Instruction/ maintenance manual of the product AS-2510 TW Autostart
Go to page of 14
AUTOMATIC TRANSMISSION REMOTE STARTER AS-2510 TW User Guide A note concerning the battery inside the transmitter: Depending on the usage of the transmitter, the battery can last anywhere between 3 to 6 mont hs. When the battery is low, it the transmitter will emit two beeps in a repetitive cycle.
AS-2510TW User Guide P. 2 Table of Contents Table of Contents ................................... 2 Transmitter Part Number and Serial Number of the Remote Car Starter Module .................................................... 3 Introduction ........
P. 3 User Guide AS-2510 TW Transmitter Part Number and Serial Number of the Remote Car Starter Module The boxes below contain i nformation conc ern ing your transmitter and Remote Car Starter.
LCD Remote Functions The Transmitter offers several command-confirmation and timer features. This section explains some of the key functions available on the Remote Control. Next section gives a summary of the button combinations used to access the functions (see LCD Remote Operation Tables).
Parking Countdown This version of the Countdown fe ature is particularly useful for keeping trac k of parking meter time: th e user may quic kly set up the countdow n in slices of 10 or 30 min utes using the and buttons (refer to t he tables).
Transmitter Mode Selection FUNCTION BUTTON PRESSED ICON BUZZER INSTRUCTIONS /DES CRIPTION POWER-SAVING MODE + ( + ) MELODY Press UNLOCK first and then press the Functio n button and the Lock bu tton simultaneously.
Home Valet TM FUNCTION BY PRESSING ICON BUZZER INSTRUCTIONS / DESCRIPTION TO ENTER HOME VALET™ MODE Step 1 : or Step 2 : + Simultaneously within 5 sec. 1 BEEP Press or Within 5 seconds, press + : the Transmitter will display and you will hear 1 beep.
LCD Transmitter Operation and Confirmations (Second Car Control) Basic Operations FUNCTION BUTTON PRESS ICON BUZZER DESCRIPTION LOCK + 1 Beep UNLOCK + 2 Beep START + + MELODY STOP + None MELODY TR.
Windshield Wipers & Radio & Headlights Certain vehicles require the radio and / or windshield wiper and / or headlight circuits to become energized whil e running under r emote start. Wh en leaving the v ehicle you mus t ensure that the windshield wiper and headlight switches are OFF .
AS-2510 TW User Guide P. 10 1. With the engine alrea dy running, press the LOCK button on the tran smitter until the parking lights come ON . 2. Remove the igniti on key from the ignition switch. The engine wil l go on running. 3. Exit the vehicle an d close the door.
Remote Valet Mode This feature will allow you to remotely put your system into Valet Mode by using the transmitter instead of the Va let button as a bove. Getting i n t o Valet Mode x Hold the UNLOCK and START/STOP buttons simu ltaneously for 3 seconds.
AS-2510 TW User Guide P. 12 When the vehicle exits Cold W eather Mod e, t he Parking Lights will flash once. If Safe Start is enabled , you can activate Cold Weather Mode by x Pressing and releasing t.
P. 13 User Guide AS-2510 TW Horn Chirp Timing The duration of the chirps can be adjusted at installation (from 5 to 200 ms). Flashing LED The user may decide t o turn on or off LED flashing at a ny moment. To do so, sim ultaneously press the TRUNK and LOCK buttons on the transmit ter: x Flashing LED ON : the L.
AS-2510 TW User Guide P. 14 Remote Trunk Release If your system was installed with the Remote Trunk Release option, you c an open your trunk by pressing the TRUNK button for 3 seconds on the remote transmitt er or by pressing the TRUNK but ton TWICE within 3 seconds.
An important point after buying a device Autostart AS-2510 TW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Autostart AS-2510 TW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Autostart AS-2510 TW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Autostart AS-2510 TW you will learn all the available features of the product, as well as information on its operation. The information that you get Autostart AS-2510 TW will certainly help you make a decision on the purchase.
If you already are a holder of Autostart AS-2510 TW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Autostart AS-2510 TW.
However, one of the most important roles played by the user manual is to help in solving problems with Autostart AS-2510 TW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Autostart AS-2510 TW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
