Instruction/ maintenance manual of the product SP-11CDS Audiovox
Go to page of 8
INST ALLA TION MANUAL MODEL SP-1 1CDS 10-DISC CD CHANGER SP-11CDS DIGITAL AUDIO/COMPACT DISC CHANGER 10 DISC AUTO CHANGER COMPACT DISC AUDIO CHANGER SYSTEM.
SP-11CDS DIGITAL AUDIO/COMPACT DISC CHANGER 10 DISC AUTO CHANGER COMPACT DISC AUDIO CHANGER SYSTEM Installation Manual 1 pc. Owner's Manual 1 pc. Machine Screw (M4x 10) 4 pcs. Hexagonal Bolt (M6 x 15) 4 pcs. INST ALLA TION P ARTS OTHER ACCESSORIES MAIN UNIT 2 P ACKING LIST Changer Stud Bracket Hexagonal Nut (M6) 4 pcs.
Note If the changer is to be installed in a car that is equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation, to prevent a short circuit.
PROCEDURE FOR HORIZONT AL INST ALLA TION W/O STUDS 1 2 3 Attach a bracket to each side of the unit, using the machine screws with integral flat and lock washers (M4 x 10). In the horizontal position, use bracket mounting holes 1 and 1' as shown at the right.
4 2 Attach bracket to each side of the unit, using machine screws with integral flat and lock washers. (M4 x 10). In the vertical position, use holes 2 and 2' as shown at left. Mount the unit in place, using four self-tapping screws (M5 x 12). Use RTV (silicone sealer) on screw threads and around the holes to prevent moisture intrusion.
4 2 Attach bracket to each side of the unit, using the machine screws with flat and lock washers (M4x 10). In the 45 position, use holes 1 and 3' as shown at left. Mount the unit in place, using four self-tapping screws (M5 x 12). Use RTV (silicone sealer) on screw threads and around the holes to prevent moisture intrusion.
PROCEDURE FOR CHANGER INST ALLA TION USING MOUNTING STUDS Note: Make sure the anti-vibration spring position has been changed and verified for the proper angle mounting (as shown on page 4).
© 2000 AUDIOVOX CORP., HAUPPAUGE, NY Printed in China 128-5777A VEHICLE WIRING DIN cable (8-pin) CD changer Car Stereo with CD Changer Controls Mating 8-pin DIN socket on rear of compatible radio chassis (see note 1 below). NOTE: 1. Check with your Audiovox car audio dealer to be sure your stereo is directly compatible with this CD changer.
An important point after buying a device Audiovox SP-11CDS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox SP-11CDS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox SP-11CDS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox SP-11CDS you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox SP-11CDS will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox SP-11CDS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox SP-11CDS.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox SP-11CDS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox SP-11CDS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
