [1334]) Opening height (29-5/8 [753]) 31-1/4 [793] 3-.
Page 56

56 E n Compatible signal timing (PC) VESA Wide US TEXT Sun Screen resolution Hsyn c V syn c D ot frequency Digital 640 × 480 800 × 600 848 × 480 1024 × 768 1 152 × 864 1280 × 768 1280 × 800 128.
Page 57

57 E n Compatible signal timing (A V) Screen resolution Frequency DVI-D* 1 HDMI Component 1920×1080p 24Hz - Ye s - 50Hz Ye s Ye s Ye s 59.94Hz Ye s Ye s Ye s 60Hz Ye s Ye s Ye s 1920×1080i 50Hz Ye s Ye s Ye s 59.94Hz Ye s Ye s Ye s 60Hz Ye s Ye s Ye s 1280×720p 50Hz Ye s Ye s Ye s 59.
Page 58

58 E Specications n PC/A V DVI-D input terminal pins (DVI-D 24 pin) No. Function No. Function 1 TMDSdata2- 13 N.C. 2 TMDSdata2+ 14 +5V 3 TMDSdata2/4shield 15 GND 4 N.C. 16 Hot-plugdetection 5 N.C. 17 TMDSdata0- 6 DDCclock 18 TMDSdata0+ 7 DDCdata 19 TMDSdata0/5shield 8 N.
Page 59

59 E Mounting Precautions (For SHARP dealers and service engineers) • Wheninstalling,removingormovingthemonitor ,ensurethatthisiscarriedoutbyatleast2people. • Besuretouseawall-mountbracketdesignedordesignatedformountingthemonitor .
Page 60

PN-A601MuEN1 1J(1).

Read the Sharp PNA601 manual - avoid problems

An important point after buying a device Sharp PNA601 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:

to know how to properly use the device
to know how to perform maintenance/ periodic checks of correct operation of the product Sharp PNA601
to know what to do in case of failure Sharp PNA601

If you have not bought Sharp PNA601 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp PNA601 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp PNA601 you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp PNA601 will certainly help you make a decision on the purchase.

If you already are a holder of Sharp PNA601, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp PNA601.

However, one of the most important roles played by the user manual is to help in solving problems with Sharp PNA601. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp PNA601 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center

Sharp PNA601 manual

Share URL

Similar manuals

Share URL

Similar manuals

Summary of contents each page of manual

Page 1

Page 2

Page 3

Page 4

Page 5

Page 6

Page 7

Page 8

Page 9

Page 10

Page 11

Page 12

Page 13

Page 14

Page 15

Page 16

Page 17

Page 18

Page 19

Page 20

Page 21

Page 22

Page 23

Page 24

Page 25

Page 26

Page 27

Page 28

Page 29

Page 30

Page 31

Page 32

Page 33

Page 34

Page 35

Page 36

Page 37

Page 38

Page 39

Page 40

Page 41

Page 42

Page 43

Page 44

Page 45

Page 46

Page 47

Page 48

Page 49

Page 50

Page 51

Page 52

Page 53

Page 54

Page 55

Page 56

Page 57

Page 58

Page 59

Page 60

Read the Sharp PNA601 manual - avoid problems

Other manuals from the category Computer Monitor

321 Studios W2043T

321 Studios W2243T

321 Studios W2343T

3M 11-71315-225-01

3M 11-71315-227-01

3M 11-81375-227

3M 3M034-030-TNG and 3M034-031-TNG

3M 3M034-3-TNG

3M 725

3M ET 355