Instruction/ maintenance manual of the product 760TFT Samsung
Go to page of 70
SyncMaster 760TFT/760VTFT/171V.
Main Pa ge On-Sc reen Displa y Safety Instr uctions Troubl eshootin g Notational Che ck List Pow er Q & A Installation Self- Test Fea ture Chec k Cleaning Other Introduct ion Specifications Unpa c.
Notational Pow er Installation Clean Other Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Proh ibit ed Important to read and understand at all ti.
Notational Powe r Installation Clean Other When not used for extended peri ods of time, set your PC to D PMS. If using a screen sa ver, set it to the act ive screen mode. Do not use a damaged or loo se plug. z This may cause an electric shock or fire.
Notational Pow er Installation Clean Other Do not c over the vents o n the monito r cabinet. z Bad ventilation may cause a breakdown or fire. Put y our moni tor i n a l ocation with lo w hum idity and a m inimum of dust . z An electric shock or fire could resul t inside the monitor.
Notational Pow er Installation Clean Other When cleaning the monitor case or the surface of t he TFT-LCD, wipe with a slightly moistened, soft fabric. Do not s pray detergent di rectly on the monitor. Use the recommended detergent with a smooth cloth.
Notational Pow er Installation Clean Other Do not remove cover(or back). No user serviceable parts i nside. z This may cause an electric shock or a f ire.
Unparking Front Rear Power Cord Signal Cable Quick Setup Guide Warranty Card (Not available in all locations) User's Guide and Driver Installation CD Monitor and Stan d Pivot Stand and S/W CD(Option) Please make sure the following items are included with your monitor.
Unpacking Front Rear Monitor and Stand Please make sure the following items are included with your monitor. If any items are missing, contact your dealer .
Unparking Front Rear 1. Auto button Use this button to auto adjustment direct access. 2. Exit button Use this button to Exit the active menu or the OSD. 3. Power button Use this button to turn the monitor on and off. 4. Power indicator This light glows green during normal operation, and blinks green once as the monitor saves your adjustments.
Unpacking Front Rear 1. Auto button Use this button to auto adjustment direct access. 2. Exit button Use this button to Exit the active menu or the OSD. 3. Adjust buttons These buttons allow you to highlight and adjust items in the menu. 4. Menu button Use this button to open the OSD and activate a highlighted menu item.
Unparking Front Rear (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the power cord for your monitor to the power port on the back of the monitor. 2. Signal port Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
Unpacking Front Rear (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the power cord for your monitor to the power port on the back of the monitor. 2. Signal port Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
Connecting Your Monitor Installing the Monitor Driver Installing VESA compliant mounting 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.. 2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
Connecting Your Monitor Installing the Monitor Driver Installing VESA compliant mounting 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.. 2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions as appropriate for the operating system you have.
4. Click the " Install " button in the " Warning " window. 5. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certifying MS logo,and this installation don't damage your system.
Windows XP | Windows 2000 | Windows Me | Windows 98 | Windows 95 | Windows NT | Linux When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another.
5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " button. 6. Select " Don't search ,I will.. " then click " Next " and then click " Have disk ". 7.
10. Monitor driver installation is completed. Microsoft ® Windows ® 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose " OK " button on the " Insert disk " window.
Microsoft ® Windows ® 95 Operating System First determine the Windows 95 version installed on your computer by right-clicking the My Computer icon on PC and selecting Properties. The version number is listed under System. Perform the steps for the appropriate version.
Connecting Your Monitor Installing the Monitor Driver Installing VESA compliant mounting Removing the base | Attaching a base Removing the base 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.
Connecting Your Monitor Installing the Monitor Driver Installing VESA compliant mounting Removing the base | Attaching a base Removing the base 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.
Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with the four screws that came with the arm-type base, wall mount hanger or other base.
On-Sc reen Di splay 1. Use this button to open the OSD and activate a highlighted menu item. 2.3 Use these buttons to highlight and adjust items using the On Sc reen Display. These b uttons are also di rect access buttons f or the br ightness feature.
On-Sc reen Di splay Adjust th e Brightness. 1. Push the Menu ( ) butto n. 2. Push the Menu ( ) butto n to open the Brig htness adjustm ent scree n. 3. Use the + butto n to i ncrease the brightne ss or - button to decrease th e brightness. Direct A ccess Fea ture : When OS D is not on the screen, Push t he + or - button to adjust brig htness.
On-Sc reen Di splay Image Lock is used to fine tune and get the best image by removing noise s that crea tes unst able images with jitters and shimme rs. If satisfac tory results are not obtained using the Fine adjustme nt, use the Coarse adjustment and then use Fine again.
On-Sc reen Di splay Follow these instructions to cha nge the horizontal position of the monitor's entire di splay. 1. Push the Menu ( ) butto n. 2. Push the - button or + bu tton until the Posi tion scree n is displayed. 3. Push the Menu ( ) butto n twice to open the H-Position adjustme nt screen.
On-Sc reen Di splay Geometry parameters ar e replac ed with the factory default val ues. 1. Push the Menu ( ) butto n. 2. Push the - but ton or + button u ntil the Reset scre en is displayed. 3. Push the Menu ( ) butto n twice to open the Geometr y Reset a djustment screen.
On-Sc reen Di splay Color temperature is a measure of the "warmth" of the image colors. 1. Push the Menu ( ) butto n. 2. Push the - bu tton or + but ton until the Color Temperat ure screen is displaye d. 3. Push the Menu ( ) butto n to open the Color Te mperat ure adj ustment screen.
On-Sc reen Di splay Image being dis played can be made softer or sharper. 1. Push the Menu ( ) butto n. 2. Push the - but ton or + bu tton unti l the Image E ffect screen is displaye d. 3. Push the Menu ( ) butto n to open the Ima ge Effect adjustm ent scree n.
On-Sc reen Di splay Change the opaqueness of the background of the OSD. 1. Push the Menu ( ) butto n. 2. Push the - but ton or + button u ntil the Menu Halfton screen is displaye d. 3. Push the Menu ( ) butto n to o pen the M enu Ha lfton selection screen.
On-Sc reen Di splay You can change the horizontal position where the OSD menu appears on your monitor. 1. Push the Menu ( ) butto n. 2. Push the - but ton or + bu tton u ntil the H-Menu P osition screen is displaye d. 3. Push the Menu ( ) butto n twice to open the H-Position adjustme nt screen.
On-Sc reen Di splay The menu will a utomatica lly turn off if no adjustme nts are made for a certain time period. You can set the amount of ti me the menu will w ait before it turns off. 1. Push the Menu ( ) butto n. 2. Push the - bu tton or + b utton unti l the Menu D isplay Tim e screen is displaye d.
On-Sc reen Di splay Auto adjust ment allows the monitor to s elf-adjust to the incoming video si gnal. The values of fine, coarse and position are adjusted automat ically. 1. Push the Auto butto n. To make t he autom atic adj ustment function sharper, execute the 'AUTO' function while the AU TO PATTERN is on.
User’s Manual On-Sc reen Di splay 1. Use this button to open the OSD and activate a highlighted menu item. 2.3 Use these buttons to highlight and adjust items using the On Sc reen Display. These b uttons are also di rect access buttons f or the br ightness feature.
User’s Manual On-Sc reen Di splay Adjust th e Brightness. 1. Push the Menu ( ) butto n. 2. Push the Menu ( ) butto n to open the Brig htness adjustm ent scree n. 3. Use the + butto n to i ncrease the brightne ss or - button to decrease th e brightness.
User’s Manual On-Sc reen Di splay Image Lock is used to fine tune and get the best image by removing noise s that crea tes unst able images with jitters and shimme rs. If satisfac tory results are not obtained using the Fine adjustme nt, use the Coarse adjustment and then use Fine again.
User’s Manual On-Sc reen Di splay Follow these instructions to cha nge the horizontal position of the monitor's entire di splay. 1. Push the Menu ( ) butto n. 2. Push the - button or + bu tton until the Posi tion scree n is displayed. 3. Push the Menu ( ) butto n twice to open the H-Position adjustme nt screen.
User’s Manual On-Sc reen Di splay Geometry parameters ar e replac ed with the factory default val ues. 1. Push the Menu ( ) butto n. 2. Push the - but ton or + button u ntil the Reset scre en is displayed. 3. Push the Menu ( ) butto n twice to open the Geometr y Reset a djustment screen.
User’s Manual On-Sc reen Di splay Color temperature is a measure of the "warmth" of the image colors. 1. Push the Menu ( ) butto n. 2. Push the - bu tton or + but ton until the Color Temperat ure screen is displaye d. 3. Push the Menu ( ) butto n to open the Color Te mperat ure adj ustment screen.
User’s Manual On-Sc reen Di splay Image being dis played can be made softer or sharper. 1. Push the Menu ( ) butto n. 2. Push the - but ton or + bu tton unti l the Image E ffect screen is displaye d. 3. Push the Menu ( ) butto n to open the Ima ge Effect adjustm ent scree n.
User’s Manual On-Sc reen Di splay Change the opaqueness of the background of the OSD. 1. Push the Menu ( ) butto n. 2. Push the - but ton or + button u ntil the Menu Halfton screen is displaye d. 3. Push the Menu ( ) butto n to o pen the M enu Ha lfton selection screen.
User’s Manual On-Sc reen Di splay You can change the horizontal position where the OSD menu appears on your monitor. 1. Push the Menu ( ) butto n. 2. Push the - but ton or + bu tton u ntil the H-Menu P osition screen is displaye d. 3. Push the Menu ( ) butto n twice to open the H-Position adjustme nt screen.
User’s Manual On-Sc reen Di splay The menu will a utomatica lly turn off if no adjustme nts are made for a certain time period. You can set the amount of ti me the menu will w ait before it turns off. 1. Push the Menu ( ) butto n. 2. Push the - bu tton or + b utton unti l the Menu D isplay Tim e screen is displaye d.
User’s Manual On-Sc reen Di splay Auto adjust ment allows the monitor to s elf-adjust to the incoming video si gnal. The values of fine, coarse and position are adjusted automat ically. 1. Push the Auto butto n. To make t he autom atic adj ustment function sharper, execute the 'AUTO' function while the AU TO PATTERN is on.
Check List Q & A Self-Test Feature Check Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the Information section or contact your dealer .
The screen is out of focus or OSD cannot be adjusted. Have you adjusted the resolution or frequency on the monitor? Adjust the resolution and frequency of the video card. (Refer to the Preset Display Modes ). LED is blinking but no images on the screen.
Check List Q & A Self-Test Feature Check Question Answer How can I change the frequency? Frequency can be changed by reconfiguring the video card. Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.
Check List Q & A Self -Test Feature Check Self-Te st Fea ture Chec k | Warning M essages | Enviro nment | U seful Tips Your monitor provides a self test feature that allows you to check whether your monitor is functioni ng properly. 1. Turn off both your computer and the monitor.
z A monitor recr eates visual signals r eceived from the PC . Therefore, if there is trouble w ith the PC or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact a service center or your dealer.
General PowerSaver Preset Timing Modes General Model Name SyncMaster 760TFT LCD Panel Size 17.0 inch diagonal Display area 337.92 (H) x 270.336 (V) Pixel Pitch 0.264 (H) x 0.264 (V) Type a-si TFT active matrix Viewing Angle 75/75/70/70(L/R/T/B),Typical Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 76 Hz Display Color 16.
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 99.999% above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness.
General PowerSaver Preset Timing Modes General Model Name SyncMaster 760VTFT LCD Panel Size 17.0 inch diagonal Display area 337.92 (H) x 270.336 (V) Pixel Pitch 0.264 (H) x 0.264 (V) Type a-si TFT active matrix Viewing Angle 75/75/70/70(L/R/T/B),Typical Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 76 Hz Display Color 16.
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 99.999% above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness.
General PowerSaver Preset Timing Modes General Model Name SyncMaster 171V LCD Panel Size 17.0 inch diagonal Display area 337.92 (H) x 270.336 (V) Pixel Pitch 0.264 (H) x 0.264 (V) Type a-si TFT active matrix Viewing Angle 75/75/65/60(L/R/T/B),Typical Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 76 Hz Display Color 16.
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 99.999% above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness.
General PowerSaver Preset Timing Modes This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time.
General PowerSaver Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on.
Service U. S .A. : S a m s ung Co m put e r P r od u c t s C u s t om e r S e r v i c e 400 V a l l ey Roa d , S u i te 2 0 1, Mt. A r l i n gto n , N J 0 7 856 T el. : ( 97 3 ) 6 01 - 6 0 00, 1 - 80 0 - S A M SU N G ( 1 - 8 00 - 7 2 6 - 78 6 4) Fax. : ( 973)601-60 01 http://sams ungusa.
Service SOUTH AFRICA : Samsung Electroni cs,5 Lib ertas Road, S omerset Office Park, Bryanston Ext 16. P o Box 70006, Bryanston ,2021, South Af rica Tel : 002 7-11-549- 1621 Fax : 0027-11 -549-1629 http://www.sa msung.co.za/ UKRAINE : SAMSUN G ELECTRONI CS REPRES ENTATIVE OFFICE IN UKRAIN E 4 Glyb ochitska s tr.
Serv ice Ter ms Regulatory Natural Color For Better Display Auth ori ty Dot Pitch The image on a monitor is composed of red, gr een and blue d ots. The closer th e dots, the higher the resolution. The distance between two dots of the same color is cal led the 'Dot Pitch'.
Serv ice Term s Regulatory Natural Color For Better Display Auth ori ty FCC Information | IC Compliance Notice | MPR II Complianc e Europe an Noti ce (Europ e only) | PC T Noti ce | TCO'95 -Ecolo.
MPR II Compl iance This monitor complies with SWEDAC(MPR II) recommendations for reduced electric and magnetic fields . European Notice (Europe only) Products with the CE Marking comply with both the EMC Directive (89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Com munity.
The requirements cover a wide r ange of issues: environment , ergonomics, usability, em ission of electrical and magnetic fields, energy consumption and electrical and fire safety.
Congra tulations ! You have j ust purchased a TC O'99 approved and label led product! Your choi ce has provided you with a pr oduct developed for prof essional use. Your pur chase has also co ntributed to reducing the burden on the environment and also to the further development of envir onmentally adapted electronics products.
Mercury is sometimes found in batteries, relays and swi tches. It damages the nervous system and is toxic in high doses. The rel evant TCO'99 requirement states that batteries may not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit.
Serv ice Term s Regulatory Natur al Colo r For Better Display Auth ori ty Natural Color Software Program One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor.
Serv ice Term s Regulatory Natural Color For Bett er Disp lay Auth ori ty For Better Display 1. Adjust computer resolution and screen injection rate (refresh rate) in control panel of computer as described below to e njoy the best quality of picture.
Serv ice Term s Regulatory Natural Color For Better Display Auth orit y Information in this document is subject to change without notice. © 2002 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co.
An important point after buying a device Samsung 760TFT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung 760TFT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung 760TFT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung 760TFT you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung 760TFT will certainly help you make a decision on the purchase.
If you already are a holder of Samsung 760TFT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung 760TFT.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung 760TFT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung 760TFT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
