Instruction/ maintenance manual of the product dcs application Samsung
Go to page of 10
Samsung DCS Application Note No 14 - Issue 01 For Further Information Call LSP Communications No. 14 September 1997 Topic P rimary Rate ISDN Introduction This Application Note describes the installation, configuration and operation of the PRI cards in the Samsung DCS for use with Telstra’s On Ramp 10, 20 and 30 Primary Rate ISDN service.
Samsung DCS Application Note No 14 - Issue 01 For Further Information Call LSP Communications 4. Connect the RJ45 socket to the NT1 as per the latest version of the ACA (AUSTEL) standard TS009 or the Customer’s Premises Cabling Manual.
Samsung DCS Application Note No 14 - Issue 01 For Further Information Call LSP Communications In Normal mode the incoming calls are routed according to the trunk ring assignment in MMC 406. Calls on unassigned lines are routed to the operator group. In DDI mode the incoming calls are routed in accordance with the DID Table (MMC714).
Samsung DCS Application Note No 14 - Issue 01 For Further Information Call LSP Communications Indial, MMC714 & DID Number & Name Translation Table DESCRIPTION. This command provides a flexible method of assigning incoming DDI calls to specific destinations.
Samsung DCS Application Note No 14 - Issue 01 Page 5 of 10 For Further Information Call LSP Communications BYPASS OPERATION. In some installations, the customer will have a DID range of 1000 numbers where the last three digits of the number are the same as the destination extension.
Samsung DCS Application Note No 14 - Issue 01 Page 6 of 10 For Further Information Call LSP Communications Entry 2. If the system sees an incoming call to any eight digit number starting with 989992, the system will strip the first five digits off the number and route the call to station 2** given by the last three digits of the incoming number.
Samsung DCS Application Note No 14 - Issue 01 Page 7 of 10 For Further Information Call LSP Communications Incoming CLIP When an incoming call is presented to a display keyset, the CLI data is displayed in the top row of the LCD.
Samsung DCS Application Note No 14 - Issue 01 Page 8 of 10 For Further Information Call LSP Communications If the trunk number programmed using MMC405 is not in the valid address range for that line o.
Samsung DCS Application Note No 14 - Issue 01 Page 9 of 10 For Further Information Call LSP Communications If a user accidentally hangs up an incoming ISDN call, it is not possible to recover the call by pressing the line key (because the ISDN signalling is too quick and the call will already be cleared through the network).
Samsung DCS Application Note No 14 - Issue 01 Page 10 of 10 For Further Information Call LSP Communications TIPS DDI and Call Forwarding No Answer The operation of Call Forward No Answer depends on the setting of Call Wait as shown in the table below.
An important point after buying a device Samsung dcs application (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung dcs application yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung dcs application - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung dcs application you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung dcs application will certainly help you make a decision on the purchase.
If you already are a holder of Samsung dcs application, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung dcs application.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung dcs application. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung dcs application along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
