Instruction/ maintenance manual of the product SMC-211FN Samsung
Go to page of 19
COLOR MONIT OR SMC-21 1FN / SMC-21 1FP User Guide Mode d’emploi Guía del usuario êìäéÇéÑëíÇé èé ùäëèãìÄíÄñàà Manuale dell'utente Bedienungsanleitung.
IMPOR T ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
English-3 Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
English-4 IMPOR T ANT SAFEGUARDS Caution Power source is indicated on the rear of the set. It contains high-voltage parts. If you remove the cover, it may cause fire or electric shock. Do not remove the cover by yourself. (Control switches are at the front of the monitor.
English-5 8. Accessories : Do not place this monitor on an unstable cart, stand, tripod, bracket or table. The monitor may fall, causing serious injury to a child or adult and serious damage to the appliance. Use only with a cart, stand, tripod. bracket or table recommended by Samsung or sold with the monitor.
English-6 13. Lightning : For added protection for this monitor during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the monitor due to lightning and power-line surges.
English-7 18. Replacement Parts : When replacement parts are required, be sure the service technician has used replacement parts specified by Samsung or have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards.
English-8 Information to user Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
English-9 The party responsible for product compliance: SAMSUNG ELECTRONICS CO., LTD. America QA Lab of Samsung 3351 Michelson Drive, Suite #290, Irvine, CA92612 USA IC Compliance Notice This Class (A) digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
English-10 Contents IMPORTANT SAFETY INSTRUCTIONS ...........English-2 IMPORTANT SAFEGUARDS ..............................English-4 FCC information .....................................................English-7 Front Panel Components and Controls ....
English-11 SMC-211F Fr ont Panel Components and Controls SMC-21 1F Using buttons on the front panel Power Switch On/off switch. If you press this button, the monitor is turned on and the LED of selected input signal is lit. VIDEO Input Selection Switch It selects video and audio input signal.
CONTRAST Switch This control adjusts the contrast of the screen image. Press CONTRAST switch and then VOLUME(DATA) switch to control the contrast. BRIGHT Switch This control adjusts the bright of the screen image. Press BRIGHT switch and then VOLUME(DATA) switch to control the bright.
English-13 Settings Range of Each Button Explanation To select a specific Contrast within the setting range. To select a specific Brightness within the setting range. To select a specific Sharpness within the setting range. To select a specific Color within the setting range.
Default values of the PRESET settings are : English-14 Default setting 60 50 50 50 Green 50, Red 50 English Preset Contrast Brightness Sharpness Color Tint (NTSC) Language (depending on the model).
English-15 Rear Panel Components and Contr ols VIDEO A (IN) / VIDEO B (IN) This is connector for inputting Video signals. VIDEO A (OUT) / VIDEO B (OUT) This is connector for outputting Video signals. S-VIDEO IN This is S-VIDEO input connector. AUDIO A (IN) / AUDIO B (IN) This is connector for inputting audio signals.
English-16 Connections Camera A Camera B TimeLaps VCR SMC-21 1F.
English-17 Maintenance If the quality of the picture on the COLOR MONITOR is poor and cannot be improved, inspect all system connections and cable runs. Repairs should be performed by a qualified technician with adequate test equipment and facilities.
English-18 Specifications SMC-211FPV / SMC-211FNV (NTSC/PAL) 21” diagonal, 0.74 stripe pitch, 90° deflection 2 Channel Input/2 Channel Ouput S-Video INPUT 1.
Part No.: AA68-03477A-00 Printed in Korea.
An important point after buying a device Samsung SMC-211FN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SMC-211FN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SMC-211FN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SMC-211FN you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SMC-211FN will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SMC-211FN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SMC-211FN.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SMC-211FN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SMC-211FN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
