Instruction/ maintenance manual of the product 113.23611 Sears
Go to page of 20
Save This: Manual For Future Reference MODEL NO. 113.236!10 SCROLL SAW ! Serial Number Model and serial number may be found attached to the underside of the worktable.
_ : ,::_ :::/, . - ) : : :: : :, . SCROLL SAW .= to a defect in material or --I'SMAN SCROLL SAW TO THE N EAREST tN THE UNITED STATES. also have other rights which vary from state to Seam Tower; BSC 41-3, Chicago, fill®is 60884 general safety instructions for power teems 1.
additionaJ safety instructions for scroll saw Safety is a combination of operator common sense and altert- ness at all times when the scroll saw is being used, WARNING: FOR YOUR OWN SAFETY, DO NOT ATTEMPT TO OPERATE YOUR SCROLL St_' UNTIL IT IS COMPLETELY ASSEMBLED AND iNSTALLED ACCORDING TO THE INSTRUCTIONS.
CONNECTING:'I_ POWER SUPPLY:OUTLET i.... tf power:cord is worn or Cut, or damaged:in :any way, have it :replaced immediately. WARNING: IF NOT PROPERLY GROUNDED THIS POWER TOOL CAN CAUSE AN ELECTRICAL SHOCK PARTICULARLY WHEN USED !N DAMP LOCATIONS CLOSE TO PLUMBING.
unpacking and checking contents TOOLS NEEDED COMBINATION SQUARE MEDIUM PHILLIPS SCREWDRIVER COMBINATION SQUARE MUST BE TRUE STRAtGHT EDGE OF BOARD 3t4" THICK DRAW LIGHT EDGE MUST BE LINE ON BOARD.
TIONAL INSTRUCTIONS. the frame and base and place scroll saw on work:bench: 2. FamiliariZe yourself with the controls and features of this scroll saw indicated in the il]usVation.
2. A bevel scale is provided under the work table as a conve- nient reference for setting the approximate table angle for bevel cutting. When greater precision is required, make practice cuts and adjust the table as necessary for your requirements. • • _••• •i; ¸ :•• •• • TO ALIGN THE BEVEL INDICATOR 1.
minil : =: : The / ,J_ i ' ' 4; Loosen the screw holding the bevel scale pointer and adjust ; pointer to 0 degrees, Tighten screw, Remember. the bevel scale is a convenient guide but should :not be relied upon for precision. _ : Make practic_e cuts in scrap wood to determine if your angle _-___I _ settings are correct.
removing and installing bmades WARNING: TO AVOID INJURY FROM ACCIDENTAL STARTING, ALWAYS TURN SWITCH "OFF" AND REMOVE SWITCH KEY BEFORE REMOVING OR REPLACING THE BLADE. 1_ Loosen tension on blade by turning tension knob counter- clockwise _ about two full turns.
: 4,1_ Locate theblade guard and carefully install it onto the saw ughti_ sp_a_ a_art the b_ad_ guard so p_ns w,tgo _ .to holes in:frame:.; _ E _i : 5. In order to cut, and to avoid uncontrollable lilting of the work piece, the teeth of the blades used on the scroll saw should always point downward when installed on the scroll saw.
mounting the scroll saw to 1, When mounting this saw to a workbench a so,lid wood bench is preferred over a plywood bench where noise and vibration wilt be more noticeable.
your scrollsaw i 1. TENSION KNOB % 2. BLADE HOLDER 3. BLADE GUARD / 4. AUXILLtARY HOLES 5, ON-OFF SWITCH 8. BEVEL SCALE i BEVEL PO|NTER 1; TENSION KNOe:;;Tightening the knob(clockwise) will increase the tension on the blade.-LoOsening it (counterclockwise) will decrease the tension.
13. To turn machine on, place finger under switch lever and pull end of switch ouL C. To turn machine OFF_.PUSH lever in. NEVER LEAVE THE MACHINE UNATTENDED UNTIL IT HAS COME TO A COMPLETE STOP, O D. To lock switch in OFF position.., hold switch IN with one hand,.
you_ scrou: saw before attempting to use the saw. 4; "There is a learning curve for each person who wants to use this saw. During that period of time it is expected that some bladeswill break until you learn how to use the saw and receive the greatest benefit from the blades: 5.
MOUNTING AN AUXILLIARY WORK TABLE 1. Four holes are provided in the work tabte so you can easily attach an auxiiliary work surface to the saw if your needs require.
SWITCH FROM POWER OR LUBRI- An occasional coat of paste wax on the work table will:allow the wood being CuttO glide smoothly across the work surface. MOTOR if the power cord is worn, cut, o_ damaged in any way, have it replaced immediately. Do not attempt to oil the motor bearings or service the motor internal parts.
diagram BLACK wHITE .... GREEN: .... SWITCH ,, recommended accessories Item Sears Number Leg Set 9-22244 Blades See Catalog--For 5" long, pin end type blades 9-26873--medium radius cuts in wood u.
PAroS LIST FOR CRAFTSMAN 16-iNCH MOTORIZED SCROLL SAW ":++• .......... MODEL NO. 1;13.2 36110 Always: order by Part Nurn bet---Not ..... by Key Number ::: Key ¸¸ :No; i := : I++ ' 66055 ,+Motor(includes Switch & Cord) i 1 66066 Housing Asm; (includes Key No.
PARTS LIST FOR CRAFTSMAN 16-INCH MOTORIZED SCROLL SAW MODEL NO, 113,236!10 53 52 , 48 26 13 36 35 3E i " 39 4 _20 19.
RVlCE MODEL NO. 113.236110 SCROLL SAW HOW TO ORDER REPAIR PARTS 16 INCH SCROLL Now that you have purchased your Scroll Saw should a need ever exist for repair parts or service, simply contact any Sears Service Center and most Sears, Roebuck and Co. stores.
An important point after buying a device Sears 113.23611 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears 113.23611 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears 113.23611 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears 113.23611 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears 113.23611 will certainly help you make a decision on the purchase.
If you already are a holder of Sears 113.23611, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears 113.23611.
However, one of the most important roles played by the user manual is to help in solving problems with Sears 113.23611. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears 113.23611 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
