Instruction/ maintenance manual of the product AS-1451HF Autostart
Go to page of 10
DOC.1.00 DL Lp November 17, 2006 Manufactured in Canada by Autostart AUTOMATIC/MANUAL TRA NSMISSION REMOTE STARTER SYSTEM AS-1451HF/AS-1452 HF User Guide WARNING It is the responsibility of the veh icle operator to ensure their vehicle is parked in a safe and responsible manner.
P. 2 User Guide Table of Contents Introduction ..................................................... 2 Basic Remote Operation ................................ 3 Vehicle Presets ................................................ 3 Heater and Heated Seat .
User Guide P. 3 Basic Remote Operation Your remote car starter can operate two independent vehicles equipped with an identical remote car starter (see multi-car operation on page 8). The functions of the transmitter are as follows: Pressing the LOCK and UNLOCK buttons simultaneously will activate the AUX 2 output.
P. 4 User Guide also unlock the doors.) In Passive Mode, the system will automatically rearm 1 or 3 minutes after the doors were unlocked. • To arm the Starter Kill in Active or Passive Mode, press and hold the LOCK button on the transmitter. The parking lights will flash once.
User Guide P. 5 If the vehicle does not start at the first attempt, the system will shut down, wait a few seconds and try to start the engine again. If your vehicle is equipped with an automatic transmission , there will be 3 start attempts before the system gives up.
P. 6 User Guide Valet Modes When your vehicle is in Valet Mode, the remote starter functionalities are disabled. If the vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine from being remote-started accidentally.
User Guide P. 7 Cold Weather Mode When Cold Weather Mode is active, the engine starts every 2 hours and runs for 3 minutes (or for 20 minutes with Diesel engines); t he routine goes on for a period of 24 hours.
P. 8 User Guide Secure Lock Option Before it can remote-start your vehicle, the module must first disarm the factory security system. The Secure Lock feature may be required on cert ain vehicle models with factory security systems that automatically unlock the doors when the security system is disarmed.
User Guide P. 9 Troubleshooting Poor Transmitting Range Issues Many factors may affect the operating range of the transmitter. Some of these are: • The condition of the battery in the transmitter.
P. 10 User Guide LIMITED LIFETIME WARRANTY REMOTE STARTERS: As the manufacturer, 160031 Canada Inc. (“Autostart”) warrants to the original consumer purchaser only ( non-transferable ) that the rem.
An important point after buying a device Autostart AS-1451HF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Autostart AS-1451HF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Autostart AS-1451HF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Autostart AS-1451HF you will learn all the available features of the product, as well as information on its operation. The information that you get Autostart AS-1451HF will certainly help you make a decision on the purchase.
If you already are a holder of Autostart AS-1451HF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Autostart AS-1451HF.
However, one of the most important roles played by the user manual is to help in solving problems with Autostart AS-1451HF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Autostart AS-1451HF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center