Instruction/ maintenance manual of the product CT-5460TW Autostart
Go to page of 16
DOC : 1.02 DL Fb March 17, 2006 Manufactu red in Canada by Autostart T W O - W A Y L C D REMOTE STARTER S Y S T E M WITH FULL A A L A R M S Y S T E M F O R M A N U A L T R A N S M I S S I O N V E H I C L E S CT-5460TW User Guide The Transmitter’s Battery: Depending on the usage, the transmitter’s battery can last between 3 to 6 months.
User Guide P. 2 Table of Contents Table of Contents ................................... 2 Introduction ............................................. 3 Remote-Starting Your Vehicle ................ 3 Remote-starting ................................. 3 Vehicle Presets .
User Guide P. 3 Introduction This System is a state-of-the-art remote car starter and alarm combo system. The system is packed with advanc ed features s uch as priority ac cess to the driv er’s door.
P. 4 User Guide 1. Ensure t hat all the doors ar e closed and that the gears hift lever is i n the NEUTRAL posit ion. 2. With the engine already running, apply the parking bra ke and release t he brake pedal. Make sure to release t he brake pedal. 3. Within 20 sec.
User Guide P. 5 To enable Idle Mode: 1. With the engine runni ng, press the LOCK or UNLOCK button (to unlo ck the doors) or the START/STOP button on the remo te control unti l the parking li ghts come on. 2. Remove t he key and exit th e vehicle. The engine will go on running.
P. 6 User Guide Note : With the Remote Valet ac tivated, the remote sta rter and alarm functio ns will be disabled. Start Attempts Indicator (Valet Mode) This reveals start attempts made while the vehicle was in Valet Mode . T he parking lights w ill: Come ON , go OUT ; then Flash twice .
User Guide P. 7 Quick Lockout TM (Also called Secur e Panic .) For fast protection, the system will LOCK all doors when yo u press the brake pedal while the horn is act ivated and the system is in P anic Mode . (Quick Lockout is only available when Panic Mode has been activ ated.
P. 8 User Guide 2. The parking lights will fl ash once and the LED wi ll flash slowly to confirm that the doors have been locked an d that the starter k ill feature is e nabled if it was i nstalled. The horn will give one signal if configured at installation.
User Guide P. 9 Safe Start If this feature is enable d, it will require the user to press the START/STOP button twice within 3 seconds to start t he vehicle. This will e liminate acc idental remote starts (for example, if t here are children playing wi th the transmit ter).
P. 10 User Guide x On models where starter kills were in stalled, pressing the LOCK button will also activate the starter kill. x On alarm models, pressing the LOCK button wi ll also act ivate the monitor ing. The Stop Confirmation Was Not Received If after remote stopping t he vehicle no confir mation was rec eived i.
User Guide P. 11 Your installer can customize the system as to personalize t hese multi-level features in an order that best suits you. Your options are: Option 1: Level 1 (requires pressing the FUNCT.
P. 12 User Guide Using the Remote Control Transmitter may not be exactly as shown. The transmitter offers several command-confirmation and ti mer features. This section explains some of the key transmitter functions that are available. The following section gives a summary of the button combinations used to access those functi ons.
User Guide P. 13 Transmitter Mode Selection FUNCTION BUTTON PRESSED ICON BUZZER INSTRUCTIONS /DES CRIPTION POWER-SAVING MODE + ( + ) Melody Press unlock fi rst and th en press the funct ion button and the lock butt on simultane ously .
P. 14 User Guide Cold Weather Mode Function Button pressed Icon Sound Instructions /description for 1 sec 1 Beep To enter cold weather mode for 3sec 1 Beep Press for 1 second and then pr ess and ho ld for 3 seconds. for 1sec 1 Beep To exit cold weather mode for 3sec None Press for 1 second and then pr ess and ho ld for 3 seconds.
User Guide P. 15 15 minutes 20 minutes 25 minutes 30 minutes LCD Transmitter Operation ( Second Car Control ) Basic Vehicle Operation FUNCTION BUTTON PRESS ICON BUZZER DESCRIPTION LOCK + 1 Beep Locks the doors and arms the Starter Kill (if installed) and the alarm.
P. 16 User Guide Diagnostics – Parking Light Flash Table Flashes Description 1 x Doors locked, Alarm and Starter Kill arme d. x End of Run Time. x TRUNK button pressed x Start signal received by the System. x Cold Weather Mode cancelled. 2 x Doors unlocked, alarm and starter Kill disarmed.
An important point after buying a device Autostart CT-5460TW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Autostart CT-5460TW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Autostart CT-5460TW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Autostart CT-5460TW you will learn all the available features of the product, as well as information on its operation. The information that you get Autostart CT-5460TW will certainly help you make a decision on the purchase.
If you already are a holder of Autostart CT-5460TW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Autostart CT-5460TW.
However, one of the most important roles played by the user manual is to help in solving problems with Autostart CT-5460TW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Autostart CT-5460TW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
