Instruction/ maintenance manual of the product SMT-170MP Samsung
Go to page of 20
TFT -LCD MONIT OR SMT -170MN SMT -170MP User Guide.
Eng-2 Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Eng-3 IMPOR T ANT SAFEGUARDS Caution Power source is indicated on the rear of the set. It contains high-voltage parts. If you remove the cover, it may cause fire or electric shock. Do not remove the cover by yourself. (Control switches are at the front of the monitor.
Eng-4 8. Accessories : Do not place this monitor on an unstable cart, stand, tripod, bracket, or table. The monitor may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod. bracket, or table recommended by Samsung, or sold with the monitor.
Eng-5 13. Lightning : For added protection for this monitor during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the monitor due to lightning and power-line surges.
Eng-6 18. Replacement Parts : When replacement parts are required, be sure the service technician has used replacement parts specified by Samsung or have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards.
Eng-7 Information to user Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
Eng-8 The party responsible for product compliance: SAMSUNG ELECTRONICS CO., LTD. America QA Lab of Samsung 3351 Michelson Drive, Suite #290, Irvine, CA92612 USA IC Compliance Notice This Class (A) digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Eng-9 Contents IMPORTANT SAFEGUARDS........................................ e-3 FCC & ICES Information ................................................. e-6 Unpacking....................................................................... e-10 Names and Functions of Parts .
Eng-10 Unpacking Remove the package cover and place the product on a flat and secure surface or in the installation location. Check whether all the following devices and accessories are included with the main system.
Eng-11 Names and Functions of Parts Front Panel A. Auto Use this button to auto adjustment direct access. B. Exit Use this button to Exit the active menu or the OSD.
Eng-12 Remote Control A. POWER SAVE Changes to Power Save mode. B. ONEAF Performs Auto Focus for the selected camera once in the present status. Only the remote control has this button. It is only available when a camera (SOC-420(P), or SOC- 920(P), sold separately) is connected with the product.
Eng-13 K. TALK Communicates with the doorbell in duplex mode. L. Number Key(0 ~ 9) Press the number of the channel to watch it in full screen mode. Or, press the SYSTEM ID button and then press the number of the system you want to control with the remote control.
Eng-14 Rear Panel A. 14V DC Connect the power cord for your monitor to the power port on the back of the monitor. B. SIGNAL (RJ-45) MUX input port. C. DVR DVR input terminals.
DVR MUX Box Power Connecting to External Devices The product can be connected to an external device such as a MUX Box, DVR, etc. Eng-15.
Eng-16 Attaching a Base Attaching a base NOTE: This monitor accepts a 75mm x 75mm VESA-compliant mounting interface pad. Squeeze the folded monitor stand into the VESA mounting bracket. Then fasten it using the four supplied nuts with the monitor, mounting pad and VESA mounting bracket aligned.
Appendix Specifications 1. Model Name 2. Size 3. Display area 4. Pixel pitch 5. Type 6. Viewing Angle 7. Power Supply 8. Power Consumption 9. Dimensions (WxDxH) 10. Weight 11. Environmental Considerations 12. DVR mode SMT-170MN/SMT-170MP 17.0 inch diagonal 337.
Eng-18 Memo.
Eng-19 Memo.
Part No.: AA68-03107A-00 Printed in Korea.
An important point after buying a device Samsung SMT-170MP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SMT-170MP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SMT-170MP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SMT-170MP you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SMT-170MP will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SMT-170MP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SMT-170MP.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SMT-170MP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SMT-170MP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
