Instruction/ maintenance manual of the product DC-TS750 Sanyo
Go to page of 28
INSTRUCTION MANUAL DVD Home Theatr e System DC-TS750 REMOTE CONTROLLER RB-TS750ST.
1 PRECAUTIONS CAUTION THIS PRODUCT CONTAINS A LOW POWER LASER DEVICE, TO ENSURE CONTINUED SAFETY DO NOT REMOVE ANY COVERS OR ATTEMPT TO GAIN ACCESS TO THE INSIDE OF THE PRODUCT. REFER ALL SERVICING TO QUALIFIED PERSONNEL. The unit is not disconnected from the mains unless it is unplugged from the AC outlet.
2 CONTROLS 2 3 1 9 8 7 5 6 4 10 1. Disc tray 2. Remote sensor (IR) 3. Display 4. Power button/Standby indicator ( z /ON, STANDBY) 5. Headphones socket (PHONES) 6. Volume control (VOLUME) 7. Function button (FUNCTION) 8. Play button ( a ) 9. Stop button ( n ) 10.
3 REMOTE CONTROL Note: In this instruction manual, any operation of pressing any button while pressing the SHIFT button is as shown below. Example: “Press the SHIFT + 1 ANGLE buttons.” Controls 1. Power button ( z /ON) 2. Number and other function buttons Number buttons (1 - 9, 0) Angle button (ANGLE) Angle replay button (A.
4 BASIC CONNECTIONS After all connections have been made, connect the mains lead to an AC outlet . Note: - Do not connect the mains lead to an AC outlet until all connections have been made. - The system is not completely disconnected from the mains when the z /ON button is set to the z position.
5 Speaker placement Example: To hang the speaker on a wall Example: To mount the speaker with a stand Approx. 3 mm Stand (not supplied) Screw (supplied) Built-in special nut, 3/16 inch diameter Round .
6 Connecting to a TV with the video lead Connect the video lead between the MONITOR OUT VIDEO socket of the unit and the video input socket of the TV. VIDEO (AUDIO) IN EXT.
7 VIDEO (AUDIO) IN EXT.ANT FM75 Ω AM LOOP ANT RL VIDEO S-VIDEO MONITOR OUT FRONT/CENTER/SURROUND: 8 Ω SUBWOOFER: 4 Ω SPEAKERS RR LL CENTER SUB WOOFER FRONT SURROUND AV EURO / TV(AUDIO)IN (RGB OU.
8 SYSTEM CONNECTIONS EXAMPLES VIDEO (AUDIO) IN EXT.ANT FM75 Ω AM LOOP ANT RL VIDEO S-VIDEO MONITOR OUT FRONT/CE N SUBWOO F S RR L CENTER FRONT SURRO AV EURO / TV(AUDIO)IN (RGB OUT) VIDEO OUT SELECT RGB S-VIDEO AUDIO OUT R L IN OUT AV AERIAL AERIAL IN VIDEO (AUDIO) IN EXT.
9 VIDEO (AUDIO) IN EXT.ANT FM75 Ω AM LOOP ANT RL VIDEO S-VIDEO MONITOR OUT FRONT/CENTER/SURROUND: 8 Ω SUBWOOFER: 4 Ω SPEAKERS RR LL CENTER SUB WOOFER FRONT SURROUND AV EURO / TV(AUDIO)IN (RGB OUT) VIDEO OUT SELECT RGB S-VIDEO AUDIO OUT R L IN OUT OUT IN/OUT AUDIO OUT R L IN OUT AV AERIAL AERIAL AV AERIAL IN VIDEO (AUDIO) IN EXT.
10 BEFORE OPERA TION Turning the power on and off Press the z /ON button. The STANDBY indicator goes out. (After connecting the mains lead, when you press the z /ON button for the first time, the volume-reset feature automatically sets the initial volume level.
11 Selecting surround mode Press the SURROUND button to select the surround mode. Each time the button is pressed, the surround mode changes as follows: AUTO v SURR ON v 2CH MODE v AUTO . . . When “DVD/CD” function is selected AUTO The unit selects the surround mode automatically depending on the disc.
12 PLA Y ABLE DISCS The following types of discs can be played on this unit. Region number Region number (Regional restriction code) is built-in to the unit and DVD discs. There is a region number on the rear of the unit. The same region number or region number “ALL” of DVD discs can be used on this unit.
13 3. Press the OPEN/CLOSE button again. - The disc tray closes and “READING” appears on the display. Note: Some discs may start play automatically. Starting play Press the a button. The DVD/CD function is selected and play starts automatically. Example: Note: If “NO DISC” appears on the display, load the disc.
14 V ARIOUS DISC PLA YING FUNCTIONS “ ” may appear on the TV screen during operation. This icon means that the function is not available on the disc now. Selecting a DVD menu [DVD] 1. Press the MENU button. The main menu screen appears. Note: Press the MENU button again to resume play.
15 Picture zoom [DVD] 1. Press the SHIFT + 3 ZOOM buttons during normal, slow or still play. The central part of the picture is magnified. - Each time the button is pressed, the zoom mode changes as follows. 1 v 2 v Off - Press the 4 , a , 5 or b button to change the zoom point.
16 Selecting subtitle language [DVD] This operation works only with discs on which multiple subtitle languages are recorded. 1. Press the S.T.ON/OFF button during play. “ ” appears on the screen. 2. Press the S.T.CH button repeatedly until the desired subtitle language appears on the screen.
17 MP3 CD OPERA TION This unit can play back the CD-R/RW that have recorded music data or MP3 files. Before playing back MP3 CD, please read the following. MP3 CD information Limitations on MP3 CD play - MP3 CD is the disc that standardized by ISO9660 Level 2.
18 INITIAL SETTINGS Once the initial settings have been completed, the unit can always be operated under the same conditions. The settings will be retained in the memory until they are changed, even if the power is turned off. Setting language 1. Press the SETUP button in the stop mode.
19 Setting audio The sound from speakers can reach the listening position at different times depending on the speaker placements. You can allow for this difference by changing the delay time of the centre and surround speakers. You also can change the dynamic range control (DRC).
20 LANGUAGE CODE LIST 6565 aa Afar 6566 ab Abkhazian 6570 af Afrikaans 6577 am Amharic 6582 ar Arabic 6583 as Assamese 6589 ay Aymara 6590 az Azerbaijani 6665 ba Bashkir 6669 be Byelorussian 6671 bg B.
21 To turn the unit on and listen to the last received station, press the TUNE/BAND button. Automatic/Manual tuning 1. Press the TUNE/BAND button to select FM or AM. 2. Automatic tuning Press the TUNE/PTY + or – button for at least 1 second to tune in a station.
22 To search a preset station by PTY codes A particular programme type broadcast can be located by specifying the PTY codes. 1. Press the RDS button to select “PTY” while listening to an FM broadcast. 2. Press the TUNE/PTY + or – button within 2 seconds to select the desired PTY code.
23 MAINTENANCE Cleaning the unit Clean the outside of the unit with a clean soft cloth moistened with lukewarm water. Do not use benzene, thinner or alcohol since they will mar the finish of the surfaces.
24 SPECIFICA TIONS Amplifier Main amplifier Stereo mode 26 W x 2 (at 8 ohms, 10% distortion) Dolby Digital mode 26 W x 2 (at 8 ohms, 10% distortion, with Centre/Surround/ Subwoofer amplifier off) Cent.
25.
26.
(UK) 1AD6P1P1689-B SANYO Electric Co., Ltd. GUARANTEE TO CUSTOMER Sanyo Europe Ltd. (the Company) guarantees to the initial retail purchaser that if this equipment is or becomes defective and that, in.
An important point after buying a device Sanyo DC-TS750 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo DC-TS750 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo DC-TS750 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo DC-TS750 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo DC-TS750 will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo DC-TS750, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo DC-TS750.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo DC-TS750. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo DC-TS750 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
