Instruction/ maintenance manual of the product 920LM Samsung
Go to page of 48
Install drive rs SyncMaster 920LM.
Notation al Failure t o follow d irections n oted by this s ymbol cou ld result in bodily harm o r damage to the e quipment. Prohibited Important to read and u nderstand at all times Do not disassembl.
Do not use a damaged or loose plug. z This ma y cause e lectric sh ock or fire. Do not pull the plug out by the w ire nor touch the p lug with wet hand s. z This ma y cause e lectric sh ock or fire. Use only a p roperly grounded plug and re ceptacle. z An improp er ground may cause el ectric sho ck or equip ment damage.
Installation Be sure to contact an au thorized Serv ice Center , when ins talling yo ur monitor in a locati on with h eavy dust, high or low te mperature s, high humidi ty, and exposed to chem ical substanc es and where it operat es for 24 hou rs such as at airports, trai n st ati ons etc .
Keep a ny heating devic es away from the power cable . z A melted coating may lead to electric sho ck or fire. Do not install the product in plac es with poor ve ntilation, for instance, a bookshelf, close t, etc. z Any incre ase in the internal tem perature may ca use fire.
a sligh tly mo istened, so ft fabric. Do not spray water o r detergen t directly o nto the monitor. z This ma y cause d amage, elec tric shoc k or fire. Use the recommended de tergent with a sm ooth cloth. If the conne ctor between the plug and the pin is dusty or dirty, c lean it properly using a dry cloth.
unusual so und or smell com ing from the monitor - unplug it immedi ately and contac t an authorized de aler or the Ser vice Center . z This ma y cause e lectric sh ock or fire. Keep the produc t away from pla ces exposed t o oil, smoke or m oisture; do not insta ll inside a veh icle.
Never insert any thing metallic i nto the monitor openings . z This ma y cause e lectric sh ock, fire or injury. Do not in sert metal objects such as chop sticks, wire an d tools or inflammabl e objects such as paper or m atches into the vent, headphone port or AV ports or etc.
connected to other devices, are disconnected before moving the monitor. z Failure t o disconne ct cables may damag e it and ca use fire or electric shock. Place the pr oduct out of ch ildren's reac h, as they coul d damage by hanging onto it. z A falling product may cause in jury to the p erson or eve n fatality.
Please mak e sure the following items ar e included with y our monitor. If any items are missi ng, contact you r dealer . Contact a loc al deale r to bu y o p tional i tems.
Quick Setup Guide Warranty Card/ Registration Card (Not av ailable in all locati ons) User's Guide, Monitor Driver Cab le D-sub Cable Power Cord A udio Ca ble Fron t MENU button [MENU/ ] Opens the OSD menu. Also use to exit the OSD menu or return to the p revious me nu.
3) Intern et For wo rking with a m ixture of imag es such as text and graph ics. 4) Gam e For watc hing motion pi ctures suc h as a game. 5) Sport For watc hing motion pi ctures suc h as a spo rt. 6) Mov ie For watc hing motion pi ctures suc h as a DVD o r Video CD.
AUDIO IN Connec t the audio cable for your m onitor to the audio port o n the back of your c omputer. Kensington Lo ck The Ke nsington lo ck is a d evice use d to physic ally fix the system when u sing it in a public pl ace. (The lo cking dev ice has to be purchas ed separately.
Connecting the Monitor 1. Connec t the power co rd for your m onitor to the power port on the back of th e monitor. Plug the p ower cord for th e monitor in to a nearby o utlet. 2. Use a connection ap propriate for y our computer . 2-1. Using the D-sub (Analog) c onnector on the video c ard.
Monitor Ass embl y Monitor and Bottom Attachi ng a Base This mo nitor accep ts a 75 mm x 75 mm VESA-com pliant mou nting interfa ce pad. Simple stand A. Monitor B. Mounting interfa ce pad (Sold separately) 1. T urn off your m onitor and u nplug its p ower cord.
specif ied wall mou nt is used or the consu mer fails t o follow t he product in stalla tion instr ucti ons . z To mount the mon itor on a wall , you shoul d purchase the wall mounting k it that allows you to mount the monitor at leas t 10cm away from the wall surface.
5. Monitor driver insta llation is completed. Installing th e Monitor Drive r (Manual) Window s Vista | Window s XP | Window s 2000 | Wind ows ME | Window s NT | Lin ux When pro mpted by the ope rating system for th e monitor drive r, insert the CD -ROM included w ith this monitor.
5. Clic k " Properties " in the " Monitor " tab . If the " Prop erties " button is deactiv ated, it means t he configura tion for your monito r is compl eted. The mo nitor can be used as i s. If the message “ W indows needs… ” is d isplayed, as shown in the figure be low, click " Continue ".
9. Se lect the m odel that ma tches you r monitor from the list of monitor mo dels on the screen, and cli ck " Next ". 10. Clic k " Close " → " Close " → " OK " → " OK " on the following screens d isplayed in sequenc e.
3. C lic k " Display " icon and choose the " Settings " tab then c lick " Advanc ed.. ". 4. C lic k the " Properties " bu tton on th e " Monitor " tab and selec t " Driver " tab. 5. C lic k " Update Driver.
7. C lic k the " Browse " button then choose A:(D:D river) and choo se your monitor mo del in the model l ist and click the " Next " button. 8. If yo u can see following " M essage " wind ow, then clic k the " Continue Anyway " button.
10. Monitor driver insta llation is completed . Microsoft ® Windows ® 2000 Op erating Syste m When you c an see "Digital Signature Not Fou nd" on your monitor, follow th ese steps. 1. Choos e " OK " button on th e " Insert d isk " window .
frequ ency by referrin g to the Prese t Timing Mo des in t he user guid e. Linux Operating System To e xecute X-W indow, you ne ed to make the X86Con fig file, w hich is a typ e of system setting file. 1. Press Ente r at the first a nd the second screen after executing the X86Conf ig file.
1. [MENU/ ]Use t his button t o open the on-s creen menu an d exit fr om the menu screen or clos e screen a djustment menu. 2. [ ]These b uttons allo w you to a djust item s in the me nu. 3. [ ]Press thi s button to act ivate a highlighted menu item .
Menu Descripti on AUTO When the ' AUTO ' button is pressed, th e Auto Adj ustment screen appears as shown in the a nimated screen on the cen ter. Auto adjus tment allo ws the monit or to self-a djust to the incoming video signal. The values of fine, co arse and pos ition ar e adjusted automatica lly.
When p ressin g the MENU button afte r lockin g the OSD Menu Descripti on OSD Lock & Unlock This is the functio n that lock s the OSD in order to keep the current s tates of settings or prevent o thers from a djusting th e current set tings.
Magic Bright™ Menu Descripti on MagicBright™ Push the MagicBri ght button to circle through ava ilable preconfi gured modes . - Si x different mod es (Custom/Te xt/Intern et/Game/Sport/M ovie) Volume Menu Descripti on Volume When OSD is not on the screen , push the bu tton to adju st volume.
Picture Brightness Contr ast Color Color Tone Color Co ntr ol Gamma Image Coa rse Fine Sharpn ess H-Po sitio n V-Position OSD Language H-Po sitio n V-Po si tio n Transparenc y Di spla y Time Setup Ima.
Menu Descripti on Play/Stop Color Tone The t one of the co lor can be c hanged and one of four modes can b e se lec ted - C ool, N orm al, Warm and Custom. [ME NU → , → → , → → , → MENU ] Cool - M akes white s bluish. Normal - Keeps whites wh ite.
Menu Descripti on Play/Stop Coarse Remov es noise suc h as vertical stripes. C oarse adjustm ent may m ove the sc reen image area. You may relocate it to the ce nter using th e horizonta l control m enu. [ME NU → , → → → , → MENU ] Fine Remov es noise suc h as horiz ontal stripe s.
Menu Descripti on Play/Stop Language You can c hoose one of 9 languag es. Note :The lang uage chos en affects o nly the lan guage of the OSD . It has no e ffect on any s oftware running on the compute r. [ME NU → , → → → , → MENU ] H-Position You can c hange the h orizontal po sition where the OSD menu ap pears on yo ur monitor.
Menu Descripti on Play/Stop Image R eset Image pa rameters are repl aced with the factory defa ult values . [ME NU → , → → → , → MENU ] Color R eset Color p arameters are rep laced with th e factory de fault values .
Menu Descripti on Info rm at ion Shows a video sou rce, displ ay mode on the OSD s creen. [ME NU → , → MENU ].
Check List Before cal ling for ser vice, chec k the inform ation in th is section to see if you can remedy any probl ems yourself. If you do ne ed assist ance, please c all the p hone numbe r on the Informati on section or contact you r dealer . Symptom Check List Solutions No im ages on the screen.
"Not Optimu m Mode", "Reco mmended Mode 144 0 X 900 60 H z" message a ppears for one min ute and then disappears . Please c hange to the reco mmended mode during th is one -minu te pe ri od. ( The mes sage is dis played agai n if the sy stem is reboo ted.
"Unrec ognized monitor, Plug & Play (VESA DDC) monitor found ". Inst ructions . See the v ideo card m anual to se e if the Plug & Pl ay (VESA DDC) function can be su pported. Inst all the monitor driver acco rdin g to th e Driver Installatio n Inst ructions .
Self-Test Featur e Check Self-Test Feature Ch eck | Warning Messag es | Environm ent | Usefu l Tips Your moni tor provides a self test feature t hat allows yo u to check wh ether your mon itor is functio ning properly. Self-Test Featur e Check 1. Turn off bo th your com puter and the monitor.
900 60 H z" messa ge comes up, disconnec t the cable from the com puter while th e monitor is still powe re d on. { If the re is a mes sage coming up on the sc reen or if the screen goe s white, t his means the monitor is in working condition. { In this c ase, chec k the compute r for troubl e.
Gene ral General Model N ame SyncMas ter 920LM LCD Pan el Size 19 " Wi de D ia gonal (4 8 cm) Displ ay area 410.4 mm (H) x 256. 5 mm(V) Pixel Pitc h 0.285 mm (H) x 0.285 m m (V) Synchronizat ion Horizo ntal 30 ~ 81 k Hz V e rti c al 5 6 ~ 75 H z Disp lay C ol or 16.
VESA Mounting Int erface 75 mm x 75 mm (For use with Spec ialty(Arm) Mo unting hardware .) Environm ental consideratio ns Operati ng Temperat ure : 32°F~104°F (0 ℃ ~ 40 ℃ ) Humid ity : 20% ~ 80%.
Preset Timin g Modes If the signal tran sferred from the compute r is the sam e as the follow ing Preset T iming Mod es, the screen wi ll be adjus ted automat ically. How ever, if th e signal differs , the scree n may go bl ank while the pow er LED is on.
Cont act SAMS UNG WORLDWI DE If you have any quest ions or comments relati ng to Samsung produ cts, please contact the SAMSUNG custom er care center . North America U.S.A 1-800-SAMSUNG (7 267864) http: //www.samsung.com CANADA 1-800-SAMSUN G (7267864) http: //www.
BELGIUM 02 201 24 18 http://www.sam sung.com/be CZECH REPUBLIC 844 000 844 http://www.sam sung.com/cz DENMARK 70 70 19 70 http://www.sam sung.com/dk FINLAND 030-6227 515 http://www.sam sung.com/fi FRANCE 3260 SAMSUN G(7267864) (€ 0,1 5/m in) http://www.
PHILIPPINES 1800-10-SAM SUNG (7267864) http://www.sam sung.com/ph SINGAPORE 1800-SAMSUNG (7 267864) http://www.samsu ng.com/sg THAILAND 1800-29-3 232, 02-689-3 232 http://www.samsung.c om/th TAIWAN 0800-3 29-999 http://www.samsu ng.com/tw VIETNAM 1 800 588 889 http://www.
1. Adjust c omputer reso lution and s creen injecti on rate (refres h rate) oncom puter as des cribed below to enjoy the best quali ty of pictu re. You can ha ve an unev en quality of picture i n the screen i f the best q uality of pi cture is no t provided i n TFT-LCD.
PRODUCT INFORMATION (Image Retention Free) LCD Mon itors and TVs may have image reten tion when sw itching fro m one image to another especi ally after d isplaying a stationary im age for a lo ng time. This gui de is to de monstrate c orrect usage of L CD products in order to p rotect them from Image rete nti on.
Ex) The best w ay to protect you r monitor from Im age retention is to set your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image ret ention may not occur wh en a LCD pan el is operat ed under norm al conditi ons.
Correct Disposal of This Product (Waste Electrical & E lectronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection s ystems) This mar.
An important point after buying a device Samsung 920LM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung 920LM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung 920LM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung 920LM you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung 920LM will certainly help you make a decision on the purchase.
If you already are a holder of Samsung 920LM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung 920LM.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung 920LM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung 920LM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
