Instruction/ maintenance manual of the product AS-2500 TW Autostart
Go to page of 14
AUTOMATIC TRANSMISSION M ULTI-CHANN EL TWO-WAY LCD REMOTE STARTER SYSTEM AS-2500 TW User Guide Transmitter Part Number a nd Module Serial Number ............. 2 Introduction............................... 2 What is “eSH” Technology? ..... 2 Basic Remote Operation .
Transmitter Part Number an d Module Serial Number Transmitter Part Number: ASTR-5614 Transmitter (companion) P art Number: ASTR-LCD1 The installer is to write in the foll owing box the Modu le’s serial num ber. Module Serial Number: Introduction This system is a state-of-the-art remote car starter system with command confirmation.
Basic Remote Operation This Unit is equipped wit h a multi-channel 5-but ton LCD remote transmitter. It c an operate two independent Autostart-equ ipped vehicles (see Multi-car Operat ion for 2 nd car functions).
Alarm Clock The LCD Remote Control has a built-in Ala rm Clock which can be s et up using the button. Use the and buttons to s witch the Alarm Clock on and off (refer to the tables). Time Adjust Mode Use Time Adjust Mode to set the current time on your Remote Control using the button (refer to the tables).
will stop by itself after one minute, or it c an be switched off by pressing the Lock ( ) or the Unlock ( ) button on the Remote Control. LCD Remote Operation (First Car Control) NOTE: The following section explains the functions the Transmitter can provide.
8* TIMING COUNT DOWN ADJUST MODE (MIN) 8 th press of 9 TIMING COUNT DOWN ENDING MELODY SELECTION 1 9 th press of 5 SELECTIONS 1,2,3,4,5 10 TIMING COUNT DOWN MODE (ON/OFF) 10 th press of / 11 START COM.
Please NOTE: Once the Countdown is activated it will continue counting down until reaching 0:00. If the Timer has not reached 0:00 and you are starting the vehicle, you should reset your Countdown Timer to 0:00 before starting your vehicle as to avoid being startled.
P. 8 User Guide AS-2500 TW Timing and Alarm Adj ustment To apply changes to the h ours, minutes melo dy, etc. you must press and hold the Functio n button for three (3) seconds after which the hour position will start to flash. To navigate throug h the options, simply press the Function b utton until you r each the desired positio n.
The engine will go on running. It will shut down when the pr e-programme d run time expires. Caution: Do not leave chil dren or pets unattende d in a car running in Idle Mode. Note: When enabling Idle Mo de, pressing LOCK or UNLOCK will unlock the doors (if Remote Door Locks are installed).
To ENTER Valet Mode 1. With the key in the Ignition switch, turn the key to the ON (RUN/IGNITION) and then OFF positions 5 times within 10 s econds. 2. The Parking Lights will flash 3 times indicati ng the Module is now in Val et Mode. The LED will turn ON solid.
Remote Door Locks Option If your system was installed with the Remote Door Locks option, you will have the convenience of remote keyless entry. To u n l o c k your doors and d i s a r m the system: 1. Press and hold the UNLOCK button for ap prox. 1 sec.
P. 12 User Guide AS-2500 TW Starter Kill Option With this added security feature, the system will prevent your vehicle from starting with the Ignition Key when the Starter Kill is armed. If your Autostart was installed with t he Starter Kill option, you will not be able to start your vehicle with the Key unless the system has been unlocked first.
AS-2500 TW User Guide P.13 Multi-car Operation This option allows the owner of two vehicles both e quipped with identic al systems to control bot h systems with only one remote tran smitter.
P. 14 User Guide AS-2500 TW Diagnostics – Parking Lights Flash Rate (Normal Operation) Flashes Description 1 x Doors locked, Starter Kill armed. x End of Run Time. x TRUNK button pressed x Start signal received by the Module. x Cold Weather Mode cancelled.
An important point after buying a device Autostart AS-2500 TW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Autostart AS-2500 TW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Autostart AS-2500 TW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Autostart AS-2500 TW you will learn all the available features of the product, as well as information on its operation. The information that you get Autostart AS-2500 TW will certainly help you make a decision on the purchase.
If you already are a holder of Autostart AS-2500 TW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Autostart AS-2500 TW.
However, one of the most important roles played by the user manual is to help in solving problems with Autostart AS-2500 TW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Autostart AS-2500 TW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
