Instruction/ maintenance manual of the product S27C570H Samsung
Go to page of 100
User Manual S22C570H S23C570H S24C570HL The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Cont ents 2 Table Of Contents BEFORE USING THE PRODUCT 7 Copyright 7 Icons used in this manual 8 Cleaning 8 Cleaning 9 Securing the Installation Space 9 Precautions for storage 10 Safety Prec.
Table Of Contents Table Of Cont ents 3 31 Connecting and Using a PC 31 Connection Using the D-SUB Cable (Analog Type) 32 Connection Using an HDMI Cable 32 Connection Using an HDMI-DVI Cable 33 Connect.
Table Of Contents Table Of Cont ents 4 53 Fine 53 Adjusting Fine CONFIGURING TINT 54 Red 54 Configuring Red 55 Green 55 Configuring Green 56 Blue 56 Configuring Blue 57 Color Tone 57 Configuring the C.
Table Of Contents Table Of Cont ents 5 66 Turn Off After 66 Configuring Turn Off After 67 PC/AV Mode 67 Configuring PC/AV Mode 68 Key Repeat Time 68 Configuring Key Repeat Time 69 Source Detection 69 .
Table Of Contents Table Of Cont ents 6 SPECIFICATIONS 83 General 85 PowerSaver 86 Standard Signal Mode Table APPENDIX 88 Contact SAMSUNG WORLD WIDE 94 Responsibility for the Pay Service (Cost to Custo.
7 Before Using the Product Before Using the Product Copyright The content s of this man ual are sub ject to chang e without n otice to im prove qual ity.
8 Before Using the Product Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and e xterior of ad vanced LCDs ar e easily scratche d. Take the following steps when c leaning. 1. Power off the monitor and computer . 2. Disconnect the power c ord from th e monitor.
9 Before Using the Product Before Using the Product Securing the Installation Space Ensure some space aroun d the prod uct for ven tilation. An inte rnal tempe rature rise m ay cause fire and damage the produc t. Be sure t o allow the amount of sp ace as sho wn below o r greater w hen installing the prod uct.
10 Before Using the Product Before Using the Product Safety Precautions Symbols for safety precautions Cautio n RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: TO REDU CE THE RISK OF ELECTRIC SHO CK, DO NOT REMOVE CO VER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE.
11 Before Using the Product Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damage d power cor d or plug, o r a loos e power s ocket.
12 Before Using the Product Before Using the Product Caution Installation and Safety Warning Do not unplug the power cor d when the p roduct is in us e. The product may become damaged by an electric shock. Do not use the po wer cord for pr oducts other th an authorized pr oducts supp lied by Samsung.
13 Before Using the Product Before Using the Product Caution Do not install t he product on an unst able or vibr ating surfac e (insecure shelf, sloped surfa ce, etc.). The product m ay fall and brea k or cause a personal injury. Using the produ ct in an area w ith excess vibr ation may dama ge the prod uct or cause a fire.
14 Before Using the Product Before Using the Product Operation Warning Put down the p roduct carefully. The product m ay fall and brea k or cause a personal injury.
15 Before Using the Product Before Using the Product During a light ning or thunde rstorm, powe r off the produ ct and remo ve the power cable. An electric shock or fire may re sult. Do not drop objects on the pr oduct or apply impact. An electric shock or fire may re sult.
16 Before Using the Product Before Using the Product Caution Leaving the screen fixed on a stationary im age for an extended per iod of time may cause a fterimage burn-in or defectiv e pixels. If you are no t going to u se the pro duct for an extended p eriod of t ime, activate power-saving mode or a moving-pi cture screen saver.
17 Before Using the Product Before Using the Product Do not hold the monitor upside-down or move it by holding the stand. The product m ay fall and brea k or cause a personal injury. Do not use humidifi ers or stoves arou nd the produc t. An electric shock or fire may re sult.
18 Before Using the Product Before Using the Product Correct posture to use the product Use the product in the correct p osture as follow s: Straighten your back. Allow a distan ce of 45 to 50 cm between you r eye and the s creen, and look slightly downward at the scree n.
19 1 Preparations 1 Preparations 1.1 Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging b ox. Be careful not t o damage the prod uct when you open t he packaging with a sharp instrum ent. 2 Remove the sty rofoam fr om the prod uct.
20 Preparations 1 1 Preparations 1.1.2 Checking the Components Contact the dealer where you purchased the product if any components are missing. The appearance of the components may differ from the images shown. Components Components may vary depending on the country.
21 Preparations 1 1 Preparations 1.2 Parts 1.2.1 Frontal Button The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Icons Description JOG Button Multi directional bu tton that help s navigate.
22 Preparations 1 1 Preparations 1.2.2 Direct Key guide For guidance on shor tcut keys, the below OSD (On Screen Display) will be disp layed if you move the JOG button in any direction. Models with sound option UP/DOWN: Adjust Brightness . LEFT/RIGHT: Adjust Volume .
23 Preparations 1 1 Preparations 1.2.3 Function Key Guide To enter the m ain men u or to use other items, p ress the JOG b utton to display the Fun ction Key Guide. You can exit by pressing the JOG bu tton again. UP/DOWN/LEFT/RIGHT: Move to the item you want.
24 Preparations 1 1 Preparations Actual models because of functional variation, Function key guide options will be different. Please run the corresponding function based on the actual icon and description.
25 Preparations 1 1 Preparations 1.2.4 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Descriptio n Connect to th e DC power ad apter. Connect to a source de vice using an HDMI cable.
26 Preparations 1 1 Preparations 1.3 Installation 1.3.1 Attaching the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the stand neck into the stand base in the direction shown in the figure.
27 Preparations 1 1 Preparations 1.3.2 Removing the Stand Place a soft clo th over the tabl e to protect th e product and place the product onto the cloth so that the front of the product faces downwards.
28 Preparations 1 1 Preparations 1.3.3 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. You can adjust the tilt of your monitor. Hold the lower part of the product and adjust the tilt carefully.
29 Preparations 1 1 Preparations 1.3.4 Anti-theft Lock An anti-theft lo ck allows you to use the produ ct securely even in public places. The locking d evice shape and lock ing method de pend on t he manufa cturer. Refer to the use r guide provided with your anti-the ft locking device for de tails.
30 2 Connecting and Us ing a Source Device 2 Connecting and Using a Source Device 2.1 Before Connecting 2.1.1 Pre-connection Checkpoints Before connectin g a source d evice, read th e user manu al provided with it. The number and locations of ports o n source de vices may diffe r from de vice to devic e.
31 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3 Connecting and Using a PC Select a connect ion method suitab le for your PC. Connecting parts may differ in different products. 2.3.1 Connection Using the D-SUB Cable (A nalog Type) Do not connect the power cable before connecting all other cables.
32 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3.2 Connection Usin g an HDMI Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable.
33 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3.4 Connecting to H eadphones or Speakers Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable.
34 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3.6 Changing the sound settings on Windows Control Panel Audio Speaker Speaker Setup → → → 1 2 3 4.
35 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3.7 Driver Installation You can set the optimum resolution and frequency for this product by installing the corresponding drivers. An installation driver is contained on the CD supplied with the product.
36 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3.8 Setting Optimum Resolution An information message abou t setting optimum resolution will appear if you power on the product for the first time after purchase. Select a langua ge and ch ange the resolution to t he optimum v alue.
37 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3.9 Changing the Re solution Using a PC Adjust the resolution and refresh rate in Control Panel on you r PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
38 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Changing the Resolution on Windows Vista Go to Control P anel Personalization Display Settin gs and chan ge the resolution.
39 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Changing the Resolution on Windows 7 Go to Control P anel Display Screen Reso lution and change the r esoluti on.
40 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolution and chan ge the resolution.
41 3 Screen Setup 3 Screen Setup Configure the screen settings such as brightness. When configuring the screen settings, refer to th e Help bar for assistance. It is found at the bottom of the menu. 3.1 Brightness You can adjust the general bright ness of the pic ture.
42 Screen Setup 3 3 Screen Setup 3.2 Contrast Adjust the cont rast between the objects a nd backgro und. (Range: 0~100) A higher va lue will i ncrease the contrast to make the o bject appear clearer. This menu is not available when Bright is in Cinema or Dynamic Contrast mode.
43 Screen Setup 3 3 Screen Setup 3.3 Sharpness Make the ou tline of objec ts more clear or blurry. (R ange: 0~ 100) A higher va lue will mak e the outli ne of object s clearer. This menu is not available when Bright is in Cinema or Dynamic Contrast mode.
44 Screen Setup 3 3 Screen Setup 3.4 SAMSUNG MAGIC Bright This menu provides an optimum picture qu ality suitable for the enviro nment where the pr oduct will be used. This menu is unavailable when Eco Saving is set. You can customize the brigh tness to suit your preferences.
45 Screen Setup 3 3 Screen Setup that are pres et at the fa ctory. You can activate either Dynamic , Standard , Movie or Custom . You can select Custom which au tomatically reca lls your pers onalized pictu re settings. Dynamic : Select this mode to view a sharper image than in Standard mode.
46 Screen Setup 3 3 Screen Setup 3.5 SAMSUNG MAGIC Upscale Upscale functio n can enhan ce the layers o f the pictur e details and t he vividness of th e picture. The function has more obvious effects on low-resolution pictures. This menu is not available when Bright is in Cinema or Dynamic Contrast mode.
47 Screen Setup 3 3 Screen Setup 3.6 Image Size Change the pi cture size. 3.6.1 Changing the Image Size 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP. Next, press the JOG button. 2 Move to PICTURE controlling the JOG button UP/D OWN and press the JOG button.
48 Screen Setup 3 3 Screen Setup This can only be set when the external input is connected through HDMI and PC/AV Mode is set to AV . 4 Move to the desi red option controlling th e JOG button UP/DOWN an d press the JOG button. 5 The selected op tion will be ap plied.
49 Screen Setup 3 3 Screen Setup 3.7 HDMI Black Level If a DVD player or set-t op box is connected to the product via HDM I, image quality degrad ation (contra st/ color degrada tion, black level, etc.) may occur, depending on the conn ected sou rce devic e.
50 Screen Setup 3 3 Screen Setup 3.8 Response Time Accelerate th e panel response rate to make video appear more vivid a nd natural. It is best to set Response Time to Standard or Faster when you are not viewing a movie. The functions available on the monitor may vary depending on the model.
51 Screen Setup 3 3 Screen Setup 3.9 H-Position & V-Position H-Position : Move the scre en to the left or ri ght. V-Positio n : Move the sc reen up o r down. This menu is available in Analog mode. This menu is only available when Image Size is set to Screen Fit in AV Mode.
52 Screen Setup 3 3 Screen Setup 3.10 Coarse Adjust the scre en frequency. This menu is available in Analog mode only. 3.10.1 Adjusting Coarse 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP. Next, press the JOG button. 2 Move to PICTURE controlling the JOG button UP/D OWN and press the JOG button.
53 Screen Setup 3 3 Screen Setup 3.11 Fine Fine-adjust the sc reen to obt ain a vivid p icture. This menu is available in Analog mode only. 3.11.1 Adjusting Fine 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP. Next, press the JOG button.
54 4 Configuring Tint 4 Configuring Tint Adjust the tint of the screen. This menu is not available when Br ight is set to Cinema or Dynamic Contrast mode. SAMSUNG MAGIC 4.1 Red Adjust the valu e of the c olor red in th e picture. (Range: 0~1 00) A higher value wil l increase the inte nsity of the color.
55 Configuring Tint 4 4 Configuring Tint 4.2 Green Adjust the valu e of the c olor red in th e picture. (Range: 0~1 00) A higher value wil l increase the inte nsity of the color. 4.2.1 Configuring Green 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP.
56 Configuring Tint 4 4 Configuring Tint 4.3 Blue Adjust the cont rast between the objects a nd backgro und. (Range: 0~100) A higher va lue will i ncrease the contrast to make the o bject appear clearer. 4.3.1 Configuring Blue 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP.
57 Configuring Tint 4 4 Configuring Tint 4.4 Color Tone Adjust the gen eral color tone of the picture. 4.4.1 Configuring the Color Tone Settings 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP. Next, press the JOG button.
58 Configuring Tint 4 4 Configuring Tint 4.5 Gamma Adjust the mid-ra nge brig htness (Gam ma) of the p icture. 4.5.1 Configuring Gamma 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP. Next, press the JOG button. 2 Move to COLOR controlling the JO G button UP/DOW N and press the JOG but ton.
59 5 Coordi nating OSD 5 Coordinating OSD 5.1 Language Set the menu lang uage. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 5.1.1 Changing the Language 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP.
60 Coordinating OSD 5 5 Coordi nating OSD 5.2 Menu H-Position & Menu V-Position Menu H-Position : Move the menu position to th e left or right. Menu V-Position : Move the menu position up o r down. 5.2.1 Configuring Menu H- Position & Menu V-Position 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP.
61 Coordinating OSD 5 5 Coordi nating OSD 5.3 Display Time Set the on-screen disp lay (OSD) menu t o automatica lly disappear if the menu is n ot used for a sp ecified period of time. Display Time can be used to spec ify the time afte r which you wa nt the OSD m enu to disa ppear.
62 Coordinating OSD 5 5 Coordi nating OSD 5.4 Transparency Set the transp arency for th e menu w indows: 5.4.1 Changing Transparency 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP. Next, press the JOG button. 2 Move to MENU SETTINGS controlling t he JOG button UP/DOWN and pre ss the JOG but ton.
63 6 Setup and Reset 6 Setup and Reset 6.1 Reset Return all the sett ings for the p roduct to the de fault factory se ttings. 6.1.1 Initializing Settings (Reset) 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP. Next, press the JOG button.
64 Setup and Reset 6 6 Setup and Reset 6.2 Eco Saving The Eco Saving function reduces po wer consumption by controlling the electric current used by the monitor pane l. This menu is not available when Bright is in Dynamic Contrast mode. 6.2.1 Configuring Eco Savi ng 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP.
65 Setup and Reset 6 6 Setup and Reset 6.3 Off Timer You can set th e product t o automa tically turn off . 6.3.1 Configuring Off Timer 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP. Next, press the JOG button. 2 Move to SETUP&RESET controlling the JOG button UP/D OWN and press th e JOG button.
66 Setup and Reset 6 6 Setup and Reset 6.4 Turn Off After The off timer can be set within a ra nge of 1 to 23 hours. The product will au tomatically power off after the specified nu mber of h ours. This menu is available only when Off Timer is set to On .
67 Setup and Reset 6 6 Setup and Reset 6.5 PC/AV Mode Set PC/AV Mode to AV . The picture size will be enlarged. This option is useful when you view a movie. This function does not support Analog mode. Supplied for the wide models only such as 16:9 or 16:10.
68 Setup and Reset 6 6 Setup and Reset 6.6 Key Repeat Time Control the response ra te of a bu tton when the button is pressed . 6.6.1 Configuring Key Repeat Time 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP. Next, press the JOG button.
69 Setup and Reset 6 6 Setup and Reset 6.7 Source Detection You can activat e Source Detection . 6.7.1 Configuring Source Detection 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP. Next, press the JOG button. 2 Move to SETUP&RESET controlling the JOG button UP/D OWN and press th e JOG button.
70 Setup and Reset 6 6 Setup and Reset 6.8 Power LED On Configure the settings to en able or disa ble the powe r LED locat ed at the low er part o f the produc t. 6.8.1 Configuring Power LED On 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP.
71 7 INFORMATION Menu a nd Others 7 INFORMATION Menu and Others 7.1 INFORMATION View the current i nput source, frequency a nd resolutio n. 7.1.1 Displaying INFORMATION 1 When the Funct ion Key Guide appear s, select [] by moving the JOG button UP. Next, press the JOG button.
72 INFORMATION Menu and Others 7 7 INFORMATION Menu a nd Others 7.2 Configuring Brightness and Contrast in the Initial Screen Adjust the Brightness and Contrast by moving the JOG butto n when the Dir ect Key Guide is d isplayed on the scree n. 1 When you control the JOG button LEFT/R IGHT, the following screen will appear.
73 INFORMATION Menu and Others 7 7 INFORMATION Menu a nd Others 7.3 Configuring Volume in the Initial Screen Adjust the Volume by moving the J OG button wh en the Direct Key Guide is disp layed on the screen. 1 When you control the JOG button LEFT/R IGHT, the following screen will appear.
74 8 Installing the Software 8 Installing the Software 8.1 MagicTune 8.1.1 What is "MagicTune"? "MagicTune " is a software progr am that helps with mo nitor adjustme nts by providing comprehensive descriptions of monitor f unctions an d easy-to- understan d guidelines.
75 Installing the Software 8 8 Installing the Software 8.1.3 Removing the Software You can only re move "MagicTune™" th rough Add or Remove Programs in Windows. To remove "M agicTune™", co mplete the fo llowing step s. 1 Click Start select Settings , and select Control Panel from the menu.
76 Installing the Software 8 8 Installing the Software 8.2 MultiScreen "MultiScreen" enab les users to use the monitor b y partitioning multip le sections. 8.2.1 Installing the Software 1 Insert the installation CD into the CD-ROM drive. 2 Select the " MultiScreen" setu p program.
77 Installing the Software 8 8 Installing the Software Hardware At least 32MB of memory At least 60MB o f free space o n the hard disk drive 8.2.2 Removing the Software Click Start , select Settings / Co ntrol Panel , and then d ouble-clic k Add or Remove Programs .
78 9 Troubleshooting Guide 9 Troubleshooting Guide 9.1 Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your prod uct as follows. If the problem persists, contact Samsung Customer Service Center.
79 Troubleshooting Guide 9 9 Troubleshooting Guide The message Chec k Signal Cable appears. Check that t he cable is properly con nected to the product. (Refer to "2.3 Connecting and Using a PC") Check that th e device connected t o the produ ct is powered on.
80 Troubleshooting Guide 9 9 Troubleshooting Guide Sound issue There is no sound. Check the co nnection of t he audio c able or adjust the volume. Check the volu me. The volume is too lo w. Adjust the volume. If the volume is still low af ter turning it up to the maximum level, a djust th e volume on your PC sound card or software program.
81 Troubleshooting Guide 9 9 Troubleshooting Guide 9.2 Q & A Question Answer How can I change the frequency? Set the freque ncy on your grap hics card. Windows XP: Go to Control Panel Appearance an d Themes Display Settings Advanced Monitor , and adjust Refres h rate under Monitor se ttings .
82 Troubleshooting Guide 9 9 Troubleshooting Guide Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the resolution? Windows XP: Go to Control Panel Appearance and Themes Display Settings , and adjust t he resolution .
83 10 Specifications 10 Specifications 10.1 General Model Name S22C570H S23C570 H S24C570HL Panel Size 21.5 Inches (54 cm) 23 Inches (58 cm) 23.6 Inches (59 cm) Display area 476.64 mm (H) x 268.11 mm (V) 18.77 Inches (H) x 10.56 Inches (V) 509.76 mm (H) x 286.
84 Specifications 10 10 Specifications The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. Dimensions (W x H x D) / Weight Without Stand 507.6 x 312.0 x 100 mm 20.0 x 12.3 x 3.9 Inches 546.
85 Specifications 10 10 Specifications 10.2 PowerSaver The power-sa ving funct ion of this p roduct redu ces power c onsumption by switching o ff the scree n and controlling the power L ED status if t he product is not use d for a sp ecified perio d of time.
86 Specifications 10 10 Specifications 10.3 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality.
87 Specifications 10 10 Specifications Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency.
88 Appendix Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relati ng to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7 864) http://www.samsun g.com CANADA 1-800-SAMSUNG (726-78 64) http:/ /www.
89 Appendix Appendix GUATEMALA 1-800-299-00 13 http://www.samsung.com/latin (Spanish) http://www.samsun g.com/latin_en (English) HONDURAS 800-27919267 http://www. samsung.com/la tin (Spanish) http://www.samsun g.com/latin_en (English) JAMAICA 1-800-234-7267 http://www.
90 Appendix Appendix CZECH 800 - SAMSUNG (800-726786) h ttp://www.samsung .com DENMARK 70 70 19 70 http://www.s amsung.com EIRE 0818 717100 http://www.s amsung.com ESTONIA 800-7267 http://www.samsung .com FINLAND 09 85635 050 http://www. samsung.com FRANCE 01 48 63 00 00 http:/ /www.
91 Appendix Appendix SWEDEN 0771 726 7864 (SAMSUNG) http://www. samsung.com SWITZERLAND 0848-SAMSUNG (7267864, CHF 0.08 /min) http://www.sam sung.com/ch (German) http://www.samsung.com/ch _fr (French) U.K 0330 SAMSUNG (7267864) http://www.s amsung.com CIS ARMENIA 0-800-05-555 http://www.
92 Appendix Appendix INDIA 1 800 1100 11 3030 8282 1800 3000 8282 1800 266 828 2 http://www.sam sung.com INDONESIA 0800-112-8888 021-5699- 7777 http://www.sam sung.com JAPAN 0120-327-527 http ://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsun g.
93 Appendix Appendix MOROCCO 080 100 2255 http://www.samsu ng.com OMAN 800-SAMSUNG (726-7864) http://www.samsung.com /ae (English) http://www.sam sung.com/ae _ar (Arabic) SAUDI ARABIA 9200-21 230 http://ww w.samsung.com/ae (English) http://www.sam sung.
94 Appendix Appendix Responsibility for the Pay Se rvice (Cost to Customers) When the service is requested, in spite of in warra nty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustme nt, Explanation, Re-installation and etc .
95 Appendix Appendix If customer requests a service in case the product has no defect, service fee may be charged. So please read User Manual first..
96 Appendix Appendix Correct Disposal Correct Disposal of This Product (Waste Electri cal & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on th e product, ac cessories or literatu re indicates that t he product an d its electronic acce ssories (e.
97 Appendix Appendix Terminology OSD (On Screen Display) On screen display (OSD) a llows you to customize on-scr een settings to optimi ze the picture quality a s required. You can chan ge the scree n brightness, t int, size an d many othe r settings using menu s displayed on the screen.
98 Appendix Appendix Resolution Resolution is the nu mber of horizo ntal pixels and ve rtical pixels that f orm a screen. It represents t he level of display detail. A higher reso lution disp lays a greate r amount of informatio n on the sc reen and is su itable for performing mult iple tasks at the sa me time.
Index 99 Index A Appendix 88 B Before Co nnecting 30 Blue 56 Brightness 41 C Checking the C ontents 19 Cleaning 8 Coarse 52 Connecting and Using a PC 31 Contact SAMSUNG WORLD WIDE 88 Contrast 42 Copyr.
Index Index 100 Responsibility for the Pay Service (Cost to Customers) 94 S Safety Precautions 10 SAMSUNG MAGIC Bright 44 Sharpness 43 Source Det ection 69 Standard Sign al Mode Table 86 T Transparenc.
An important point after buying a device Samsung S27C570H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung S27C570H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung S27C570H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung S27C570H you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung S27C570H will certainly help you make a decision on the purchase.
If you already are a holder of Samsung S27C570H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung S27C570H.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung S27C570H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung S27C570H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
