Instruction/ maintenance manual of the product 4000 Avital
Go to page of 16
AviStart 4000 Owner’s Manual -FRONT COVER.
I WARNING I ! Always exercise caution and common sense when operating your AviStart system. ! This product is intended for vehicles with fuel-injection and automatic transmissions only. NEVER attempt to remote star t a vehicle with a manual (stick shift) transmission.
Table of Contents AviStart 400 0 ............................... . 2 Lifetime Warrant y ............................ 2 Remote Controls ............................ 2 Stealth Codin g T echnology ....................... 3 Electronic Scan Prevention (ESP ) .
AviStart 400 0 Congratulations! You have just purchased the AviStart 4000 , a keyless entr y and remote engine starter system manufactured by Avital Technologies, Inc. You are about to experience the convenience and luxury of being able to star t your vehicle engine from the comfort of your home, office, department store or other remote location.
Stealth Codin g Technology Stealth Coding™ technology offers the most advanced protection availabl e against "code-grabbing" devices which thieves may use to record the digita l code transmitted by your remote control. When you leave the area, thieve s can then play back the code to unlock the doors and deactivate your system .
Operating Your AviStar t Remote-Controlled Door Lock/Unlock * To Lock the Doors: Press the remote control LOCK button for 1-2 seconds. The doors will lock , the parking lights will flash twice and the dash mounted LED will flash slowly. If the Remote Lock Starter Disable feature was programmed ON, the vehicl e starter motor will be disabled.
To Activate : 1 . Press the remote control LOCK button for 3-4 seconds . 2. The siren/horn will sound and the parking lights will flash. 3 . If the ignition key is "OFF," the doors will unlock. If the ignition key i s "ON," the doors will lock .
Remote Engine Start - Safety and Counter-Theft I CAUTIO N : Be sure to read the "WARNING" bulletin on the insid e cover of this manual befor e attempting to operate remote start.
To Remote Start the Engine : 1 . Press the remote control START button for 1-2 seconds, 10-15 minutes before you enter the vehicle (this will allow the climate control time t o heat or cool the vehicle.
temperature every 2½ hours and will only start the engine during extreme cold temperatures. There are three temperature levels to choose from. (Thi s feature is programmed OFF from the factory and must be programmed ON t o operate. (See the "Programming Table for System Features"on page 11).
To Deactivate: 1 . When you return to the vehicle, press the remote control UNLOCK button for 1-2 seconds. The doors will unlock. 2 . Enter the vehicle (do not touch the brake pedal), turn the ignition key to the "ON" position and then press the brake pedal.
User-Programmable Feature s All AviStart system and remote control programmable features are accomplished by turning the ignition key on (or starting the engine) an d flicking the valet switch on and off a preset number of times.
Programming Table for System Feature s Featur e Factor y Settin g No. o f Beep s Secondary Actio n Ignition-Controlle d Lock/Unlock O N 6 Wait 3 seconds, the piezo beeper will bee p once for OFF, twice for ON . Passive Starter Disabl e OFF 7 Wait 3 seconds, the piezo beeper will bee p once for OFF, twice for ON .
Programming Table for Remote Control s Featur e Factor y Settin g No. o f Beep s Secondary Actio n Remote Door Lock/Pani c LOCK Button 15 Press the LOCK Button, the piezo beepe r will beep 1 time . Remote Door Unloc k UNLOC K Button 16 Press the UNLOCK Button, the piezo beeper will beep 2 times .
AviStart 4500 Owner’s Manual - Rev. A 089 8.
AviStart 4500 Owner’s Manual - Rev. A 089 8.
An important point after buying a device Avital 4000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Avital 4000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Avital 4000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Avital 4000 you will learn all the available features of the product, as well as information on its operation. The information that you get Avital 4000 will certainly help you make a decision on the purchase.
If you already are a holder of Avital 4000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Avital 4000.
However, one of the most important roles played by the user manual is to help in solving problems with Avital 4000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Avital 4000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
