Instruction/ maintenance manual of the product DC-MX30 Sanyo
Go to page of 17
INSTRUCTION MANUAL DC-MX30 MICRO Hi-Fi SYSTEM.
1 C O N T E N T S P A G E IMPORT ANT SAFETY INFORMA TION……………………… ……………………………………………2 HEARING IMPORT ANT NOTE………………………………………………………… ………………….
2 IMPORT ANT SAFETY INFORMA TION REMA RK: In case of malfunction due to electrostatic disc harge or fast transient (Burst), just reset the product (reconnect of power source may be re quired) to resume normal operation. z Keep this unit away from dripping or splashing water .
3 Note: z This unit will become warm when used for a long period of time. It’s a normal phenomenon. Don’t worry about it. z This CD player includes microprocessors, whic h may malfunction as a result of external electrical interference or noise. If the CD is not working properl y , disconnect the power source and then reconnect it.
4 LOCA TION OF CONTRO LS AND FUNCTIONS MAIN UNIT 1. Power Indicator 2. REMOTE Sensor 3. BA SS XP ANDER Indicator 4. DISPLA Y 5. FM ST Indicator 6. +VOLUME- Control 7. TUNING Control 8. Dial Pointer 9. PLA Y / P AUSE Button 10. Button 11. Button 12. PROGRAM Button 13.
5 Remote Control 35. PLA Y/ P AUSE Button 36. STOP Button 37. F. F. B u t t o n 38. F .R Button 39. PLA Y MODE Button 40. FOLDER - Button 41. FOLDER + Button 42. PROGRAM Note: The distance between the remote control and the main unit should not be too far .
6 SETTING UP AND CONNECTING THE UNIT Replacing batter y of the remote contr ol 1. Squeeze the notched tab A while pulling the battery door latch B out to take the battery holder out. 2. Insert a “CR2025” 3V lithium battery . Make sure the polarity (the + and – side of the battery) is correct.
7 1. Unwind the AC Power Cord completel y . 2. Insert the plug into any convenient AC outlet. 3. As soon as the unit has been connected with the mains voltage, part s of the unit are in operation due to the standby function. T urn of f the unit completely before pulling the mains plug out of the AC outlet.
8 COMP ACT DISC OPERA TION Notes when operating the CD disc z Only press the CD Door Open but ton to open the CD door . z T o remove the di sc, hold it by the edges and remove from the holder . Loading Compact Disc 1. Slide the FUNCTION selector to CD position.
9 If necessary , press the PLA Y/P A USE button to begin playback. The player will randomly select a track to play from the disc. Note: In program mode, Random playback can’t be selected. Clear play mode Press the PLA Y MODE button fourth times to cancel the play mode and norm al playback will resume.
10 IMPORT ANT NOTE FOR MP3/CD PLA YBACK CA P A BILITY Because of none-standardized format definiti on / production of MP3 / CD, playback quality & performance are not guaranteed. SANYO is not responsible for the playability of MP3 in any case due to recording conditions such as PC performance, writing software, media ability and etc.
11 CASSETTE RECORDER OPERA TION Checking the Cassette Make sure that the cassette tape has on slack bef ore inserting it to cassette compartment. If the tape slacks, the trouble may result when you play the tape, use a pencil as shown to take up slack on one of the reels.
12 3. Insert a blank tape with exposed side downwards and full spool to the left side into cassette compartment and close cassette door . 4. Press the RECORD button to start recording 5. Press the STOP/EJECT button to stop recording and the CD will be change to pause mode, press the RECORD button to continue rec ording.
13 Compact Discs Maintenance z T reat the disc carefully . Handle th e disc only by its edge. Never allow your fingers to contact with the shiny , unprinted side of the disc. z Do not attach adhesive tape, stickers etc., to the disc label. z Clean the disc periodically with a soft, lint-free, dry cloth.
14 TROUBLESHOOTING GUIDE If you experience any difficulties in operating this uni t, please take the time to read the hints and tips shown in the troubleshooting guide below.
15 SPECIFICA TIONS Radio Section Frequency Range ------ --------------- ----------- AM (Built-in ferrite bar): 530 – 160 0 KHz FM (wire antenna): 88 – 108 MHz CD / MP3 Player Playback System -----.
SANYO Electric C o., Ltd. Made in China CODE NO: 172-G401043010-OSY.
An important point after buying a device Sanyo DC-MX30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo DC-MX30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo DC-MX30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo DC-MX30 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo DC-MX30 will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo DC-MX30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo DC-MX30.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo DC-MX30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo DC-MX30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
