Instruction/ maintenance manual of the product AS-1424 Autostart
Go to page of 6
H.3.10.S.3.20 DOC: .3.20 August 20, 2003 DS CA Manufactured in Canada by Autostart AUTOMATIC TRANSMISSION MULTI-CHANNEL REMOT E STARTER SYSTEM AS-1414/ AS-1424 User Guide Transmitter Part Numb er and Module Seri al Number..............................
Transmitter Part Number an d Module Serial Number Transmitter Part Number: ASTR-204 The installer is to write in the boxes below the Module’s serial number and the location of the Valet Switch ( If the Valet switch is install ed ).
AS-1414/AS-1424 User Guide P. 3 Remote-starting Your Vehicle Press the START/STOP button for approx. 1 second. The parking lights will come ON , informing you that the unit has received your signal. Appro x. 5 seconds later, the engine will start. The parking lights will remain ON during the pre-programmed run time.
P. 4 User Guide AS-1414/AS-1424 To ENTER Valet Mode 1. With the key in the Ignition switch, turn the key t o the ON (RUN/IGNITION) and then OFF positions 5 times within 10 seconds. 2. The Parking Light will flash 3 times indicat ing the Module is now in Valet Mod e.
AS-1414/AS-1424 User Guide P. 5 Arming the Starter Kill If installed, the Starter Kill can be programmed to arm in Active Mode (will not arm automatically) or in Passive Mode (will arm automatically). x To disarm the Starter Kill in Active or Passive Mode, press the UNLOCK button on the trans- mitter.
P. 6 User Guide AS-1414/AS-1424 Starter Kill / Anti-Grind This added security feature will immobilize your vehicle when the syst em is armed (LOCKED). If your Module was installed with the Starter Kill option, you will not be able to start your vehicle with the key unless the system has been disar med first (UNLOCKED).
An important point after buying a device Autostart AS-1424 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Autostart AS-1424 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Autostart AS-1424 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Autostart AS-1424 you will learn all the available features of the product, as well as information on its operation. The information that you get Autostart AS-1424 will certainly help you make a decision on the purchase.
If you already are a holder of Autostart AS-1424, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Autostart AS-1424.
However, one of the most important roles played by the user manual is to help in solving problems with Autostart AS-1424. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Autostart AS-1424 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
