Instruction/ maintenance manual of the product X20WG-Naga Sceptre Technologies
Go to page of 24
X20 W G - Naga User ’ s Manual.
i FCC Compliance Statement This device complies with part 15 of t he FCC Rules. Operation is subject to the following two conditions: 1. This device may not caus e harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
ii To comply with the limits for an F CC Class B computing device, always use the shielded signal cord supplied with this unit. The Federal Communications Commission warns that changes or modifications of the unit not expre ssly approved by the party responsible for compliance could void the user ’s authority to operate the equipment.
iii T ABLE OF C ONTENTS TABLE OF CO NTENTS .......................................................................................... III Your New LCD Monitor 1 Unpacking 1 Identifying Components 3 Ad.
1 Rev.3 The LCD Monitor Your New LCD Monitor Your LCD Monitor has been desi gned to be versatile, ergonomic and user-friendly. The LCD Monitor is capable of displaying most standards, from 640x350 VGA to 1680x1050 WSXGA+.
2 Rev.3 Note: Using a computer for an extended period of time with a poor workstation set-up and incorrect working habits can c ause health problems. The science of ergonomics studies the relationship between health and a suitable working environment.
3 Rev.3 Identifying Components A. The LCD Monitor — Front View Figure 1-1: The LCD Monitor Front View 1. Sceptre logo Indicator This foursquare LED indicator blue lit when the power is on and red lit when the LCD monito r is in power-saving mode. 2.
4 Rev.3 B. "Hot Keys" for Quick Adjustment of Monitor Settings Figure 1-2: "Hot Keys" 1. Brightness adjustment " Hot Key ": Press this Z button to allow you to adjust the brightness of the LCD Monitor directly < > 50 2.
5 Rev.3 Adjusting the Tilting Angle The LCD Monitor’s angle settings range from 0 ° to 10 ° . 10 Figure 1-3: Tilting the Monitor 0 to 10.
6 Rev.3 Connecting AC Power and PC Video Cable Note: Turn off your PC and the LCD monitor before connecting your LCD monitor to the computer. Figure 1-4: PC conenc tion Power Management System This LCD Monitor complies with the VESA DPMS power management proposal.
7 Rev.3 How to install the detacheable stand: Please see the below drawing..
8 Rev.3 The Display Controls The LCD Monitor’s Control Panel Figure 2-1: The Control Pane l 1. Hot key button Y & Z These buttons let you to adjustment volume and brightness of the LCD Monitor directly 2.
9 Rev.3 Adjusting the Monitor’s Display OSD Main Menu 1. Pressing the OSD Menu button causes the screen below to appear. 2. Use the - & + key to select the desired group, then press Menu key to the sub-menu 3. Repeat step 2 to select the changed item, then press - & + to change the value.
10 Rev.3 Auto Adjust Option The Auto Adjust option lets the monitor determine and select the settings that are most appropriate for your system requirements.
11 Rev.3 Color -- Color Temperature Adjustment Auto Color -- To adjust automatically the white balance display. 9300 -- Sets the color temperature to 9300K 6500 -- Sets the color temperature to 6500K .
12 Rev.3 OSD – OSD Adjustment H. Position -- Moves the OSD menu horizontally V. Position -- Moves the OSD menu vertically OSD Time -- Sets the OSD time ( 0 to 60 second ) Exit -- Return to the previ.
13 Rev.3 Miscellaneous Input selection -- To switch between analog and DVI port for PC signal input Sharpness -- The sharpness value can be set at 1. 2.
14 Rev.3 Note: 1) No signal detected When the monitor is ON and there is no video signal received, the following message will be displayed No signal detected! 2) Signal out of range When the frequency.
15 Rev.3 Appendix A TFT LCD Monitor Specifications Item Specification LCD Panel 20.1" WSXGA+ Control Functions Power Software Power switch with LED indicator (ON/OFF) Main Menu Submenu Auto adjust Luminance Brightness/Contrast/ /Exit Geometry H.Position/V.
16 Rev.3 Video Interface VGA Compatible Analog RGB DVI compatible signal Scanning Frequency H/V, Hz 31K-80K 60-75 P ow er Management M ee ts VESA DPMS Power Consumption (ON/OFF, W) 45W/1W Max. Dimensions WxHxD 18.72 x 16.14 x 6.89 in. (475.4 x 410 x 175mm) Net Weight (approx.
17 Rev.3 Appendix B Supported PC Timing Item Standards Resolution Dot Clock (MHz) Vertical Scanning Frequency (Hz) Horizontal Scanning Frequency (kHz) 1 DOS 720x400 28.32 70.08 31.47 2 DOS 640x480 25.18 59.94 31.47 3 Macintosh 640x480 30.24 67.00 35.00 4 VESA 640x480 31.
18 Rev.3 Supported Video mode Item Standards Vertical Scanning Frequency (Hz) Horizontal Scanning Frequency (kHz) 1 720x480i 29.97 15.73 2 720x480P 59.
19 Rev.3 Appendix C Troubleshooting This LCD monitor comes pre-adjusted with standard VGA timing. Due to output timing differences among various VGA cards, you may initially experience an unstable or unclear disp lay when a new display mode or new VGA card is selected.
20 Rev.3 PC’s VGA card may be out of the LCD’s synchronous range. Change to one of the alternate m odes listed in Appendix B, or replace the VGA card and repeat steps 1 and 2. 4. If the power LED is not lit, check that the AC power connector is securely connected, and verify that the AC adapter LED is lit.
An important point after buying a device Sceptre Technologies X20WG-Naga (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sceptre Technologies X20WG-Naga yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sceptre Technologies X20WG-Naga - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sceptre Technologies X20WG-Naga you will learn all the available features of the product, as well as information on its operation. The information that you get Sceptre Technologies X20WG-Naga will certainly help you make a decision on the purchase.
If you already are a holder of Sceptre Technologies X20WG-Naga, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sceptre Technologies X20WG-Naga.
However, one of the most important roles played by the user manual is to help in solving problems with Sceptre Technologies X20WG-Naga. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sceptre Technologies X20WG-Naga along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
