Instruction/ maintenance manual of the product AS-6250V Autostart
Go to page of 15
ONE -WAY A UTO MATIC /MAN UAL TRANSMIS SION REMOTE ST ARTER WIT H FULL ALARM SYSTEM DOC. 1.00 - AS-6250v - - August 28, 2007 - - MO - Assembled in Canada AS-6250v User Guide WARNING It is the responsibility of the vehicle op erator to ensure their vehicl e is parked in a saf e and responsibl e manner.
P. 2 User Guide Table of Contents Transmitter Part Number and Module Ser ial Number ............................................................... 3 Introducti on ....................................................... 3 Basic Remote Oper ation .....
User Guide P. 3 Transmitter Part Number an d Module Serial Number Transmitter Part Number: The installer is to write in the boxes below the Module’s serial number and the location of the Valet Switch.
P. 4 User Guide Basic Remote Operation This system is equipped with a 5-button mult i-channel transmitter. It can operate two in- dependent identically-equipped vehicles (see Multi-Car Operation for second-car transmitter functions).
User Guide P. 5 quickly an d remain lit . Skip to step 4. 3. Within 20 sec. of engaging the parking brake, press and hold LOCK , UNLOCK or START/STOP on the transmitter. The parking lights will fl ash 3 times quickly and remain lit. - 4. Remove the key: the engi ne will continue running.
P. 6 User Guide delivery or at a convenience store, lock your vehicle and leave it running for the le ngth of a run cycle while you are away. To leave the vehicle in Idle Mode if your vehic le has an automatic transmission : 1.
User Guide P. 7 Igniti on V alet The system can be placed in Val et Mode to disable the remote starting capabilitie s. If the vehicle needs to be serviced, or if you park it indoors, Valet Mode will prevent the engine from being accidentally started by remote control.
P. 8 User Guide 4. Flash twice again. Panic Mode Safety feature: Activate Panic Mode in an emergency situation. In an emergency situation, you can activate Panic Mode using th e LOCK or UNLOCK or STOP button.
User Guide P. 9 Priority Door Access This safety feature lets you unlock only the driver’s door when you press the UNLOCK button on the transmitter, and then UNLOCK the rest of the vehicle doors if the UNLOCK button is pressed for a second time within 3 seconds.
P. 10 User Guide Remote Door Locks If your system was installed with the Remote Door Locks opti on, you will have the convenience of remote keyless entry. To UNLOCK your doors and DISARM the system: 1. Press and hold the UNLOCK button for approx. 1 sec.
User Guide P. 11 Open Zone Noti fication (the system will warn for doors opened up to 10 seconds after arming). No Chirp (the vehicle will not chirp under any circumstance). Open Zone No tifi cation (Off by default. ) This feature will warn the user when a Door is left open: upon the arming of the Module, a 10-sec.
P. 12 User Guide If your vehicle has an automatic transmission , proceed as follows to set the system in Turbo Mode : 1. With the engine already running, press the LOCK button on the transmitter until the parking lights come ON . 2. Remove the ignition key from the ignition sw itch.
User Guide P. 13 Mul t i-Ca r O p er at ion This option allows the owner of two vehicles, both equipped with identica l systems, to control both systems with only one remote transmitter.
P. 14 User Guide Parking Lights Flash Ra te (Normal Operation) Flashes Description 1 • Doors locked, Alarm and starter kill armed. • Run time has expired. • TRUNK button pressed. • Start signal received by the module. • Cold weather mode cancelled.
User Guide P. 15 LIMITED LIFETIME WARRANTY REMOTE STARTERS: As the manufacturer, 43 66859 Canada Inc. (“Autos tar t”) warrants to the origin al consumer purchaser only ( nontransferable ) t hat th.
An important point after buying a device Autostart AS-6250V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Autostart AS-6250V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Autostart AS-6250V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Autostart AS-6250V you will learn all the available features of the product, as well as information on its operation. The information that you get Autostart AS-6250V will certainly help you make a decision on the purchase.
If you already are a holder of Autostart AS-6250V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Autostart AS-6250V.
However, one of the most important roles played by the user manual is to help in solving problems with Autostart AS-6250V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Autostart AS-6250V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
