Instruction/ maintenance manual of the product 710T, 910T, 710N, 910N, 510T, 510N, 512N, 515V, 915V, 712N, 912N, 711T, 912T, 913N, 701T Samsung
Go to page of 83
SyncMaster 710T / 910T / 710N / 910N / 510T / 510N / 512N / 515V / 915V / 712N / 912N / 711T / 912T / 913N / 701T.
Failure to fol low directions no ted by this symb ol could result in bodi ly harm or damage to equipment. Prohibited Important to read and un derstand at all times Do not disassemble Disconnect the pl.
Do not pull the plug out by the wire nor touch the plug with wet hands. z This may cause an el ectric shock or fir e. Use only a p roperly grounde d plug and r eceptacle. z An improper ground ma y cause electri c shock or equipm ent damage. Do not excessively bend the plug an d wir e nor place heavy objects upon them, which could cause damage.
Set down the monitor carefully. z It could be damaged or broken. Do not place the monitor face down. z The TFT-LCD surface may be damaged. Installing a wall bracke t must be done by a qualified pr ofessional. z Installation by unq ualified personnel m ay result in injur y.
Contact a Ser vice Center or Customer Center for interior cleani ng once a year. z Keep the product's interior clean. Dust which has accumulated in the in terior over an extended per io d of time may cause malfunction or a f ire. Other Do not remove cover (or back).
z This may cause a break down, electric sho ck or a fire due to damage to the cable. Do not cover the vents on the monitor cabinet. z Bad ventilation may cause a bre akdown or fire. Do not place water containers, chem ical products or small metal ob j ects on the monitor.
To ease eye strain, take at least a five-minute bre ak after every hour of using the monitor . Do not use the monito r where it can be e xposed to strong vibrations. z Exposure to strong v ibratio ns can be a fire hazard and shorten the life of the monitor.
Please make sure the following ite ms are inc luded with your monitor. If any items are missing, contact your dealer . Unpacking Option 1 Moniter & Si m p le st a nd Bottom Option 2 Monitor & .
Quick Setup Guide Warranty Card Dirver, Natural Color software, MagicTune™ software C D Cable D-Sub Cable Power Cord DVI Cable (op tion) Front 1. Menu button [ ] Opens the OSD menu. Also us ed to exit the OSD menu or return to the previous me nu. 2.
If this is the case, adjust the Brightness and Con t rast by using the OSD menu. 3. Brightness button [ ] When OSD is not on the sc reen, Push the button to adjust brightness. 2,3. Adjust buttons [ ] Adjust items in the menu. 4. Enter button [ ] / Source button Activate a highli ghted menu item.
SyncMaster 710T / 910T / 711T / 912T / 701T(Option) (The con figurat ion at the back of the monitor m ay v ary from produc t to produ ct.) 1. Power port Connect the power cord for your monito r to the power port on th e back of the moni to r. 2. DVI po rt Connect the DVI Cab le to t he DV I Port o n the b ack of your Monit or.
Please make sure the following ite ms are inc luded with your monitor. If any items are missing, contact your dealer . Unpacking Option 1 Moniter & Si m p le st a nd Bottom Option 2 Monitor & .
Quick Setup Guide Warranty Card Dirver, Natural Color software, MagicTune™ software C D Cable D-Sub Cable Power Cord Front 1. Menu button [ ] Opens the OSD menu.
If this is the case, adjust the Brightness and Con t rast by using the OSD menu. 3. Brightness button [ ] When OSD is not on the sc reen, Push the button to adjust brightness. 2,3. Adjust buttons [ ] Adjust items in the menu. 4. Enter button [ ] Activate a highli ghted menu item.
1. Connect the power cord for your monitor to the power po rt on the back of the monitor. Plug the power cord fo r the mo nitor into a nearby outlet. 2-1. Using the D-sub (Analog) conne c tor on the video card. Connect the signal cabl e to the 15-pin, D-sub connector on the back of your monitor .
1. Connect the power cord for your monitor to the power po rt on the back of the monitor. Plug the power cord fo r the mo nitor into a nearby outlet. 2-1. Using the D-sub (Analog) conne c tor on the video card. Connect the signal cabl e to the 15-pin, D-sub connector on the back of your monitor .
M o nitor a n d Bottom Pivot Stand Attaching a base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad. SyncMaster 510T / 510N / 512N /515V 701T.
Simple stand Pivot stand A. Monitor B. Mounting interface pad 1. Turn off your moni tor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion bene ath it to pro tec t the screen. 3. Re m o ve four screws and th e n re m o ve the Stand from the LCD monitor.
5. Monitor driver installation is co mpleted. This monitor dr iver is under cer tifying MS logo,and this installation don't damage your system.T he certified dr ive r will be posted on Samsung Monitor Homepage h ttp: / /www.
5. Click " Update Dr iver.. " and select " Install from a list or.. " then click " Next " button. 6. Select " Don't search ,I will.. " then click " Ne xt " and then c lick " Have disk ".
This monitor dr iver is under cer tifying MS logo,and this installa tion don't damage your system.The certified driver will be posted on Samsun g Monitor Homepage h ttp: / /www.samsu n g .com/ 9. Click the " Close " button then click " OK " button continually.
If you ca n see the " Digital Signature Not Found " window then click the " Yes "button. And click the " Fi nish " button the n the " Close " button. Microsoft ® Windows ® NT Operating System 1. Click Start , Settings , Control Panel , and then do uble -click Display icon.
How to install the Natural Color sof tware Insert the CD included with the Samsung monitor into the CD-ROM Dr ive. Then, the i nitial screen of the program N a tur al Color will be exe cuted. Click N atural Color on the initial scr een to install the Natural Color s oftware.
1. Use this button for open the on-scree n m enu and exits from the menu scree n o r closes screen adjus tment menu. 2. These buttons allow you to adjust items in the men u. 3. These buttons allow you to adjust items in the men u. 4. Activate a highli ghted menu item.
Menu Description Brightness Adjust Brightne ss. Source Menu Description Source Selects the Video signal while th e OSD is off. Picture Brightness Menu Description Play/Stop Brightness Adjust the Brigh tness. Direct Access Feature : When OSD is not on the scre en, Push the button to adjust brightness.
OSD Menu Description Play/Stop Language Follow these steps to c hange the language used in the me nu. You can choose one of seven language s. (English, German, Spanish, French, Ital ian, Swedish, Ru ssian) Note :The language chosen affects only the language of the OSD.
1. Use this button for open the on-scree n m enu and exits from the menu scree n o r closes screen adjus tment menu. 2. These buttons allow you to adjust items in the men u. 3. These buttons allow you to adjust items in the men u. 4. Activate a highli ghted menu item.
Menu Description Brightness Adjust Brightne ss. Picture Menu Description Play/Stop Brightness Adjust the Brigh tness. Direct Access Feature : When OSD is not on the scre en, Push the button to adjust brightness.
OSD Menu Description Play/Stop Language Follow these steps to c hange the language used in the me nu. You can choose one of seven language s. (English, German, Spanish, French, Ital ian, Swedish, Ru ssian) Note :The language chosen affects only the language of the OSD.
Overview | Inst all | OSD Mode | Color Calibration | Uninstall | Troubleshooting Overview What is MagicTune™? Monitor performance can vary due to the graphics card, host computer lighti ng conditions and other environmental factors. In order to get the best image on a monitor requires you to adjust it for your unique setting.
Overview | Install | OSD Mode | Color Calibration | Uninstall | Troubleshooting Install 1. Insert the install ation CD into the CD-ROM drive. 2. Click th e MagicT une™ inst allati on file. 3. Select installation Language, Click "Next". 4. When the InstallShiel d Wizard window appears, click "Next.
6. Choose a folder to install the MagicTune program. 7. Click "Install." 8. The "Installation Status" window appears..
9. Click "Finish." 10. When th e insta llation is compl ete, the MagicTu ne 2.5 executable icon appears on your desktop. Double-click the icon to start the program. 11. The following window appears if the installation is successful. Magictune e xecution icon may n ot appear depe nding on specification of computer system or monitor.
12. The following error message indicates that the system is using a video card that is not supported by MagicTune. Installation Problems The installation of MagicTune™ 2.5 can be affected by such factors as the video card, motherboard and the network environment.
Overview | Insta ll | OSD Mode | Color Calibration | Uninstall | Troubleshooting OSD Mode The OSD mode makes the adjustment of settings on all monitors easy. When selected , each tab on top of the control window displays the general descriptions of the sub-menu items for adjustment .
Allows the user to adjust the scr een settings to the d esired values. Color Tab Definition Adjusts the "warmth" of the m onitor background or image color. Brightness Contrast Re solution MagicBright n m l k j i n m l k j n m l k j n m l k j Brightness Makes the entire sc re en brighter or darker.
Image Tab Definition Adjusts the Fine , Coarse and Position values. Color Tone Color Contr ol Calibration n m l k j i n m l k j n m l k j Color Tone The tone of the color can be changed. z Warm - Normal - Cool z Custom Color Control Adjusts of th e monitor image colo r.
Option Tab De finition You can configure MagicTune using the fol lowing options. Image Set up P osition n m l k j i n m l k j Image Setup z Fine : Removes noise such as horizontal stripes. If the noise persists even after Fi ne tuni ng, repeat it after adjusting the frequency (clock speed).
Support Tab Definition Shows the Asset ID and t he versio n number o f the pr ogram, and allows you to use the Help feature. Preferences z Enable task tray m enu . - To access the MagicTune menus, click the icon on the [task tray menu]. The menus are not displayed if the [E nable System Tray] is deselected in [Options] ' [Basic Settings].
Overview | Insta ll | OSD Mode | Color Calibration | Unins tall | Troubleshooting Color Calibration 1. Color Calibration Color Calibration guides you to get opti mal color condition for your monit or. Proceed follow ing 5st eps for gettin g optim al mon itor co lor cond ition .
Press "Preview" button on the Color Calibration. The above picture will be shown. 1. Press "View Calibrated " button to see th e calibration effect which you adjusted. 2. Press "View Uncalibrated" button to see the original imag e.
Overview | Inst all | OSD Mode | Color Calibration | Uninstall | Troubleshooting Uninstall The MagicTune program can be removed only by us ing the "Add or Remove Programs" option of the Windows Control Panel. Perform the following steps remove MagicTune.
Overview | Installation | OSD Mode | Color Calibration | Uninsta ll | Troub leshooti ng Troubleshooting z MagicTune may not work in case monitor is replac ed or driver of graphic card is updated while MagicTune is operating. If so , please restart the system.
SyncMaster 510T / 710T / 910T / 711T / 912T / 701T Before calling for servic e, check the info rmation in this section to see if you can remedy any problems yourself. If you do need assistance , please call th e phone number on th e Information section or contact your de al er .
displayed. If th e display exceeds 85Hz, the display will work properl y but the "Not Optimum Mode","Recommand ed Mode 1280 x 1024 60Hz" message appears for one minute a nd the n disappears. Please change to the recommended mode duri ng this one -minute period.
changing the v ideo card. Has the video card been set properly? Set the video card by referri ng to the video card manual. There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found". Have you install ed the monitor driver? Install the monitor driver accordi n g to the Driver Installation Instructions .
functioni ng proper ly . Self-Test F eature Check 1. Turn off both your computer an d the monitor. 2. Unplug the video cable f rom the back of the computer. 3. Turn on the monitor. If the monitor is functioning prop erly, you will see a box in the illustration below .
SyncMaster 510N / 710N / 910N / 512N / 712N / 912N / 913N / 515V / 915V Before calling for servic e, check the information in this section to see if you can remedy any problems yourself. If you do need assistance , please call th e phone number on th e Information section or contact your de al er .
(The message is displ aye d again if the system is rebooted.) There is no image on the scree n. Is the pow er indicator on the monitor blinkin g at 1 seco nd intervals? The monitor is in PowerSaver mod e. press a key on th e keyboard to activate the monitor and restore the image on the screen.
5. If you have problems in installin g the adapter (video) driver, boot the comput er in Safe Mode, remove the Disp lay Adapter at the " Control Panel → System → De vice Admini strator " and then reboot the computer to reinstall the adapter (video) driver .
Warning Me ssages If there is something wr ong with the input signal , a message appe ars on the screen or the screen goes blank althou gh the power indicator LED is still on . The message may indicate that the monitor is out of scan rang e or tha t you need to check the signal cable.
General General Model Name SyncMaster 710T / 711T / 701T LCD Panel Size 17" Diagonal Display area 337.92 (H) x 270.336 (V) Pixel Pitch 0.264mm (H) x 0.
Less than 34W Dimensions (WxDxH)/ Weight (Simple Stand) Dimensions (WxDxH)/ Weight (Pivot Stand) 370.0 x 60.3 x 316.0 mm (Without Stand) 370.0 x 200,0 x 40 4 . 0 mm (with B a sic Stand) / 5.8 kg VESA Mounting Interface 100mm x 100mm (for use with Specia lty(Arm) Mounti ng hardware.
Preset Timing Modes If the signal transferred fro m the computer is th e sam e as the follo w ing Preset Timing Modes , the screen will be adjusted automatically. However, if the signa l differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the scre en as follows.
General General Model Name SyncMaster 910T / 912T LCD Panel Size 19" Diagonal Display area 376.32 (H) x 301.056 (V) Pixel Pitch 0.294mm (H) x 0.294mm (V) Type a-si TF T activ e matrix Synchroniza.
Less than 38W Dimensions (WxDxH)/ Weight (Simple Stand) Dimensions (WxDxH)/ Weight (Pivot Stand) 416.6 x 60.2 x 349.4 mm (Without Stand) 416.6 x 200 . 0 x 4 20 . 6 m m (with B a sic St a n d) / 7. 2 kg VESA Mounting Interface 100mm x 100mm (for use with Specia lty(Arm) Mounti ng hardware.
Preset Timing Modes If the signal transferred fro m the computer is th e sam e as the follo w ing Preset Timing Modes , the screen will be adjusted automatically. However, if the signa l differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the scre en as follows.
General General Model Name SyncMaster 710N / 712N LCD Panel Size 17" Diagonal Display area 337.92 (H) x 270.336 (V) Pixel Pitch 0.264mm (H) x 0.264mm (V) Type a-si TF T activ e matrix Synchroniza.
Dimensions (WxDxH)/ Weight (Simple Stand) 370.0 x 60.3 x 316.0 mm (Without Stand) 370.0 x 1 9 5. 4 x 38 6 . 5 mm (with B a sic Stand) / 4. 4 kg Dimensions (WxDxH)/ Weight (Pivot Stand) 370.0 x 60.3 x 316.0 mm (Without Stand) 370.0 x 200.0 x 40 4 . 0 mm (with B a sic Stand) / 5 .
If the signal transferred fro m the computer is th e sam e as the follo w ing Preset Timing Modes , the screen will be adjusted automatically. However, if the signa l differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the scre en as follows.
General General Model Name SyncMaster 910N / 912N / 913N / 915V LCD Panel Size 19" Diagonal Display area 376.32 (H) x 301.056 (V) Pixel Pitch 0.294mm (H) x 0.
Dimensions (WxDxH)/ Weight (Simple Stand) 416.6 x 60.2 x 349.4 mm (Without Stand) 416.6 x 21 5. 2 x 424.6 m m (with B a sic St a n d) / 5. 6 kg Dimensions (WxDxH)/ Weight (Pivot Stand) 416.6 x 60.2 x 349.4 mm (Without Stand) 416.6 x 200.0 x 42 0 . 6 m m (with B a sic St a n d) / 7.
If the signal transferred fro m the computer is th e sam e as the follo w ing Preset Timing Modes , the screen will be adjusted automatically. However, if the signa l differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the scre en as follows.
General General Model Name SyncMaster 510T LCD Panel Size 15" Diagonal Display area 304.1 (H) x 228.1 (V) Pixel Pitch 0.297 (H) x 0.297 (V) Type a-si TF T activ e matrix Synchronization Horizonta.
Less than 25W Dimensions (WxDxH)/ Weight 338.0 X 56.3 X 272.0 mm (Without Stand) 338.0 X 1 9 5. 4 X 3 42 . 5 m m (wi t h Basic Stand) / 3. 0 kg VESA Mounting Interface 75mm x 75mm (for use with Specialty(Arm) Mounting hardwar e.
Table 1. Preset Timing Mode s Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31. 469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31. 469 70.087 28.322 -/+ MAC, 640 x 480 35.
General General Model Name SyncMaster 510N / 512N LCD Panel Size 15" Diagonal Display area 304.1 (H) x 228.1 (V) Pixel Pitch 0.297 (H) x 0.297 (V) Type a-si TF T activ e matrix Synchronization Ho.
Dimensions (WxDxH)/ Weight 338.0 X 56.3 X 272.0 mm (Without Stand) 338.0 X 1 9 5. 4 X 3 42 . 5 m m (wi t h Basic Stand) / 3. 0 kg VESA Mounting Interface 75mm x 75mm (for use with Specialty(Arm) Mounting hardwar e.
Table 1. Preset Timing Mode s Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31. 469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31. 469 70.087 28.322 -/+ MAC, 640 x 480 35.
Service AUSTRALIA : Samsung Electron ics Australia Pt y Ltd. Customer Respons e Centre 7 Parkview Drive, Ho mebush Bay NSW 2127 Tel : 1300 362 603 http://www.samsung.com.au/ BRAZIL : Samsung El etronica da Amazonia Ltda. R. Prof. Manoelito de Ornellas, 303, Terro B Chacara Sto.
Ciencies, 55-65 (Poligono Pedrosa) 08908 Hospitalet de Llobregat (Barcelona) Tel. : (93) 261 67 00 Fax. : (93) 261 67 50 http://samsung.es/ FRANCE : SAMSUNG ELECTR ONICS FRANC E Service Paris Nord 2 66 rue des Vanesses BP 50116 Villepinte 95950 Roissy CDG Cedex Tel : 08 25 08 65 65 Fax : 01 48 63 06 38 http://www.
Panama Tel. : (507) 210-1122, 210-1133 Tel : 800-3278(FAST) http://www.samsung-latin.com/ PERU : Servicio In tegral Samsung A v.Ar g entina 1790 Lima1. Peru Tel: 51-1-336-8686 Fax: 51-1-336-8551 http://www.samsungperu.com/ PORTUGAL : SAMSUNG ELECTR ONICA PORTUG UESA S.
Fax. : (01952) 292 033 http://samsung service.co.uk/ U.S.A. : Samsung Electron ics America Service Divis ion 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 1-800-SAMSUNG (1-800-726-7864) http://samsungus a.com/moni tor/ Terms Dot Pitch The image on a moni tor is composed of re d, green and blue dots.
1ppm (one millionth) above is used for this p r o d uct. But the pix e ls of RE D , GRE E N, BLUE and WHI T E color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it wi thout uneasin ess.
FCC Information | IC Complia nce Noti ce | MPR II C ompliance European Not ice (Europ e only) | PCT Not ice | VCCI | TCO'95-Ec ological require ments for pe rsonal computers (TCO'95 appli ed.
MPR II Compliance This monitor complies with SWEDAC(MPR II) recommendation s for reduced electric and magnetic fields. PCT Notice VCCI This is a Class B product based on th e standard of the Voluntary Control Counci l for Interference by Informati on Technology Equipment (VCCI).
There are also other charac teristics of a monitor, such as energy consumpti on levels, that a re important from both the working and na tural environment viewpoints. Sin ce all types of conventional electricity gene ration have a ne gati ve effect on the environment (acidic and climate-infl uencing emissions, radioactive wa ste, etc.
electronics comp onents concerned with th e display unit. CFCs (freons) CFCs (freons) are sometimes used fo r washing printed circuit boards an d in the manufacturing of expanded foam for packagin g.
via the Internet, using the address: http://www.tco-info.com/ Environmen tal requirem ents Flame retardants Flame retar dants are present i n printed circuit boards, cables , wires, casings an d housings. Their purpose is to prevent, or at least to de lay th e spread of fi re .
Energy z Energy-saving mode after a certain time ?ben eficial both for the user and the en vironment z Electrical safety Emissions z Electromagnetic fields z Noise emissions Ecology z The product must.
This equipment ha s been tested and found to comply with the limits for medical d evices to the IEC 601-1-2:1994. Th ese limits are d esigned to pro vide reasonabl e protection against harmful interference in a typical medical insta llation.
PRODUCT INFORMATION (I mage Retention Free) LCD Monitors and TVs may have image retentio n when switching from one imag e to another especially after displaying a statio nary image for a long time. This guide is to demonstrate corre ct usage of LC D products in order to protect them from Image retention.
The best way to prote ct your monitor from Image retentio n is to set your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is opera ted under normal conditio ns. Normal conditions are defined as continuously changi ng video patterns.
An important point after buying a device Samsung 710T, 910T, 710N, 910N, 510T, 510N, 512N, 515V, 915V, 712N, 912N, 711T, 912T, 913N, 701T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung 710T, 910T, 710N, 910N, 510T, 510N, 512N, 515V, 915V, 712N, 912N, 711T, 912T, 913N, 701T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung 710T, 910T, 710N, 910N, 510T, 510N, 512N, 515V, 915V, 712N, 912N, 711T, 912T, 913N, 701T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung 710T, 910T, 710N, 910N, 510T, 510N, 512N, 515V, 915V, 712N, 912N, 711T, 912T, 913N, 701T you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung 710T, 910T, 710N, 910N, 510T, 510N, 512N, 515V, 915V, 712N, 912N, 711T, 912T, 913N, 701T will certainly help you make a decision on the purchase.
If you already are a holder of Samsung 710T, 910T, 710N, 910N, 510T, 510N, 512N, 515V, 915V, 712N, 912N, 711T, 912T, 913N, 701T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung 710T, 910T, 710N, 910N, 510T, 510N, 512N, 515V, 915V, 712N, 912N, 711T, 912T, 913N, 701T.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung 710T, 910T, 710N, 910N, 510T, 510N, 512N, 515V, 915V, 712N, 912N, 711T, 912T, 913N, 701T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung 710T, 910T, 710N, 910N, 510T, 510N, 512N, 515V, 915V, 712N, 912N, 711T, 912T, 913N, 701T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
