Instruction/ maintenance manual of the product CT-3360 Autostart
Go to page of 7
DOC . 3 . 55 Ds Ca November 2, 2004 Manufactured in Canada by Autostart MANUAL TRANSMISSION MULTI - CHANNEL REMOTE STARTER SYSTEM CT - 3360 User Guide Introduction ................................................... 2 Basic Remote Ope ration .........
P. 2 User Guid e CT - 3360 Introduction This Module is a state - of - the - art remote car starter system. With many advanced function, this product will satisfy any one of the user’s expectations from high - end commodity systems, without neglecting the sta ndard features commonly offered by entry - level starters.
CT - 3360 User Guide P. 3 Remaining in Ready Mod e Once the vehicle is in Ready Mode you can start and stop the vehicle at wish. However, if any one of the following events occurs, the vehicle will ex.
P. 4 User Guid e CT - 3360 To enable Idle Mode, press and hold the LOCK , UNLOCK or START/STOP button on your remote transmitter while the engine is running. Note: When en abling Idle Mode, pressing LOCK or UNLOCK will automatically unlock the doors. The parking lights will come ON .
CT - 3360 User Guide P. 5 • Or press and hold the LOCK button for approximately 3 seconds until the sound signal starts and the parking lights flash: this will lock the doors before the sound signal starts. Panic Mode will automaticall y shut down after 30 sec.
P. 6 User Guid e CT - 3360 Installer - program mable Features Note: The programming of these features should be left to a professional. Changing any one of the settings may adversely affect the operation the Module .
CT - 3360 User Guide P. 7 Multi - car Operation This option allows the owner of two vehicles, both equipped with the same Remote Car Starter model, to control both systems with a single remote control. To control the second vehicle, simultaneously press the TRUNK button and the button of the function you wish to use.
An important point after buying a device Autostart CT-3360 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Autostart CT-3360 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Autostart CT-3360 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Autostart CT-3360 you will learn all the available features of the product, as well as information on its operation. The information that you get Autostart CT-3360 will certainly help you make a decision on the purchase.
If you already are a holder of Autostart CT-3360, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Autostart CT-3360.
However, one of the most important roles played by the user manual is to help in solving problems with Autostart CT-3360. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Autostart CT-3360 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
