Instruction/ maintenance manual of the product SP-10CD Audiovox
Go to page of 8
INST ALLA TION MANUAL MODEL SP-10CD 10-DISC CD CHANGER SP-10CD.
CD Magazine 1 pc. Index seal sheet 1 pc. Installation Manual 1 pc. Owner's guide 1 pc. Self-tapping screw (M5 x 12) 4 pcs. Seals (A) 1 pc. 5 Meter Din Cable 1 pc. Hexagonal bolt with washer (M5 x 10) 4 pcs. INST ALLA TION P ARTS OTHER ACCESSORIES MAIN UNIT 1 P ACKING LIST Changer Bracket (L) 1 pc.
Note If the changer is to be installed in a car that is equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation, not to cause a short circuit.
Drill holes 4mm in diameter. PROCEDURE FOR HORIZONT AL INST ALLA TION 1 2 3 Bracket (R) Attach bracket (L) and bracket (R) to each side of the unit, using the hexagonal bolts with washer base (M5 x 8). Determine the mounting location, and drill four mounting holes.
Hexagonal bolt with washer base (M5 x 8) Bracket (R) Bracket (L) 4 2 Attach bracket (L) and bracket (R) to each side of the unit, using the hexagonal bolts with washer base (M5 x 8). Mount the unit in place, using four self-tapping screws (M5 x 12). Use RTV (silicone sealer) on screw threads or around the holes to prevent moisture intrusion.
4 2 Attach bracket (L) and bracket (R) to each side of the unit, using the hexagonal bolts with washer base (M5 x 8). Mount the unit in place, using four self-tapping screws (M5 x 12). Use RTV (silicone sealer) on screw threads or around the holes to prevent moisture intrusion.
VEHICLE WIRING DIN cable (8-pin) CD changer Car Stereo with CD Changer Controls 6 Mating 8-pin DIN socket on rear of compatible radio chassis (see note 1 below). NOTE: 1. Check with your Audiovox car audio dealer to be sure your stereo is directly compatible with this CD changer.
© 1999 AUDIOVOX CORP., HAUPPAUGE, NY Printed in China 128-5542.
An important point after buying a device Audiovox SP-10CD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox SP-10CD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox SP-10CD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox SP-10CD you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox SP-10CD will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox SP-10CD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox SP-10CD.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox SP-10CD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox SP-10CD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center