Instruction/ maintenance manual of the product AS-6205 Autostart
Go to page of 11
H.3.10.S.3.20 DOC.1.00 CA – September 15, 2003 Manufact ured in Canada by Autostart AUTOMATI C TRANSMI SSION MULTI-CHANNEL REMOTE STARTER AN D FULL-F EATURED ALARM S YSTEM AS-6205 User Guide Transmitter Part Numb er and Module Seri al Number ...
Transmitter Part Number an d Module Serial Number Transmitter Part Number: ASTR-575-433 The installer is to write in the boxes below the Module’s serial number and the location of the Valet Switch.
Basic Remote Operation This system is equipped with a 5-button multi-channel two-way transmitter. It can o perate two independent identically-equipped vehicles (see Multi-Car Operation for second-car transmitter functions).
AS-6205 SH User Guide P. 4 x Turn the ignition key to the IGNITION ON (RUN) position. ( Do not turn the key to the START position while the engine is running. This will cause the starter motor to re-engage.) x Press the brakes to disengage the remote starter unit.
P. 5 User Guide AS-6205 SH Remote Valet This feature will put your vehicle into Valet Mode using the remote transmitter instead of the Valet button as above. Note: Once the Electronic Valet i s activated, the remote start er and Alarm featur es are disabled.
AS-6205 SH User Guide P. 6 x Or press and hold the LOCK button for approximately 3 seconds until the siren starts to sound and the parking lights flash: this will lock the doors before the siren sounds. Panic Mode will automatically shut down after 1 minute.
P. 7 User Guide AS-6205 SH Shock Delete The shock sensor can be temporarily disabled. To temporarily disable shock and warn-away sense : x Press the TRUNK button and, within 3 seconds, x Press the STOP button. Shock senses will now be ignored until the next disarming of the system.
AS-6205 SH User Guide P. 8 Passive or Active Arming By default, the system is configured to Passive Arming Mode . In Passive Arming Mode, the Starter Kill and the Alarm will automatically arm 30 seconds after the last door is closed. The system will not arm itself if a door is left open.
P. 9 User Guide AS-6205 SH Ignition Re-Lock When the Ignition-Controlled Door Locks option is enabled and the ignition is ON , should any door be unlocked and opened, all the doors will be re-locked next time the brake pedal is pressed. Secure Lock This is an added security feature.
x Press TRUNK + LOCK button simultaneously: .................. LOCK x Press TRUNK + UNLOCK : ................................................... UNLOCK x Press TRUNK + START : .................................................... START x Press TRUNK + STOP : .
Parking Lights Flash Rate (Normal Operation) Flashes Description 1 x Doors locked, Starter Kill armed. x End of Run Time. x TRUNK button pressed x START signal received by the Module. x Cold Weather Mode cancelled. x Cannot start after maximum number of attempts is reached.
An important point after buying a device Autostart AS-6205 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Autostart AS-6205 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Autostart AS-6205 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Autostart AS-6205 you will learn all the available features of the product, as well as information on its operation. The information that you get Autostart AS-6205 will certainly help you make a decision on the purchase.
If you already are a holder of Autostart AS-6205, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Autostart AS-6205.
However, one of the most important roles played by the user manual is to help in solving problems with Autostart AS-6205. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Autostart AS-6205 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
