Instruction/ maintenance manual of the product FU-A80J Sharp
Go to page of 16
ENGLISH Device of this mark is a trademark of Sharp Corporation. Plasmacluster is a registered trademark or a trademark of Sharp Corporation. AIR PURIFIER OPERA TION MANUAL FU-A80J Free standing type H_FU-A80J-EN.
Please read before operating your new Air Puri er Some odour ingredients absorbed by the lters may become separated and may be discharged through the air outlet and result in additional odour .
E-1 ENGLISH ENGLISH CONTENTS IMPORT ANT SAFETY INSTRUCTIONS ... E-2 P ART NAMES ............................................. E-4 FIL TER INST ALLA TION ........................... E-6 OPERA TION ............................................... E-7 MAINTENANCE .
E-2 Read all instructions before using the unit. When using electrical appliances , basic safety precautions should be followed, including the following: W ARNING - T o reduce the risk of electrical shock, re or injury to persons: • Connect the power plug to a dedicated electrical outlet for 230-240V ~ 50Hz.
E-3 ENGLISH CAUTIONS CONCERNING OPERA TION • Do not block any opening. • Do not use the unit near or on hot objects, such as stoves or heaters or radiators. • Do not use the unit with the wrong position. • Always hold the handle on both sides of the unit when moving it.
E-4 P ART NAMES ILLUSTRA TIVE DIAGRAM INCLUDED • Operation manual BACK 1 3 4 2 7 5 6 8 9 10 1 Air Outlet 2 Air Inlet 3 Handle 4 Main Unit 5 HEP A Filter 6 Deodorizing Pre Filter 7 Dust Sensor 8 Date Label 9 Power Cord 10 Plug H_FU-A80J-EN.
E-5 ENGLISH MAIN UNIT DISPLA Y 1 1 12 13 14 15 16 17 1 1 QUICK CLEAN Button / Quick Clean Indicator Light (green) 12 (Plasmacluster) ON / OFF Button / (Plasmacluster) ON / OFF Indicator Light (green) 13 CLEAN SIGN The color changes according to the air condition.
E-6 FIL TER INST ALLA TION Unplug the electrical cord before performing any maintenance. T o maintain the quality of the lters, they are installed in the main unit and packed in plas- tic bags. Be sure to remove the lters from the plastic bags before using the unit.
E-7 ENGLISH OPERA TION 1 Press to start / stop. Unless the power cord has been unplugged, the operation starts in the previous mode it was operated in. FP-A80U 2 Press to select fan speed. 3 Press to turn Plasmacluster Ion Mode ON and OFF . Press to start Quick Clean Mode.
E-8 CLEANING THE FIL TERS 1 T urn off the unit, and unplug the power cord. 2 Remove the Front Panel. (Refer to E-6) 3 Clean the lter and Dust sensor . Gently remove dust from the lter , using a vacuum cleaner with attachment or similar tool. Dust Sensor Remove the Sensor cover , and remove the dust on the Sensor lter .
E-9 ENGLISH CLEANING THE UNIT FIL TER REPLACEMENT GUIDELINES Filter life varies depending on the room environment, usage, and location of the unit. If dust or odour persists, replace the lter .
E-10 TROUBLESHOOTING Before calling for service, please review the T roubleshooting chart below , since the problem may not be a unit malfunction. PROBLEM SOLUTION (not a malfunction) The unit leaves smoke and odours in the air . • Clean o r replac e the lte rs as needed.
E-1 1 ENGLISH FOR CUST OMER ASSIST ANCE Cong ratulat ions on Your Pu rchase ! This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below. If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre.
E-12 FOR CUST OMER ASSIST ANCE FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP CORPORATION OF NEW ZEALAND LIMITED VISIT OUR WEBSITE AT SHARP CUSTOMER SERVICES TELEPHONE: 09 573 0111 FACSIMILE: 09 573 0113 FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.
E-13 ENGLISH SPECIFICA TIONS Model FU-A80J Power supply 230-240V 50 Hz Fan Speed Operation Fan Speed Adjustment MAX MED LOW Rated Power (W) 75 20 5 Fan Speed (m 3 /hour) 480 300 120 Noise Level (dBA) 53 41 23 Recommended Room Size *1 62m 2 Sensor Dust Filter type HEP A lter / Deodorizing Pre lter Cord Length 2.
Printed in Thailand TINS-A499KKRZ 1 1J- TH 1 SHARP CORPORA TION OF AUSTRALIA PTY .L TD. A. B. N. 40 003 039 405 1 HUNTINGWOOD DRIVE, HUNTINGWOOD, N.S.W . 2148 P .O.BOX 6827, BLACKT OWN. N.S.W . 2148 SHARP CORPORA TION OF NEW ZEALAND LIMITED 59 HUGO JOHNSTON DRIVE PENROSE, AUCKLAND H_FU-A80J-EN.
An important point after buying a device Sharp FU-A80J (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp FU-A80J yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp FU-A80J - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp FU-A80J you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp FU-A80J will certainly help you make a decision on the purchase.
If you already are a holder of Sharp FU-A80J, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp FU-A80J.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp FU-A80J. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp FU-A80J along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
