Instruction/ maintenance manual of the product DT-200V Sangean Electronics
Go to page of 12
.
1 . On/Off Button 2 . V olume Control 3 . Earphone Jack 4 . Lcd Ddisplay 5 . T uning Control 6 . T uning Control 7. Band Selection Button 8. Mono/Stereo Button 9. Memory Button 10. Select Button 1 1. Spea ker On/Off Switch 12. Battery Compartment 13. Lock Switch 14.
3 2 3 1 5 6 7 8 13 4 11 9 10.
4 14 12.
The battery cover is located on the back of the unit. Slide the cover in the direction of the arrow to gain access to the battery compartment(12). Insert 2 AA batteries into the compartment(12). Make sure that the batteries are positioned in accordance with the diagram located below batteries in battery com- partment.
Adjust the V olume Control(2) by rotating clockwise to increase V olume. ANTENNA/EARPHONE USE The cord connecting the headphones to the re- ceiver acts as an antenna during FM/TV reception and should be extended as much as possible to increase FM/TV sensitivity .
AM 520-1710KHZ Internal/Rotate radio for best reception FM 87.5-108MHZ External/Make sure Head- phones are inserted into Headphone Jack TV ch.2-13(VHF) External/Make sure Head- phones are inserted into Headphone Jack TUNING THE RADIO BAND FREQUENCY ANTENNA A SCAN TUNNING Turn on the Radion by pressing On/Of f Button (1).
B MANUAL TUNING Turn on the Radio by pressing On/Of f Button (1). Select AM,FM or TV Band by pressing Band Selection Button (7).Desired station May be selected by either pressing the Tuning Control(5)or(6) intermittently until the desired Station is reached or pressing and holding the Tuning Control until the desired station is Reached.
In the LCD Display. Y ou may store a total of 19 stations in any mix from any band.Original stations are eliminated when new stations are selected to take their places. D MEMORY TUNING (ST A TION RECALL) Turn on the Radio by pressing On/Of f Button (1).
To prevent accidental changing of any o the radio settings move the Lock Switch (13)to its up , locked position( ). T o release simply move the switch to its down position. IT IS IMPORT ANT TO MAKE SURE LOCK SWITCH IS IN ITS DOWN POSITION WHEN RADIO IS T O BE USED AS RADIO IS COMPLETEL Y INOPERA TIVE UNTIL LOCK SWITCH IS RELEASED .
T ype: FM-Stereo(Via headphones) AM Standard(mono) TV Band (mono, CH. 2-13VHF) Earphone Jack: 3.5mm mini-plug 32 ohm impedance (stereo) Output Power: 60mW(10%THD) V ia built-in speaker 32 ohm impedanc.
1.Keep the radio dry. If it does get wet, wipe it immediately . Liquids may contain chemicals that can corrode electronic circuitry. 2.Use and store your radio only in normal temperature environments. High temperature can shorten the life of electronic devices, damage batteries and melt plastic parts.
An important point after buying a device Sangean Electronics DT-200V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sangean Electronics DT-200V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sangean Electronics DT-200V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sangean Electronics DT-200V you will learn all the available features of the product, as well as information on its operation. The information that you get Sangean Electronics DT-200V will certainly help you make a decision on the purchase.
If you already are a holder of Sangean Electronics DT-200V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sangean Electronics DT-200V.
However, one of the most important roles played by the user manual is to help in solving problems with Sangean Electronics DT-200V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sangean Electronics DT-200V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
