Instruction/ maintenance manual of the product 731BA, 931BA Samsung
Go to page of 53
Install drivers Install programs SyncMaster 731BA / 931BA.
Notation Failure to follow directions noted by this sym bol could result in bod ily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power Do not use a damaged or loose plug.
Do not pull the plug out by the wire nor touch the pl ug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electr ic shock or equipment damage. Insert the power plug firmly so that it does not come loose.
Installation Be sure to contact an authorized Service Center, when installing your monitor in a location with heavy dust, high or low temper atures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc.
Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc. Any increase in the internal temperature may cause fire. Put down the monitor carefully. Failing to do so may damage the monitor. Do not place the monitor face down.
Do not spray water or detergent directly onto the monitor. This may cause damage, electric shock or fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or di rty, clean it properly using a dry cloth.
If your monitor does not operate normally - in particular, if there are any unusual sound or smell coming from it - unplug it immediately and the Service Center . This may cause electr ic shock or fire. Keep the product away from pl aces exposed to oil, smoke or moisture; do not install inside a vehicle.
This may cause an explosion or fire. Never insert anything metallic into the monitor openings. This may cause electric shock, fire or injury. Do not insert metal objects such as chopsti cks, wire and tools or inflammable objects such as paper or matches into the v ent, headphone port or AV ports or etc.
Failure to disconnect cables may damage it and cause fire or electric shock. Place the product out of children's reach, as they could damage by hanging onto it. A falling product may cause injury to the person or even fatality. When not using the product for an ex tended period of time, keep the product unplugged.
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
PRODUCT INFORMATION (I mage Retention Free) LCD Monitors and TVs may have a n image retent ion when swi tching from one image to an other especially after displaying a statio nary image for a long time. This guide is to demonstrate a corre ct usage of LCD products in order to prote ct them from Image retention.
Ex) The best way to prote ct your monitor from Image retention i s to set your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is opera ted under normal conditio ns. Normal conditions are defined as continuously changi ng video patterns.
Features Anion Monitor The anion generator emit s up to 50,000 anions. The anion monitor emits up to 50,0 00 anions, which is equal to the nu mber of anions emitted by 40 sanseverias, which generate the most anions among plants. LED (Operating Light) Anion Emission Hole Anion Off/On Selecting 'Off/On' Anion is possibl e through the OSD.
Monitor With Stand Monitor & Simple stand Manual Quick Setup Guide Warranty Card (Not available in all locations) User's Guide, Monitor Driver, Natural Color software, MagicTune™ software C.
MENU button [ ] Opens the OSD menu. Also use to ex it the OSD menu or return to the previous menu. MagicBright™ button [] MagicBright™ is a new featur e providing optimum viewing environment depending on the contents of the image you are watching.
Enter button [ ] / SOURCE button Activates a highlighted menu item. / Push the 'SOURCE', then selects the video signal while the OSD is off. (When the source button is pr essed to change the input mode, a message appears in the upper left of the screen displaying the current mode -- analog or digi tal input signal.
Connectin g Cables Connect th e power cord for yo ur monitor to the power port on th e back of the monit or. Plug the power cord for the m onitor into a nearby outlet. Use a connec tion appr opriate for your computer . Using the D-sub (A nalog) conne ctor on the vi deo card.
Monitor Assembl y This moni tor accepts a 7 5 mm x 75 mm VESA-c ompliant moun ting inter face pad. Attachin g a Base A. Monitor B. Mounting i nterface pad (S old separate ly) Turn off you r monitor and un plug its power cord . Lay the LCD mo nitor face-dow n on a flat su rface with a cus hion benea th it to protect the screen.
Monitor Driver When prompted by th e operating sy stem for the mo nitor driver, inse rt the CD-ROM i ncluded with thi s monitor. Driver ins tallation is sl ightly differen t from one op erating system to another. Follow the directions a ppropriate for the operating sy stem you hav e.
This monitor driv er is under certifying MS logo, and this installation doesn 't damage your system. The certi fied driver wi ll be post ed on Samsung Mon itor homepa ge http://www.
Select "Don't se arch ,I will." then cl ick "N ext" and then click "Ha ve disk". Click the "Bro wse" button then c hoose A:(D:D river) and ch oose your mo nitor model in the mode l list and click the "Next" bu tton.
Monitor driver installation is completed . Micros oft ® Windows ® 2000 Opera ting System When you can see "Digital Signature Not Found" on yo ur monitor, follow these steps. How to inst all Choose the "OK " button on the "Insert disk" window.
Select "Show all devices " and choose th e monitor that c orresponds to the one you conn ected to your computer an d click "OK". Continue cho osing "Close" b utton and "OK" but ton until you c lose the Disp lay Propert ies dialogue box.
Research Institute (ETRI). This is only a vailable for S amsung monito rs and en sures th at the color of the image s on the monitor are the s ame as the prin ted or scanne d images. For more info rmation, refer t o Help (F1) in the software prog ram.
Hardware z 32MB Memory abov e z 60MB Hard disk space above * For more information, visit the MagicTun e™ website . Uninstall The MagicTu ne™ program ca n be remo ved only by usin g the "Add o r Remove Pr ograms" opti on of the Windows® Control P anel.
Control Buttons [MENU / ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. [ ] These buttons allow you to adjust items in the menu.
Menu Description AUTO When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming Analog signal. The values of fine, coarse and pos ition are adjusted automatically.
Menu Description OSD Lock & Unlock After pushing the "MENU" button more t han 5 seconds, OSD function is locked (unlocked). You can also adjust the brightness a nd contrast of the monitor with the OSD adjustment locking feature.
Menu Description MagicBright™ Push the MagicBright™ button to ci rcle through available preconfigured modes. - Six different modes (Custom/ Text/Internet/Game/Sport/Movie) Brightness Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness.
Menu Description SOURCE Selects the Video signal while the OSD is off. (Analog/Digital) OSD Function Picture Brightness Contrast Color MagicColor Color Tone Color Control Gamma Image Coarse Fine Sharp.
Menu Description Play/Stop Brightness You can use the on-screen menus to change the brightness according to personal preference. Direct Access Feature : When OSD is not on the screen, push the button to adjust brightness.
Menu Description Play/Stop MagicColor MENU → , → → → , → MENU MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without di sturbing image quality. Off Returns to the original mode.
Coarse menu. MENU → , → → → , → MENU Fine Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after adjusting the frequency (clock speed). MENU → , → → , → → , → MENU Sharpness Changes the clearance of image.
V-Position appears on your monitor. MENU → , → → , → → , → MENU Transparency Change the transparency of the background of the OSD. MENU → , → → , → → , → MENU Display Time The menu will be automatically tu rned off if no adjustments are made for a ceAnionin time period.
Menu Description Information Shows a video source, displa y mode on the OSD screen. MENU → ,.
Check List Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do ne ed assistance, please call the phone number on the Information section or contact your dealer . Symptom Check List Solutions No images on the screen.
indicator on the monitor blinking at 1 second intervals? restore the image on the screen. If there is still no image, pr ess the 'SOURCE' button. Then press any key on the keyb oard again to activate the monitor and restore the image on the screen.
reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found". See the video card manual to see if the Plug & Play (VESA DDC) function can be supported. Install the monitor driver according to the Driver Installation Instructions .
Set the resolution in the Control Panel → Display → Settings. Contact the video card manufacturer for details. How can I set the Power Saving function? Windows XP : Set the resolution in the Control Panel → Appearance and Themes → Display → Screen Saver.
Environment The location and the position of the monitor may influence the qua lity and other features of the monitor. If there are any sub woofer speak ers near the monitor, unplug and re locate the woofer to another room. Remove all electronic devices such as radios, f ans, clocks and telephones that are within 3 feet (one meter) of the monitor.
Specifications General Model Name SyncMaster 731BA LCD Panel Size 17 " Diagonal (43 cm) Display area 337.92 mm (H) x 270.336 mm (V) Pixel Pitch 0.264 mm (H) x 0.264 mm (V) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.
15pin to 15pin D-sub cable, Detachable, DVI-D to DVI-D connector, Detachable,(Option) Dimensions (W x H x D) / Weight 380.0 x 325.0 x 57.3 mm / 14. 9 x 12.8 x 2.2 inch (Wit hout Stand) / 3.25 kg 380.0 x 384.8 x 202.2 mm / 15.0 x 15.1 x 7.9 inch (With Stand) / 3.
PowerSaver (Anion) State Normal Operation Anion 'On' Normal Operation Anion 'Off' Power off (Power button) EPA/ENERGY 2000 Power Indicator Blue Black Black Power Consumption Less t.
VESA 1280 x 960 60.000 60.000 108.00 +/+ VESA, 1280 x 1024 63.981 60.020 108.00 +/+ VESA, 1280 x 1024 79.976 75.025 135.00 +/+ Horizontal Frequency The time to scan one line connecting t he right edge.
Specifications General Model Name SyncMaster 931BA LCD Panel Size 19 " Diagonal (48 cm) Display area 376.32 mm (H) x 301.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.
15pin to 15pin D-sub cable, Detachable, DVI-D to DVI-D connector, Detachable,(Option) Dimensions (W x H x D) / Weight 422.7 x 360.2 x 62.5 mm / 16. 6 x 14.1 x 2.4 inch (Wit hout Stand) / 4.8 kg 422.7 x 427.9 x 219.3 mm / 16.6 x 16.8 x 8.6 inch (With Stand) / 5.
PowerSaver (Anion) State Normal Operation Anion 'On' Normal Operation Anion 'Off' Power off (Power button) EPA/ENERGY 2000 Power Indicator Blue Black Black Power Consumption Less t.
VESA 1280 x 960 60.000 60.000 108.00 +/+ VESA, 1280 x 1024 63.981 60.020 108.00 +/+ VESA, 1280 x 1024 79.976 75.025 135.00 +/+ Horizontal Frequency The time to scan one line connecting t he right edge.
Contact SAMSUNG WO RLDWIDE If you have any questions or comm ents relati ng to Sa msung products, ple ase contact the SAMSUNG customer care center . North America U.S.A 1-800-SAMSUNG (726786 4) http://www.samsung. com CANADA 1-800-SAMSU NG (7267864) http://www.
BELGIUM 02 201 2418 http://www.samsung. com/be CZECH REPUBLI C 844 000 844 http://w ww.samsung.com/ cz DENMARK 70 70 19 70 http://www.samsung. com/dk FINLAND 030-622 7 515 http://www.samsung. com/fi FRANCE 326 0 SAMSUNG(72678 64) (€ 0,15/min) http://www.
INDIA 3030 8282, 18 00 1100 11 http://www.samsung. com/in INDONESIA 0800-112 -8888 http://www.samsung.com/ id JAPAN 0120-327 -527 http://www.samsung.com/jp MALAYSIA 1800 -88-9999 http://www.samsung.com/ my PHILIPPINES 1800-10-SAMSUNG (72678 64) http://w ww.
The number of horizontal a nd vertical d ots used to co mpose the scre en image is called the 'resolution'. This n umber shows the accuracy of the display . A high resolu tion is good fo r performing multiple tasks as m ore image informatio n can be shown on the screen.
MÉXICO IMPORTADO POR: SAMSUNG ELECTRON ICS MÉXICO. S.A. de C.V. Vía Lopez Po rtillo No. 6, Col. San Fco. Chilpan Tultitlán, E stado de M éxico, C.
An important point after buying a device Samsung 731BA, 931BA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung 731BA, 931BA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung 731BA, 931BA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung 731BA, 931BA you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung 731BA, 931BA will certainly help you make a decision on the purchase.
If you already are a holder of Samsung 731BA, 931BA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung 731BA, 931BA.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung 731BA, 931BA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung 731BA, 931BA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
