Instruction/ maintenance manual of the product DA1200P Avocent
Go to page of 9
Emerge ® DA1200P 1x2 PC/VGA Distribution Amplifier User/Installer Guide Avocent, the Avocent logo and Emerge are regist ered trademarks of Avocent Corporation. All other marks are the property of their respective owners. © 2008 Avocent Corporation. All rights reserved.
Table of Contents 1.0 Introduction 3 2.0 Specifications 4 3.0 Package Contents 5 4.0 Connecting the Hardware 5 5.0 Operating The Unit 6 6.0 Troubleshooting 7 7.
3 1.0 INTRODUCTION Thanks for purchasing this DA1200P PC /VGA Distribution Amplifier from Avocent. The DA1200P VGA D.A. is designed to handle standard RGBHV computer type signals. Model DA1200P prov ides 2 outputs from a single input. Additional outputs can be provided by cascading additional amplifiers.
4 2.0 SPECIFICATIONS General Function DA1200P Voltage Requirement 5 VDC Current Requirement 2A Input Connector (HD-15 Female) 1x Output Connectors (HD-15 Female) 2x Maximum Resolution 2560x1600 @ 60Hz Signal Bandwidth 500+ MHz Weight (Amplifier Only) 400 g 14.
5 3.0 CHECKING PACKAGE CONTENTS Before attempting to use this unit, pleas e check the packaging and make certain the following items are cont ained in the shipping carton: • 1x Distribution Amplifie.
6 5.0 OPERATING THE UNIT 5.1 Connect the Unit as follows: 1. Turn off power to source device (s uch as PC) and to all display devices (such as monitors). 2. Connect the output of t he source device to the am plifier’s input with the HD-15 cable provided.
7 6.0 TROUBLESHOOTING Problems with the DA1200 P amplifier are rare. Most of the time, the problem is caused by the use of an incorrect cable fo r the signal type, to long a cable run, bad connectors on the cable and occasionally damaged cables.
8 Connecting this equipment to external devices requires no specially shielded cabling for FCC compliance. The Instru ction Manual shows or describes the proper connection of this equipment for oper ation that insures FCC compliance. Direct all inquiries regarding FCC compliance to: Avocent Corporation 4991 Corporate Dr.
Where AV and IT Meet 590-832-501A.
An important point after buying a device Avocent DA1200P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Avocent DA1200P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Avocent DA1200P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Avocent DA1200P you will learn all the available features of the product, as well as information on its operation. The information that you get Avocent DA1200P will certainly help you make a decision on the purchase.
If you already are a holder of Avocent DA1200P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Avocent DA1200P.
However, one of the most important roles played by the user manual is to help in solving problems with Avocent DA1200P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Avocent DA1200P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
