Instruction/ maintenance manual of the product FU-40SE Sharp
Go to page of 18
ENGLISH R FU-40SE FRANÇAIS ENGLISH DEUTSCH ESPAÑOL ITALIANO Ta b letop / wall-mounting type Tisch- / W andgerät T ype de tab le / installation murale De sobremesa / instalación en la pared Tipo da.
.
ENGLISH FEA TURES Cluster Ion Contr ol The unit controls the ratio of minus cluster ions and plus cluster ions depending on the condition of the room. • Clean mode Appro ximately the same amount of plus and minus cluster ions are discharged. This mode is eff ective f or reducing floating mold and household odors in the air .
• Do not use the unit if the power cord or plug is damaged or the connection to the wall outlet is loose. Electrical shock, short circuit and/or fire may occur as a result. • Do not damage, break, coat, forcefully bend, pull, twist, bundle, pinch or place heavy objects on the power cord.
ENGLISH CA UTIONS CONCERNING THE USA GE OF THIS PRODUCT • Do not bloc k the intake and exhaust ports. • Do not use the unit near or on hot objects, such as a sto ve, etc. Also, do not use the unit where it ma y come into contact with steam. • Do not use the unit on its side.
Plasmacluster NAMES OF P AR TS MAIN UNIT DISPLA Y Filter timer lamp AU TO operation lamp F an lev el lamps * T obacco smok e mode operation lamp Pollen mode operation lamp OFF timer displa y lamps (se.
ENGLISH AC CESSORIES Remote control (1 unit) Battery (AA batter y X 2 units) When using on tabletop Stand (1 unit) Thumbscrew (2 units) Located on bottom of stand CLUSTER ION LAMP Cluster ion operation is selected using the remote control.
INST ALLA TION WHEN USING THE UNIT ON A T ABLET OP MOUNTING THE ST AND 1 Remove the front panel. • At this time, also remo ve the pre-filter , stamina-pow er carbon and the HEP A filter . Front panel 2 Place the unit with its front side facing down on a flat and stable surface.
ENGLISH 2 Mount mounting bracket 1 • Install it after you ask a specialist and you can get the confirmation of the strength. •M ount the bracket using the included wood screws (long screws) so that it level. Mount the bracket to the back of the main unit using the included small screws (2 units).
PREP ARA TION Be sure to remove the power plug from the wall outlet. INST ALLING THE FIL TERS To maintain the quality of the filters , they are installed in the main unit within polyvinyl bags . Be sure to remove the filters from the polyvinyl bags before using the unit.
ENGLISH 2 Install the filter 1 Remo ve the HEP A filter from the polyvinyl bag and install it in the main unit with the display facing up. Inser t so that the tabs on the HEP A filter are facing toward you. Proper operation cannot be achieved when installing the filter backwards.
OPERA TION MAIN UNIT OPERA TION The unit will start operation when the MODE-ON/OFF button is pressed. (The unit will star t operation in A UT O mode) • During operation, the cluster ion lamp will light. (During star t of operation, the cluster ion mode will be A UT O) The operation mode suitab le for the usage condition can be set.
ENGLISH REMOTE CONTROL OPERA TION •T o star t operation, press the ON/OFF b utton. A short beep will sound and operation will start in the AU T O mode. •T o stop operation, press the ON/OFF b utton again. A long beep will sound and operation will stop.
CARE AND MAINTENANCE (T o maintain the best perf or mance of this product, please clean the unit periodically .) When cleaning, be sure to remove the power plug from the wall outlet. In addition, never handle the power plug with wet hands. Electrical shock and/or bodily injury may occur as a result.
ENGLISH Guide for filter replacing timing • The f ollo wing is a guide from JEM 1467 by J apan Electr ical Manuf acturers Association in Japan, and in JEM 1467, the replacement period is set as when smoking 10 cigarettes per day and the dust collection/deodorization power is reduced by half than that of new filters.
TROUBLESHOOTING Before calling f or repair, chec k the symptoms below f or possible remedies , since the problem ma y not be a malfunction of the unit.
ENGLISH HECCRBQ Во испо лнение Статьи 5 Зак она Р оссийс к ой Федерации «О защите прав потребителей» , а также Указа Правительства Р оссийск ой Федерации № 720 от 1 6 июня 1 997 г .
SER VICE PROCEDURE / SER VICE V ORGEHENSWEISE SER VICE PR OCEDURE - ONL Y EFFECTIVE IN GERMANY Dear SHARP customer , SHARP machines are proprietar y ar ticles which are produced with precision and care according to most moder n production methods .
An important point after buying a device Sharp FU-40SE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp FU-40SE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp FU-40SE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp FU-40SE you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp FU-40SE will certainly help you make a decision on the purchase.
If you already are a holder of Sharp FU-40SE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp FU-40SE.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp FU-40SE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp FU-40SE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
